Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of conveyor belt vehicles when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This European Standard applies to
a)   self-propelled conveyor belt vehicles with or without driver's accommodation,
b)   self-propelled conveyor belt vehicles equipped with a van body,
c)   towed conveyor belt vehicles,
intended to be used for manual loading/unloading of aircraft.
This European Standard does not apply to any extensions or appurtenances of conveyor belt vehicles entering the aircraft cargo compartment in order to facilitate loading and unloading therein ("Aircraft Bulk Loading Systems", ABLS).
This European Standard does not apply to pneumatic systems and to cable-less remote controls.
This part of EN 12312 is not applicable to conveyor belt vehicles which were manufactured before the date of publication of this European Standard by CEN.
This part of EN 12312 when used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 provides the requirements for conveyor belt vehicles.

Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 3: Förderbandwagen

Matériel au sol pour aéronefs - Exigences particulières - Partie 3 : Convoyeurs à bande

Podporna oprema na tleh za letalski promet - Posebne zahteve - 3. del: Tračni transporterji - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
30-Jun-2019
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
13-Aug-2020
Due Date
18-Aug-2020
Completion Date
13-Aug-2020

Relations

Buy Standard

Draft
EN 12312-3:2017/oprA1:2019
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12312-3:2017/oprA1:2019
01-junij-2019
Podporna oprema na tleh za letalski promet - Posebne zahteve - 3. del: Tračni
transporterji - Dopolnilo A1
Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt
vehicles
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 3: Förderbandwagen
Matériel au sol pour aéronefs - Exigences particulières - Partie 3 : Convoyeurs à bande
Ta slovenski standard je istoveten z: EN 12312-3:2017/prA1
ICS:
49.100 Oprema za servis in Ground service and
vzdrževanje na tleh maintenance equipment
53.040.10 Transporterji Conveyors
SIST EN 12312-3:2017/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12312-3:2017/oprA1:2019

---------------------- Page: 2 ----------------------

SIST EN 12312-3:2017/oprA1:2019


DRAFT
EUROPEAN STANDARD
EN 12312-3:2017
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
April 2019
ICS 49.100
English Version

Aircraft ground support equipment - Specific
requirements - Part 3: Conveyor belt vehicles
Matériel au sol pour aéronefs - Exigences particulières Luftfahrt-Bodengeräte - Besondere Anforderungen -
- Partie 3 : Convoyeurs à bande Teil 3: Förderbandwagen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 274.

This draft amendment A1, if approved, will modify the European Standard EN 12312-3:2017. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norwa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.