EN 62090:2003
(Main)Product package labels for electronic components using bar code and two- dimensional symbologies
Product package labels for electronic components using bar code and two- dimensional symbologies
Applies to labels on the packaging of electronic components for automatic handling. These labels use linear bar code and two-dimensional (2D) symbols. Bar code and 2D symbols markings are used, in general, for automatic identification and handling of components in electronics assembly lines. Intended applications include systems that automate the control of component packages during production, inventory and internal distribution.
Etiketten für Verpackungen elektronischer Bauelemente unter Anwendung von Strichcodierung und zweidimensionaler Symbologien
Etiquettes d'emballage de produits pour composants électroniques, utilisant un code à barres et une symbologie bidimensionelle
S'applique aux étiquettes sur l'emballage des composants électroniques pour opérations automatisées. Ces étiquettes utilisent un code à barres linéaire et symboles bidimensionnels (2D). En général, le code à barres et les marquages de symboles 2D sont utilisés pour l'identification et la manipulation automatiques de composants dans les chaînes de montage en électronique. Les applications prévues comprennent des systèmes qui automatisent le contrôle des boîtiers de composants pendant la production, l'inventaire et la distribution interne.
Product package labels for electronic components using bar code and two- dimensional symbologies
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 62090:2003
STANDARD
november 2003
Product package labels for electronic components using bar code and two-
dimensional symbologies
ICS 31.190; 35.040 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 62090
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2003
ICS 35.040; 31.190; 31.200
English version
Product package labels for electronic components
using bar code and two-dimensional symbologies
(IEC 62090:2002)
Etiquettes d'emballage de produits Etiketten für Verpackungen elektronischer
pour composants électroniques, Bauelemente unter Anwendung von
utilisant un code à barres Strichcodierung und zweidimensionaler
et une symbologie bidimensionelle Symbologien
(CEI 62090:2002) (IEC 62090:2002)
This European Standard was approved by CENELEC on 2003-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62090:2003 E
Foreword
The text of document 91/329/FDIS, future edition 1 of IEC 62090, prepared by IEC TC 91, Electronics
assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62090 on 2003-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-02-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annexes A, B, C and D are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62090:2002 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60286-1 NOTE Harmonized as EN 60286-1:1998 (not modified).
IEC 60286-2 NOTE Harmonized as EN 60286-2:1998 (not modified).
IEC 60286-3 NOTE Harmonized as EN 60286-3:1998 (not modified).
IEC 60286-4 NOTE Harmonized as EN 60286-4:1998 (not modified).
IEC 60286-5 NOTE Harmonized as EN 60286-5:1997 (modified).
IEC 60286-6 NOTE Harmonized as EN 60286-6:1998 (not modified).
__________
- 3 - EN 62090:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60194 - Printed board design, manufacture and - -
assembly - Terms and definitions
1)
ISO/IEC 15417 - Information Technology - Automatic - -
identification and data capture
techniques - Bar code symbology
specification - Code 128
1)
ISO/IEC 15418 - Information technology - EAN/UCC - -
application identifiers and fact data
identifiers and maintenance
1)
ISO/IEC 15434 - Information technology - Transfer syntax - -
for high capacity ADC media
1)
ISO/IEC 15438 - Information technology - Automatic - -
identification and data capture
techniques - Bar code symbology
specifications - PDF417
ISO/IEC 15459 Series Information technology - Unique - -
identification of transport units
1)
ISO/IEC 15459-1 - Information technology - Unique - -
identification of transport units
Part 1: General
1)
ISO/IEC 16022 - Information technology - International - -
symbology specification - Data matrix
1)
ISO/IEC 16388 - Information technology - Automatic - -
identification and data capture
techniques - Bar code symbology
specifications - Code 39
1)
Undated reference.
Publication Year Title EN/HD Year
1)
ISO/IEC 18004 - Information technology - Automatic - -
identification and data capture
techniques - Bar code symbology -
QR Code
1) 2)
ISO 3166 - Codes for the representation of names EN 23166 1993
of countries and their subdivisions
1)
ISO 8601 - Data elements and interchange formats - -
- Information interchange -
Representation of dates and times
2)
Valid edition at date of issue.
NORME
CEI
INTERNATIONALE IEC
INTERNATIONAL
Première édition
STANDARD
First edition
2002-11
Etiquettes d'emballage de produits
pour composants électroniques, utilisant
un code à barres et une symbologie
bidimensionnelle
Product package labels for electronic
components using bar code and
two-dimensional symbologies
© IEC 2002 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
X
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue
62090 © IEC:2002 – 3 –
CONTENTS
FOREWORD . 5
1 Scope and object . 7
2 Normative references. 7
3 Definitions . 9
4 Label data content and requirements . 9
4.1 Data elements . 9
4.2 Data representation .19
4.3 Rules for encoding of mandatory and optional data elements in machine-
readable symbols and human-readable information .25
4.4 Data carriers.31
4.5 Label size, layout, and location.37
Annex A (informative) EIAJ use of 3N data identifier on component packages.45
Annex B (informative) Glossary.51
Annex C (informative) Choice of symbologies in label design .75
Annex D (informative) Quality aspects of labels – Label adhesive characteristics and
mark durability .79
Bibliography.87
Figure 1 – Example of encoding data identifier data in a 2D symbol .21
Figure 2 – Examples of terminology .23
Figure 3 – Label with a linear bar code and human-readable information .37
Figure 4 – Label with a 2D symbol and human-readable information .39
Figure 5 – Label with a linear bar code, a 2D symbol and human-readable information .39
Figure 6 – Typical label locations .43
Figure A.1 – Examples of label and label layout .49
Figure C.1 – Flowchart to select bar code symbologies for use in label design.77
Figure D.1 – Adhesion tester.85
Table 1 – Data identifiers (DIs) used in item identification .11
Table 2 – DIs used to identify quantity.13
Table 3 – DIs used for traceability information.15
Table 4 – DIs used for supplier identification.17
Table 5 – Country of origin DI .17
Table 6 – Data elements, maximum length, and data status for product package labels .29
Table 7 – Summary of rules for encoding in machine-readable symbols and printing in
human-readable information.31
Table 8 – Product package label symbol requirements − Code 39 .33
Table 9 – Product package label symbol requirements − Code 128 .33
Table A.1 – Data elements of bar code pattern (EIAJ) .45
Table A.2 – Symbol requirements of bar code pattern (EIAJ).45
62090 © IEC:2002 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PRODUCT PACKAGE LABELS FOR ELECTRONIC COMPONENTS
USING BAR CODE AND TWO-DIMENSIONAL SYMBOLOGIES
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62090 has been prepared by IEC technical committee 91:
Electronics assembly technology.
The text of this standard is based on the following documents:
FDIS Report on voting
91/329/FDIS 91/344/RVD
Full information on the voting for the ap
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.