EN 62714-1:2014

Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 1: Architecture and general requirements

IEC 62714-1:2014 is a solution for data exchange focusing on the domain of automation engineering. The data exchange format defined in the IEC 62714 series (Automation Markup Language, AML) is an XML schema based data format and has been developed in order to support the data exchange in a heterogeneous engineering tools landscape. The goal of AML is to interconnect engineering tools in their different disciplines, e.g. mechanical plant engineering, electrical design, process engineering, process control engineering, HMI development, PLC programming, robot programming, etc.

Datenaustauschformat für Planungsdaten industrieller Automatisierungssysteme - Automation markup language Teil 1: Architektur und allgemeine Festlegungen

Format d’échange de données techniques pour une utilisation dans l’ingénierie des systèmes d'automatisation industrielle - Automation markup language - Partie 1: Architecture et exigences générales

L'IEC 62714-1:2014 constitue une approche de l'échange de données qui cible le domaine de l'ingénierie de l'automatisation. Le format d'échange de données défini dans la série CEI 62714 (Automation Markup Language, AML) est un format de données de type schéma XML mis au point afin de venir à l'appui de l'échange de données dans un environnement d'outils techniques hétérogène. L'objectif de l'AML est l'interconnexion des outils techniques dans leurs différentes disciplines, par exemple, ingénierie des installations mécaniques, études d'électricité, ingénierie de procédés, ingénierie de commande de processus, développement des IHM, programmation PLC, programmation de robots, etc.

Oblika izmenjave tehničnih podatkov za uporabo v industrijskem inženiringu avtomatizacije sistemov - (AvtomatizacijaML) - 1. del: Arhitektura in splošne zahteve (IEC 62714-1:2014)

Ta del standarda IEC 62714 navaja splošne zahteve in zgradbo AML za oblikovanje inženirskih podatkov, ki se izmenjujejo med inženirskimi orodji za industrijsko avtomatizacijo in kontrolne sisteme. Določbe standarda se uporabljajo za izvozne/uvozne aplikacije povezanih orodij.
Ta del standarda IEC 62714 ne določa podrobnosti postopka izmenjave podatkov ali implementacijskih zahtev za uvozna/izvozna orodja.

General Information

• Status: Withdrawn
• Publication Date: 16-Oct-2014
• Withdrawal Date: 30-Jul-2017
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.060 - Languages used in information technology
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Jun-2021
• Completion Date: 04-Jun-2021
• Ref Project: SIST EN 62714-1:2015 - Engineering data exchange format for use in industrial automation systems engineering - (AutomationML) - Part 1: Architecture and general requirements (IEC 62714-1:2014)

Relations

• Replaced By: EN IEC 62714-1:2018 - Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 1: Architecture and general requirements
• Effective Date: 11-Oct-2016

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2015
2EOLNDL]PHQMDYHWHKQLþQLKSRGDWNRY]DXSRUDERYLQGXVWULMVNHPLQåHQLULQJX
DYWRPDWL]DFLMHVLVWHPRY$YWRPDWL]DFLMD0/GHO$UKLWHNWXUDLQVSORãQH
]DKWHYH,(&
Engineering data exchange format for use in industrial automation systems engineering -
(AutomationML) - Part 1: Architecture and general requirements (IEC 62714-1:2014)
Datenaustauschformat für Planungsdaten industrieller Automatisierungssysteme
(AutomationML) - Teil 1: Architektur und allgemeine Festlegungen (IEC 62714-1:2014)
Format d'échange de données techniques pour une utilisation dans l'ingénierie des
systèmes d'automatisation industrielle - AutomationML - Partie 1: Architecture et
exigences générales (CEI 62714-1:2014)
Ta slovenski standard je istoveten z: EN 62714-1:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62714-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.060; 35.240.50

English Version
Engineering data exchange format for use in industrial
automation systems engineering - Part 1: Architecture and
General Requirements
(IEC 62714-1:2014)
Format d'échange de données techniques pour une Datenaustauschformat für Planungsdaten industrieller
utilisation dans l'ingénierie des systèmes d'automatisation Automatisierungssysteme (AutomationML) - Teil 1:
industrielle - AutomationML - Partie 1: Architecture et Architektur und allgemeine Festlegungen
exigences générales (IEC 62714-1:2014)
(CEI 62714-1:2014)
This European Standard was approved by CENELEC on 2014-07-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62714-1:2014 E
Foreword
The text of document 65E/385/FDIS, future edition 1 of IEC 62714-1, prepared by SC 65E “Devices
and integration in enterprise systems” of IEC/TC 65 “Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN
62714-1:2014.
The following dates are fixed:
• latest date by which the document has to be (dop) 2015-05-01
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-07-31
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.

Endorsement notice
The text of the International Standard IEC 62714-1:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60027 (Series) NOTE Harmonized as EN 60027 (Series).
IEC 62264-1 NOTE Harmonized as EN 62264-1.
IEC 62714-2 NOTE Harmonized as EN 62714-2
ISO 80000-1 NOTE Harmonized as EN ISO 80000-1.

- 3 - EN 62714-1:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62424 2008 Representation of process control EN 62424 2009
engineering - Requests in P&I diagrams
and data exchange between P&ID tools
and PCE-CAE tools
IEC 62714 series Engineering data exchange format for use EN 62714 series
in industrial automation systems
engineering
ISO/IEC 9834-8 -  Information technology - Procedures for - -
the operation of object identifier registration
authorities: General procedures and top
arcs of the international object identifier
tree
ISO/PAS 17506 -  Industrial automation systems and - -
integration - COLLADA digital asset
schema specification for 3D visualization of
industrial data
IEC 62714-1 ®
Edition 1.0 2014-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Engineering data exchange format for use in industrial automation systems

engineering – Automation markup language –

Part 1: Architecture and general requirements

Format d’échange de données techniques pour une utilisation dans l’ingénierie

des systèmes d'automatisation industrielle – Automation markup language –

Partie 1: Architecture et exigences générales

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XC
ICS 25.040.40; 35.06; 35.240.50 ISBN 978-2-8322-1554-8

– 2 – IEC 62714-1:2014 © IEC 2014
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 11
2 Normative references . 11
3 Terms, definitions and abbreviations . 11
3.1 Terms and definitions . 11
3.2 Abbreviations . 14
4 Conformity . 14
5 AML architecture specification . 15
5.1 General . 15
5.2 General AML architecture . 15
5.3 AML document versions . 16
5.4 Meta information about the AML source tool . 17
5.5 Object identification . 18
5.6 AML relations specification . 19
5.6.1 General . 19
5.6.2 Parent-child-relations between AML objects . 19
5.6.3 Parent-child-relations between AML classes . 20
5.6.4 Inheritance relations . 21
5.6.5 Class-instance-relations . 21
5.6.6 Instance-instance-relations . 23
5.7 AML document reference specification . 25
5.7.1 General . 25
5.7.2 Referencing COLLADA documents . 25
5.7.3 Referencing PLCopen XML documents . 25
5.7.4 Referencing additional documents . 25
6 AML base libraries . 25
6.1 General . 25
6.2 General provisions . 25
6.3 AML interface class library – AutomationMLInterfaceClassLib . 26
6.3.1 General . 26
6.3.2 InterfaceClass AutomationMLBaseInterface . 28
6.3.3 InterfaceClass Order . 28
6.3.4 InterfaceClass PortConnector . 29
6.3.5 InterfaceClass PPRConnector . 29
6.3.6 InterfaceClass ExternalDataConnector . 29
6.3.7 InterfaceClass COLLADAInterface . 30
6.3.8 InterfaceClass PLCopenXMLInterface . 30
6.3.9 InterfaceClass Communication . 30
6.3.10 InterfaceClass SignalInterface . 31
6.4 AML basic role class library – AutomationMLBaseRoleClassLib . 31
6.4.1 General . 31
6.4.2 RoleClass AutomationMLBaseRole . 33
6.4.3 RoleClass Group . 33
6.4.4 RoleClass Facet . 34

IEC 62714-1:2014 © IEC 2014 – 3 –
6.4.5 RoleClass Port . 34
6.4.6 RoleClass Resource . 36
6.4.7 RoleClass Product . 36
6.4.8 RoleClass Process . 37
6.4.9 RoleClass Structure . 37
6.4.10 RoleClass ProductStructure . 37
6.4.11 RoleClass ProcessStructure . 38
6.4.12 RoleClass ResourceStructure . 38
6.4.13 RoleClass PropertySet. 38
7 Modelling of user-defined data . 39
7.1 General . 39
7.2 User-defined attributes. 39
7.3 User-defined InterfaceClasses . 39
7.4 User-defined RoleClasses . 40
7.5 User-defined SystemUnitClasses . 41
7.6 User-defined InstanceHierarchies . 41
8 Extended AML concepts . 42
8.1 General overview . 42
8.2 AML Port object .
...