iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50110-2:2021

(Main)

Operation of electrical installations - Part 2: National annexes

Operation of electrical installations - Part 2: National annexes

Transparency on national legislation and standards to be obeyed when working

Betrieb von elektrischen Anlagen - Teil 2: Nationale Anhänge

Exploitation des installations électriques - Partie 2: Annexes nationales

Obratovanje električnih postrojev - 2. del: Nacionalni dodatki

General Information

Status
Published
Publication Date
25-Mar-2021
Withdrawal Date
22-Dec-2022
ICS
29.240 - Power transmission and distribution networks
Technical Committee
CLC/BTTF 62-3 - Operation of electrical installations
Drafting Committee
CLC/BTTF 62-3 - Operation of electrical installations
Current Stage
6060 - Document made available - Publishing
Start Date
26-Mar-2021
Due Date
20-Apr-2019
Completion Date
26-Mar-2021
Ref Project
SIST EN 50110-2:2021 - Operation of electrical installations - Part 2: National annexes

Relations

Replaces
EN 50110-2:2010 - Operation of electrical installations - Part 2: National annexes
Effective Date
22-Jan-2023
Replaced By
EN 50110-2:2023 - Operation of electrical installations - Part 2: National annexes
Effective Date
26-Oct-2021

Buy Standard

EN 50110-2:2021EN 50110-2:2021
PreviousNext
Standard
EN 50110-2:2021
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50110-2:2021
01-maj-2021
Nadomešča:
SIST EN 50110-2:2010
Obratovanje električnih postrojev - 2. del: Nacionalni dodatki
Operation of electrical installations - Part 2: National annexes
Betrieb von elektrischen Anlagen - Teil 2: Nationale Anhänge
Exploitation des installations électriques - Partie 2: Annexes nationales
Ta slovenski standard je istoveten z: EN 50110-2:2021
ICS:
29.240.01 Omrežja za prenos in Power transmission and
distribucijo električne energije distribution networks in
na splošno general
SIST EN 50110-2:2021 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50110-2:2021

---------------------- Page: 2 ----------------------
SIST EN 50110-2:2021


EUROPEAN STANDARD EN 50110-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2021
ICS 29.240 Supersedes EN 50110-2:2010 and all of its amendments
and corrigenda (if any)
English Version
Operation of electrical installations - Part 2: National annexes
Exploitation des installations électriques - Partie 2: Annexes Betrieb von elektrischen Anlagen - Teil 2: Nationale
nationales Anhänge
This European Standard was approved by CENELEC on 2019-12-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50110-2:2021 E

---------------------- Page: 3 ----------------------
SIST EN 50110-2:2021
EN 50110-2:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Austria (AT) . 5
2 Belgium (BE) . 6
3 Bulgaria (BG) — No reply — . 7
4 Croatia (HR) — No reply — . 7
5 Cyprus (CY) — No reply — . 8
6 Czech Republic (CZ) . 8
7 Denmark (DK). 12
8 Estonia (EE) . 12
9 Finland (FI) . 13
10 Former Yugoslav Republic of Macedonia (MK) — No reply — . 14
11 France (FR) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50110-2:2023(Main)
Operation of electrical installations - Part 2: National annexes
SIST EN 50110-2:2023

The European Standard EN 50110 series consists of two parts: - the first part, EN 50110 1, contains minimum requirements valid for all CENELEC countries and some additional informative annexes dealing with safe working; - the second part, prEN 50110 2, is a set of national annexes (one per each member country) which specify either additional safety requirements actually in force or national supplements to the minimum requirements set by EN 50110-1. The national annexes are the responsibility of an have to be maintained by the respective member country. National Committees shall notify CENELEC of any changes needed to their national annex.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50110-2:2023(Main)
Operation of electrical installations - Part 2: National annexes
SIST EN 50110-2:2023

The European Standard EN 50110 series consists of two parts: - the first part, EN 50110 1, contains minimum requirements valid for all CENELEC countries and some additional informative annexes dealing with safe working; - the second part, prEN 50110 2, is a set of national annexes (one per each member country) which specify either additional safety requirements actually in force or national supplements to the minimum requirements set by EN 50110-1. The national annexes are the responsibility of an have to be maintained by the respective member country. National Committees shall notify CENELEC of any changes needed to their national annex.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62751-1:2014/A2:2022(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
SIST EN 62751-1:2014/A2:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50171:2021(Main)
Central safety power supply systems
SIST EN 50171:2022

This document specifies the general requirements for central power supply systems for an independent energy supply to essential safety equipment. This document covers systems that are permanently connected to AC supply voltages not exceeding 1 000 V and use batteries as an alternative power source. Central safety power supply systems are intended to ensure energy supply to emergency escape lighting in the event of normal supply failure and could be suitable for energizing other essential safety equipment, for example: - electric circuits of automatic fire extinguishing installations; - paging systems and signalling safety installations; - smoke extraction equipment; - carbon monoxide warning systems; - special safety installations related to specific buildings, e.g. high-risk areas. The power supply of CPS systems is expected to be dedicated only to the essential safety equipment, and not for other type of loads such as general purpose IT or industrial systems etc. Combinations of the aforementioned safety equipment types can be used together on the same central safety power supply system providing the availability for safety equipment loads is not impaired. A fault occurring in a circuit is expected to not cause the interruption in any other circuit used to supply essential safety equipment. Schematic representations of typical central safety power supply equipment are depicted in Clause 4. Power supply systems for fire alarm equipment that are covered by EN 54 (series) are excluded.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60895:2020(Main)
Live working - Conductive clothing
SIST EN IEC 60895:2020

IEC 60895:2020 is applicable to conductive clothing, worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a reduction of electric field inside the clothing. This document is applicable to conductive clothing assembled from a conductive garment (jackets and trousers or coveralls forming a one-piece garment) and from conductive component parts (gloves, hoods or helmets, shoes or boots, overshoe socks and socks) in electrical systems with nominal voltage up to 1 000 kV AC and up to ±800 kV DC. This document does not indicate values of protection from the effects of the electric arc, because any value indicated would not guarantee the necessary protection from the effects of electric arcs, or the operator would need to wear very heavy and rigid conductive clothing, which would not allow the execution of the work in safety. The products designed and manufactured according to this document contribute to the safety of the users provided they are used by persons trained for the work, in accordance with the live working methods and the instructions for use. This third edition cancels and replaces the second edition, published in 2002. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) increase of the use up to 1 000 kV AC and ±800 kV DC; b) introduction of two classes of conductive clothing with different electrical requirements; c) revision of the electrical requirements of conductive clothing; d) definition of specific resistance values for each component part of the conductive clothing; e) introduction of conductive helmet and conductive scarf as component parts of conductive clothing; f) introduction of mechanical requirements and new tests for fabrics; g) update of the cleaning test procedures; h) revision of the efficiency test of the conductive clothing to improve the feasibility and repeatability; i) preparation of the elements of classification of defects, and general application of IEC 61318:2007; j) the normative Annex B for the classification of tests has been replaced by normative Annex C for the general type tests procedure, the normative Annex D for the classification of defects and the informative Annex E providing the justification for the classification of defects; k) the normative Annex C on sampling procedure has been deleted (not applicable according to IEC 61318:2007); l) modification of the recommended frequency of the periodic tests.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62751-2:2014/A1:2019(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters
SIST EN 62751-2:2014/A1:2020

This part of IEC 62751 gives the detailed method to be adopted for calculating the power
losses in the valves for an HVDC system based on the “modular multi-level converter”, where
each valve in the converter consists of a number of self-contained, two-terminal controllable
voltage sources connected in series. It is applicable both for the cases where each modular
cell uses only a single turn-off semiconductor device in each switch position, and the case
where each switch position consists of a number of turn-off semiconductor devices in series
(topology also referred to as “cascaded two-level converter”). The main formulae are given for
the two-level “half-bridge” configuration but guidance is also given in Annex A as to how to
extend the results to certain other types of MMC building block configuration.
The standard is written mainly for insulated gate bipolar transistors (IGBTs) but may also be
used for guidance in the event that other types of turn-off semiconductor devices are used.
Power losses in other items of equipment in the HVDC station, apart from the converter
valves, are excluded from the scope of this standard.
This standard does not apply to converter valves for line-commutated converter HVDC
systems.

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61643-31:2019(Main)
Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations
SIST EN 61643-31:2019

IEC 61643-31:2018 is applicable to Surge Protective Devices (SPDs), intended for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are designed to be connected to the DC side of photovoltaic installations rated up to 1 500 V DC. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents. Performance characteristics, safety requirements, standard methods for testing and ratings are established. SPDs complying with this standard are exclusively dedicated to be installed on the DC side of photovoltaic generators and the DC side of inverters. SPDs for PV systems with energy storage (e.g. batteries, capacitor banks) are not covered. SPDs with separate input and output terminals that contain specific series impedance between these terminal(s) (so called two-port SPDs according to IEC 61643-11:2011) are not covered. SPDs compliant with this standard are designed to be permanently connected where connection and disconnection of fixed SPDs can only be done using a tool. This standard does not apply to portable SPDs Keywords: photovoltaic installations, lightning or other transient overvoltages

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62747:2014/A1:2019(Amendment)
Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems
SIST EN 62747:2014/A1:2019

This International Standard defines terms for the subject of self-commutated voltage-sourced converters used for transmission of power by high voltage direct current (HVDC). The standard is written mainly for the case of application of insulated gate bipolar transistors (IGBTs) in voltage sourced converters (VSC) but may also be used for guidance in the event that other types of semiconductor devices which can both be turned on and turned off by control action are used. Line-commutated and current-sourced converters for high-voltage direct current (HVDC) power transmission systems are specifically excluded from this standard.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62751-1:2014/A1:2018(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
SIST EN 62751-1:2014/A1:2018
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62501:2009/A2:2017(Amendment)
Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
SIST EN 62501:2009/A2:2018
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day