EN 61119-6:1994
(Main)Digital audio tape cassette system (DAT) - Part 6: Serial copy management system
Digital audio tape cassette system (DAT) - Part 6: Serial copy management system
Applies to the Digital Audio Tape (DAT) cassette system for consumer applications. States the requirements for the recording function with digital audio interface signals and for digital output signals on DAT recorders.
Digitales Tonband-Kassetten-System - Teil 6: System für serielles Kopieren
Système audionumérique à cassette (DAT) - Partie 6: Système de gestion des copies consécutives
S'applique au système audionumérique à cassette (DAT) à usage grand public. Définit les exigences pour les fonctions d'enregistrement avec l'interface audionumérique ainsi que pour les signaux numériques de sortie des magnétophones audionumériques (DAT).
Digital audio tape cassette system (DAT) -- Part 6: Serial copy management system (IEC 61119-6:1992)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1999
Digital audio tape cassette system (DAT) -- Part 6: Serial copy management
system (IEC 61119-6:1992)
Digital audio tape cassette system (DAT) -- Part 6: Serial copy management system
Digitales Tonband-Kassetten-System -- Teil 6: System für serielles Kopieren
Système audionumérique à cassette (DAT) -- Partie 6: Système de gestion des copies
consécutives
Ta slovenski standard je istoveten z: EN 61119-6:1994
ICS:
33.160.30 Avdio sistemi Audio systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
NORME CEI
INTERNATIONALE I EC
19-6
INTERNATIONAL
Première édition
STANDARD
First edition
1992-06
Système audionumérique à cassette (DAT)
Partie 6:
Système de gestion des copies consécutives
Digital audio tape cassette system (DAT)
Part 6:
Serial copy management system
© CEI 1992 Droits de reproduction réservés — Copyright — all rights reserved
Aucune partie de
cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée
sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Internationale 3, rue de Varembé
Genève Suisse
Commission Electrotechnique Internationale CODE PRIX
G
International Electrotechnical Commission PRICE CODE
IEC
MexlayHaponHaa 3neirrpoTexHH4ecrian
HOMHCCHA
Pour prix,
^ voir catalogue en vigueur •
For price, see current catalogue
1119-6©IEC – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
DIGITAL AUDIO TAPE CASSETTE SYSTEM (DAT)
Part 6: Serial copy management system
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
1)
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
2) They have the form of recommendations for international use and they are accepted by the National
Committees in that sense.
In order to promote international unification, the IEC expresses the wish that all National Committees
3)
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
far as possible, be clearly indicated in the latter.
This part of International Standard IEC 1119 has been prepared by Sub-Committee 60A:
Sound recording, of IEC Technical Committee No. 60: Recording.
The text of this part is based on the following documents:
DIS Report on Voting
60A(CO)136 60A(CO)144
Full information on the voting for the approval of this part can be found in the Voting
Report indicated in the above table.
Annex A forms a integral part of this part of IEC 1119.
-5-
111 9-6 © IEC
AUDIO TAPE CASSETTE SYSTEM (DAT)
DIGITAL
Part 6: Serial copy management system
1 Scope
This part of IEC 1119 is applicable to the Digital Audio Tape (DAT) cassette system for
consumer applications. It states the requirements for the recording function with digital
ace signals and for digital output signals on DAT recorders.
audio inte rf
2 Normative references
The following normative documents contain provisions which, through reference in this
text, constitute provisions of this part of IEC 1119. At the time of publication, the editions
indicated were valid. All normative documents are subject to revision, and parties to
agreements based on this part of IEC 1119 are encouraged to investigate the possibility of
applying the most recent editions of the normative documents indicated below. Members
of IEC and ISO maintain registers of currently valid International Standards.
IEC 958: 1989, Digital audio interface.
Amendment 1 (in preparation).
Digital audio tape cassette system (DAT) - Part 1: Dimensions and
IEC 1119-1: 1992,
characteristics.
Digital audio tape cassette system (DAT) - Part 2: DAT calibration tape.
IEC 1119-2: 1991,
Digital audio tape cassette system (DAT) - Part 3: DAT tape properties.
IEC 1119-3: 1992,
Digital audio tape cassette system (DAT) - Part 5: DAT for profes-
IEC 1119-5: 199X,
sional use (in preparation).
3 Technical requirements
3.1 Digital output signals
3.1.1 Category code
The recorder shall provide the category code in the channel status bits of the digital output
signal. The category code shall be applied in the digital output signal as follows, in
accordance with the status of sub-code ID6 in the main ID of the main data area.
"DAT" (11000000)
When ID6 is "00" or "10"
When ID6 is "11" "DAT-P" (11000001)
1119-6©IEC - 7 -
3.1.2 Copyright status bit
The recorder shall provide t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.