EN 60743:2001
(Main)Live working - Terminology for tools, equipment and devices
Live working - Terminology for tools, equipment and devices
Applies to terminology for tools and equipment used in live working. This standard is not intended to be a dictionary giving detailed definitions of all the terms used in live working, but only the necessary details, without indications of their components and their methods of use, to permit identification of the tools and equipment and to standardize their names.
Arbeiten unter Spannung - Terminologie für Werkzeuge, Ausrüstungen und Geräte
Travaux sous tension - Terminologie pour l'outillage, le matériel et les dispositifs
S'applique à la terminologie pour l'outillage et le matériel utilisé dans les travaux sous tension. Cette norme n'est pas un dictionnaire donnant des définitions détaillées de tous les termes utilisés pour les travaux sous tension, mais est destinée à n'apporter que des détails nécessaires, sans indication de composantes ou de modes d'emploi, pour permettre l'identification de l'outillage et du matériel, et pour normaliser leurs noms.
Delo pod napetostjo – Izrazje za orodje in opremo (IEC 60743:2001)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2003
1DGRPHãþD
SIST EN 60743:2000
Delo pod napetostjo – Izrazje za orodje in opremo (IEC 60743:2001)
Live working - Terminology for tools, equipment and devices
Arbeiten unter Spannung - Terminologie für Werkzeuge, Ausrüstungen und Geräte
Travaux sous tension - Terminologie pour l'outillage, le matériel et les dispositifs
Ta slovenski standard je istoveten z: EN 60743:2001
ICS:
01.040.13 Varstvo okolja in zdravja. Environment and health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60743
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2001
ICS 29.240.20;29.260;29.260.99 Supersedes EN 60743:1996
English version
Live working -
Terminoloy for tools, equipment and devices
(IEC 60743:2001)
Travaux sous tension - Arbeiten unter Spannung -
Terminologie pour l'outillage, le matériel et Terminologie für Werkzeuge,
les dispositifs Ausrüstungen und Geräte
(CEI 60743:2001) (IEC 60743:2001)
This European Standard was approved by CENELEC on 2001-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60743:2001 E
Foreword
The text of document 78/393/FDIS, future edition 2 of IEC 60743, prepared by IEC TC 78, Live
working, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60743 on 2001-12-01.
This European Standard supersedes EN 60743:1996.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-12-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60743:2001 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60743:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-195 1998 International Electrotechnical --
Vocabulary (IEV)
Chapter 195: Earthing and protection
against electric shock
IEC 60050-651 1999 Part 651: Live working - -
ISO/IEC Guide 51 1990 Guidelines for the inclusion of safety--
aspects in standards
ISO 472 1999 Plastics - Vocabulary EN ISO 472 2001
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2001-11
Travaux sous tension –
Terminologie pour l'outillage,
le matériel et les dispositifs
Live working–
Terminology for tools,
equipment and devices
IEC 2001 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
X
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
60743 IEC:2001 – 3 –
CONTENTS
FOREWORD.7
1 General .9
1.1 Scope.9
1.2 Normative references .9
2 General terms .9
2.1 Live working and methods .9
2.3 Difference between insulated and insulating tools .11
3 Insulating sticks.20
3.1 Hand sticks .20
3.2 Support sticks .25
3.3 Miscellaneous .27
4 Attachable universal devices (fittings) .28
4.1 Splined end devices .28
4.2 Clevis and tongue stick devices.37
4.3 Miscellaneous .38
5 Insulating protective covers and similar assemblies.39
5.1 Shaped covers .39
5.2 Similar assemblies .42
6 By-passing equipment .44
6.1 Shunting equipment.44
6.2 Shunts.45
7 Small hand tools.46
7.1 Insulating equipment .46
7.2 Insulated equipment .47
8 Personal protective equipment .52
8.1 Mechanical protection .52
8.2 Electrical protection.54
8.3 Mechanical and electrical protection .59
8.4 Miscellaneous .59
9 Equipment for climbing and/or positioning a worker .60
9.1 Positioning equipment .60
10 Handling and anchoring equipment.67
10.1 Ropes, slings, rope block and accessories .67
10.2 Yokes and accessories.69
10.3 Saddles and accessories.70
10.4 Miscellaneous .73
11 Detecting and diagnostic devices.75
11.1 Mechanical detectors and testers .75
11.2 Electrical detectors and testers .77
12 Hydraulic equipment.80
12.1 Hydraulic equipment.80
60743 IEC:2001 – 5 –
13 Support assembly equipment.82
14 Stringing equipment.88
15 Earthing and short-circuiting equipment.92
16 Live cleaning .94
Bibliography.96
60743 IEC:2001 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LIVE WORKING –
TERMINOLOGY FOR TOOLS, EQUIPMENT AND DEVICES
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60743 has been prepared by IEC technical committee 78: Live
working.
This second edition cancels and replaces the first edition, published in 1983, and its
amendment 1 (1995), and constitutes a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
78/393/FDIS 78/403/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
The committee has decided that the contents of this publication will remain unchanged until 2006.
At this
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.