EN 60146-1-3:1993
(Main)Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors
Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors
Specifies characteristics wherein convertor transformers differ from ordinary power transformers. In all other respects, the rules specified in HD 398.1 shall apply.
Halbleiter-Stromrichter - Allgemeine Anforderungen und netzgeführte Stromrichter - Teil 1-3: Transformatoren und Drosselspulen
Convertisseurs à semiconducteurs - Spécifications communes et convertisseurs commutés par le réseau - Partie 1-3: Transformateurs et bobines d'inductance
Spécifie les caractéristiques des transformateurs pour convertisseurs qui diffèrent de celles des transformateurs de puissance ordinaires. Dans tous les autres cas, les règles données dans la HD 398.1 s'appliquent.
Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors (IEC 60146-1-3:1991)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60146-1-3:2001
01-junij-2001
Semiconductor convertors - General requirements and line commutated
convertors - Part 1-3: Transformers and reactors (IEC 60146-1-3:1991)
Semiconductor convertors - General requirements and line commutated convertors --
Part 1-3: Transformers and reactors
Halbleiter-Stromrichter - Allgemeine Anforderungen und netzgeführte Stromrichter -- Teil
1-3: Transformatoren und Drosselspulen
Convertisseurs à semiconducteurs - Spécifications communes et convertisseurs
commutés par le réseau -- Partie 1-3: Transformateurs et bobines d'inductance
Ta slovenski standard je istoveten z: EN 60146-1-3:1993
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN 60146-1-3:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60146-1-3:2001
---------------------- Page: 2 ----------------------
SIST EN 60146-1-3:2001
---------------------- Page: 3 ----------------------
SIST EN 60146-1-3:2001
---------------------- Page: 4 ----------------------
SIST EN 60146-1-3:2001
---------------------- Page: 5 ----------------------
SIST EN 60146-1-3:2001
---------------------- Page: 6 ----------------------
SIST EN 60146-1-3:2001
CEI
NORME
IEC
INTERNATIONALE
146
-1-3
INTERNATIONAL
Troisième édition
STANDARD
Third edition
1991-03
Convertisseurs à semiconducteurs
Spécifications communes et
convertisseurs commutés par le réseau
Partie 1-3:
Transformateurs et bobines d'inductance
Semiconductor convertors
General requirements and
line commutated convertors
Part 1-3:
Transformers and reactors
© CEI 1991 Droits de reproduction
réservés— Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this pubflcation may be reproduced or utilized In
utilisée sous quelque forme quo ce soit et par aucun pro-
any form or by any means, electronic or mechanical.
cédé. électronique ou mécanique, y compris la photocopie et
including photocopying and microfilm, without permission
les microfilms, sans l'accord écrit de l'éditeur.
in writing from the publisher.
Bureau Centr
al de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
CODE PRIX
Commission Electrotechnique Internationale
International Electrotechnical Commission PRICE CODE
IEC
Meauwitapozataa 3nearpoTexHHVecnan
KOMHCCHR
Pour prix, voir catalogue on vigueur
For price, see current catalogue
---------------------- Page: 7 ----------------------
SIST EN 60146-1-3:2001
146- 1 -3 © IEC - 3 -
CONTENTS
Page
5
FOREWORD
Clause
1 Scope 7
2 Normative references 7
9
3 Rated values for convertor transformers
9
3.1 Rated current values
9
3.2 Temperature limits of cooling media
11
4 Losses and voltage drops in transformers and reactors
11
4.1 Losses in the transformer windings
4.2 Losses in interphase transformers, current balancing reactors, ser-
ies-smoothing reactors, transductors and other current regulating acces-
11 sories
13
4.3 Voltage drops in transformers and reactors
13
5 Tests for convertor transformers
5.1 Measurement of commutating reactance and determination of inductive
13
voltage drop (type test)
5.2 Short-circuit test (type test and routine test) 15
17
5.3 Temperature rise test (type test)
25
Annex A (normative)
Corrections to be applied when cooling medium temperature is higher than
25
standard
Tables
19
1 - Temperature rise limits
2 - Connections and calculation factors 21
---------------------- Page: 8 ----------------------
SIST EN 60146-1-3:2001
146-1-3 © IEC - 5 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
SEMICONDUCTOR CONVERTORS
General requirements and line commutated convertors
1-3: Transformers and reactors
Part
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on which all
1)
the National Committees having special interest therein are represented, express, as nearly as possible, an interna-
tional consensus of opinion on the subject dealt with.
They have the form of recommendations for international use and they are accepted by the National Committees in
2)
that sense.
In order to promote international unification, the IEC expresses the wish that all National Committees should adopt the
3)
text of the IEC recommendation for their national rules in so far as national conditions will permit. Any divergence
between the IEC recommendation and the corresponding national rules should, as far as possible, be clearly indicated
in the latter.
This standard has been prepared by Sub-Committee 22B: Semiconductor Convertors, IEC
Technical Committee No. 22: Power Electronics.
The text of this standard is based upon the following documents:
Two Months' Procedure Report on the Voting
Six Months' Rule Report on the Voting
22B(CO)17 22B(CO)19 22B(CO)22 22B(CO)23,23A
Full information
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.