IEC 60320-1:1994

Appliance couplers for household and similar general purposes - Part 1: General requirements

Applicable to two-pole appliance couplers for a.c. only, with and without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A.

Connecteurs pour usages domestiques et usages généraux analogues - Partie 1: Prescriptions générales

Applicable aux connecteurs bipolaires pour courant alternatif seulement, avec et sans contact de terre, de tension assignée ne dépassant pas 250 V et de courant assigné ne dépassant pas 16 A.

Izražanje lastnosti impulznih generatorjev

General Information

• Status: Published
• Publication Date: 15-Jun-1994
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 29.120.30 - Plugs, socket-outlets, couplers
• Technical Committee: SC 23G - Appliance couplers
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 29-Jun-2001
• Ref Project: SIST IEC 60624:2005 - Expression of the performance of pulse generators

Standards Content (Sample)

SLOVENSKI STANDARD
SIST IEC 60624:2005
01-junij-2005
Izražanje lastnosti impulznih generatorjev
Expression of the performance of pulse generators
Expression des qualités de fonctionnement des générateurs d'impulsions
Ta slovenski standard je istoveten z: IEC 60624
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
29.160.20 Generatorji Generators
SIST IEC 60624:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC 60624:2005

---------------------- Page: 2 ----------------------

SIST IEC 60624:2005
NORME CEI
INTERNATIONALE IEC
60624
INTERNATIONAL
Première édition
STANDARD
First edition
1978-01
Expression des qualités de fonctionnement
des générateurs d'impulsions
Expression of the performance of pulse generators
© IEC 1978 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
U
PRICE CODE
International Electrotechnical Commission
IEC Me ayHapoAHaH 3neHTpolexHH4ecHaR HOMHCCHA
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue

---------------------- Page: 3 ----------------------

SIST IEC 60624:2005
– 3 –
CONTENTS
Page
FOREWORD 7
PREFACE 7
SECTION ONE — GENERAL
Clause
11
1. Scope
11
2. Object
SECTION TWO — DEFINITIONS
11
3. Definition of pulse terms
11
4. Pulse measurement and analysis
13
5. Pulse generator terms
15
Terms related to the performance of generators 6.
17
transport and storage 7. Terms related to the conditions of testing operation,
19
8. Limits of error
21
9. Technical terms
SECTION THREE — CATEGORIES OF PERFORMANCE CHARACTERISTICS
35
10. Frequency category
35 11. Temporal category
Voltage (current) category 37
12.
39
Power category 13.
39
14. Impedance (admittance) category
39
15. State category
41
Dimensionless category 16.
SECTION FOUR — TYPES OF CONTROL OF PERFORMANCE CHARACTERISTICS
43
17. Control in General
43
18. Specific types of control
45
19. Multiple-controlled quantity
45
Dual-controlled quantity 20.
SECTION FIVE — STATEMENT OF PERFORMANCE
47
Values and limits of error 21.
47
Required statements (described in this standard) 22.
47 23. Optional statements (described in this standard)
47
Optional statements (not described in this standard) 24.
47
Specification of characteristic quantities 25.
51
26. Specification of multiple-controlled quantities
51
Specification of dual-controlled quantities 27.
51
Form of the specification of influence error 28.

---------------------- Page: 4 ----------------------

SIST IEC 60624:2005
— 5 --
SECTION SIX — GENERAL CONDITIONS FOR TESTING
Page
53
29. Test equipment
30. Period for achievement of stable operation 53
55
31. Performance of preliminary adjustments
55
32. Connected load
Output value 55
33.
34. Control of influence quantities 55
55
35. Testing
SECTION SEVEN — SPECIFIC CONDITIONS FOR TESTING
55
36. Test conditions applicable to operating error
37. Test conditions applicable to intrinsic error 57
38. Test conditions applicable to influence error 57
39. Test conditions applicable to stability error 59
59
40. Test conditions applicable to variation

---------------------- Page: 5 ----------------------

SIST IEC 60624:2005
— 7 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
EXPRESSION OF THE PERFORMANCE
OF PULSE GENERATORS
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on which all the
1)
National Committees having a special interest therein are represented, express, as nearly as possible, an international
consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National Committees in that
2)
sense.
In order to promote international unification, the IEC expresses the wish that all National Committees should adopt the
3)
text of the IEC recommendation for their national rules in so far as national conditions will permit. Any divergence between
the IEC recommendation and the corresponding national rules should, as far as possible, be clearly indicated in the latter.
PREFACE
This standard has been prepared by Sub-Committee 66A, Generators,
...