General purpose rigid coaxial transmission lines and their associated flange connectors - Part 1: General requirements and measuring methods

Gives general requirements for general purpose rigid coaxial transmission lines and their associated flange connectors in order to ensure compatibility and interchangeability, gives the tolerances necessary to ensure adequate electrical performance and the test methods.

Starre Koaxial-Kabel und zugehörige Flanschverbinder - Teil 1: Allgemeine Anforderungen und Meßverfahren

Lignes de transmission coaxiales rigides et leurs connecteurs à brides associés à usage général - Partie 1: Prescriptions générales et méthodes de mesure

Spécifie la procédure applicable aux lignes de transmission coaxiales rigides et leurs connecteurs à brides associés afin d'assurer leur compatibilité et leur interchangeabilité, donne les tolérances nécessaires pour assurer des performances électriques adéquates et les méthodes d'essai.

Stabilne koaksialne prenosne zveze za splošen namen in njihovi pripadajoči prirobni konektorji; 1. del: splošne zahteve in merilne metode *

General Information

Status
Published
Publication Date
10-Sep-1978
Withdrawal Date
11-Mar-1979
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
11-Sep-1978
Completion Date
11-Sep-1978

Buy Standard

Standardization document
HD 350.1 S1:2004
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST HD 350.1 S1:2004

STANDARD
september 2004
Stabilne koaksialne prenosne zveze za splošen namen in njihovi pripadajoči
prirobni konektorji; 1. del: splošne zahteve in merilne metode *
Splošnonamenski togi koaksialni vodi in pripadajoči prirobni konektorji - 1. del:
Splošne zahteve in merilne metode
ICS 33.120.10; 33.120.30 Referenčna številka
SIST HD 350.1 S1:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

NORME
CEI
INTERNATIONALE
IEC
60339-1
INTERNATIONAL
Première édition
STAN
DARD
First edition
1971-01
Lignes de transmission coaxiales rigides et leurs
connecteurs à brides associés à usage général
Première partie:
Prescriptions générales et méthodes de mesure
General purpose rigid coaxial transmission lines
and their associated flange connectors
Part 1:
General requirements and measuring methods
© IEC 1971
Droits de reproduction réservés —
Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni
No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun
any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo-
including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
L
PRICE CODE
International Electrotechnical Commission
IEC
Me,tayHaponHae 3nenrporexHHVecKaa HOMHCCHA
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue

---------------------- Page: 2 ----------------------

— 3 —
CONTENTS
Page
FOREWORD 5
PREFACE 5
Clause
1. Scope 7
2. Object 7
SECTION ONE — GENERAL
3. Terminology 7
4. Type designation 13
5. Standard atmospheric conditions for testing 13
6.
Visual inspection 13
7. Marking 15
SECTION TWO — MECHANICAL REQUIREMENTS
8. General requirements 15
9. Ellipticity 17
10. Curvature 17
11. Insertion and withdrawal force of inner connector 17
12. Pressurization 17
SECTION THREE — ELECTRICAL REQUIREMENTS
13. Characteristic impedance 19
14. Attenuation 19
15. Voltage standing wave ratio (v.s.w.r)  19
Maximum power rating 16. 19
17. Voltage test 19
18. Insulation resistance 21
19. Discharge test (corona test) 21

---------------------- Page: 3 ----------------------

— 5 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
GENERAL PURPOSE RIGID COAXIAL TRANSMISSION
LINES AND THEIR ASSOCIATED FLANGE CONNECTORS
Part 1 : General requirements and measuring methods
FOREWORD
I) The formal decisions or agreements of the f E C on technical matters, prepared by Technical Committees on which all the
National Committees having a special interest therein are represented, express, as nearly as possible, an international
consensus of opinion on the subjects dealt with.
2) They have the form of recommendations for international use and they are accepted by the National Committees in that
sense.
3) In order to promote this international unification, the I E C expresses the wish that all National Committees having as
yet no national rules, when preparing such rules, should use the I E C recommendations as the fundamental basis for these
rules in so far as national conditions will permit.
4) The desirability is recognized of extending international agreement on these matters through an endeavour to harmonize
national standardization rules with these recommendations in so far as national conditions will permit. The National
Committees pledge their influence towards that end.
5) The I E C has not laid down any procedure concerning marking as an indication of approval and has no responsibility
when an item of equipment is declared to comply with one of its recommendations.
PREFACE
This Recommendation has been prepared by Sub-Committee 46A, R.F. Cables and their Accessories,
of I E C Technical Committee No. 46, Cables, Wires and Waveguides for Telecommunication Equipment.
It contains Part 1 of the complete Recommendation for general purpose rigid coaxial transmission lines
and their associated flange connectors.
Part 2 will include, in future, the standardized dimensions of rigid coaxial transmission lines and their
associated flange connectors.
A first draft was discussed at the meeting held in London in 1968, as a result of which a revised draft was
submitted to the National Committees for approval under the Six Months' Rule in January 1969.
The following countries voted explicitly in favour of publication of Part 1:
Australia Netherlands
Belgium Poland
Canada Romania
Czechoslovakia Sweden
Denmark Switzerland
Israel Turkey
Italy United Kingdom
Japan Un
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.