EN 61228:2008

Fluorescent ultraviolet lamps used for tanning - Measurement and specification method

This International Standard describes the method of measuring, evaluating and specifying the characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This second edition cancels and replaces the first edition published in 1993 and its Amendment 1 (1996). In this second edition, an equivalency code for the lamps is introduced. This equivalency code characterises the spectral energy distribution and is to be applied when replacing lamps in tanning equipment.

UV-Leuchtstofflampen für Bräunungszwecke - Verfahren zur Messung und Beschreibung

Lampes fluorescentes à ultraviolet utilisées pour le bronzage - Méthode de mesure et de spécification

La présente Norme internationale décrit la méthode pour mesurer, évaluer et spécifier les caractéristiques des lampes fluorescentes à ultraviolet utilisées dans les appareils de bronzage. Elle inclut des spécifications particulières concernant le marquage de telles lampes. Cette deuxième édition annule et remplace la première édition parue en 1993 et son Amendement 1 (1996). Dans cette deuxième édition, un code d'équivalence pour les lampes est introduit. Ce code d'équivalence caractérise la distribution d'énergie spectrale et doit être appliqué lors du remplacement de lampes dans les équipements de bronzage.

Fluorescenčne ultravijolične sijalke za umetno sončenje - Merjenje in specifikacijska metoda (IEC 61228:2008)

General Information

• Status: Withdrawn
• Publication Date: 13-Mar-2008
• Withdrawal Date: 31-Jan-2011
• ICS: 17.240 - Radiation measurements
• ICS: 29.140.01 - Lamps in general
• ICS: 97.170 - Body care equipment
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34A - IEC_SC_34A
• Parallel Committee: IEC/SC 34A - IEC_SC_34A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 09-Dec-2023
• Completion Date: 09-Dec-2023
• Ref Project: SIST EN 61228:2008 - Fluorescent ultraviolet lamps used for tanning - Measurement and specification method

Relations

• Replaces: EN 61228:1994/A1:1996 - Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
• Effective Date: 28-Jan-2023
• Replaces: EN 61228:1994 - Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 61228:2020 - Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
• Effective Date: 14-Aug-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61228:2008
01-maj-2008
1DGRPHãþD
SIST EN 61228:2001
SIST EN 61228:2001/A1:2001
)OXRUHVFHQþQHXOWUDYLMROLþQHVLMDONH]DXPHWQRVRQþHQMH0HUMHQMHLQ
VSHFLILNDFLMVNDPHWRGD,(&
Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
UV-Leuchtstofflampen für Bräunungszwecke - Verfahren zur Messung und Beschreibung
Lampes fluorescentes à ultraviolet utilisées pour le bronzage - Méthode de mesure et de
spécification
Ta slovenski standard je istoveten z: EN 61228:2008
ICS:
17.240 Merjenje sevanja Radiation measurements
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
97.170 Oprema za nego telesa Body care equipment
SIST EN 61228:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61228:2008

---------------------- Page: 2 ----------------------

SIST EN 61228:2008

EUROPEAN STANDARD
EN 61228

NORME EUROPÉENNE
March 2008
EUROPÄISCHE NORM

ICS 17.240; 29.140.01; 97.170 Supersedes EN 61228:1994 + A1:1996


English version


Fluorescent ultraviolet lamps used for tanning -
Measurement and specification method
(IEC 61228:2008)


Lampes fluorescentes à ultraviolet UV-Leuchtstofflampen
utilisées pour le bronzage - für Bräunungszwecke -
Méthode de mesure et de spécification Verfahren zur Messung und Beschreibung
(CEI 61228:2008) (IEC 61228:2008)




This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61228:2008 E

---------------------- Page: 3 ----------------------

SIST EN 61228:2008
EN 61228:2008 - 2 -
Foreword
The text of document 34A/1242/FDIS, future edition 2 of IEC 61228, prepared by SC 34A, Lamps, of
IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61228 on 2008-02-01.
This European Standard supersedes EN 61228:1994 + A1:1996.
In EN 61128:2008, an equivalency code for the lamps is introduced. This equivalency code characterises
the spectral energy distribution and is to be applied when replacing lamps in tanning equipment.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61228:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61228:2008
- 3 - EN 61228:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60050-845 1987 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 845: Lighting


1) 2)
IEC 60081 - Double-capped fluorescent lamps - EN 60081 1998
Performance spec
...