SIST EN 15611:2020/kFprA1:2022
(Amendment)Railway applications - Braking - Relay valves
Railway applications - Braking - Relay valves
This document is applicable to relay valves designated to control the brake cylinder pressure of compressed air brakes fitted to railway vehicles, in association with an air brake distributor valve or other control device. It covers one stage relay valves and relay valves adjusting the brake cylinder pressure in response to a change in vehicle speed or load that is either continuously variable or in two or more stages, i.e. empty – loaded.
Relay valves operating with other pressures, in particular the brake pipe pressure, are not included.
This document specifies the requirements for the design, manufacture and testing of relay valves.
Bahnanwendungen - Bremse - Relaisventile
Applications ferroviaires - Freinage - Relais pneumatiques
Železniške naprave - Zavore - Ventili za kontrolo tlaka - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15611:2020/oprA1:2021
01-september-2021
Železniške naprave - Zavore - Ventili za kontrolo tlaka - Dopolnilo A1
Railway applications - Braking - Relay valves
Bahnanwendungen - Bremse - Relaisventile
Applications ferroviaires - Freinage - Relais pneumatiques
Ta slovenski standard je istoveten z: EN 15611:2020/prA1
ICS:
23.060.99 Drugi ventili Other valves
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 15611:2020/oprA1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15611:2020/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN 15611:2020/oprA1:2021
DRAFT
EUROPEAN STANDARD
EN 15611:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2021
ICS 45.040
English Version
Railway applications - Braking - Relay valves
Applications ferroviaires - Freinage - Relais Bahnanwendungen - Bremse - Relaisventile
pneumatiques
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 15611:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15611:2020/prA1:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15611:2020/oprA1:2021
EN 15611:2020/prA1:2021 (E)
Contents Page
European foreword . 3
1 Modification to Clause 2, "Normative references" . 4
2 Modification to 5.2.10, "Sensitivity" . 4
3 Modification to 5.7, "Fire behaviour" . 4
4 Modification to 7.2.4.6.2, "Test sequence" . 4
5 Modification to 7.2.4.7.2, "Test sequence" . 4
6 Modification to 7.2.4.9.3, "Pass/fail criteria". 4
7 Modification to 7.2.4.14.2, "Test sequence" . 4
8 Modification to 7.2.4.14.3, "Pass/fail criteria" . 4
9 Modifications to Annex ZA (informative), "Relationship between this European Standard
and the essential requirements of Directive 2008/57/EC aimed to be covered" . 4
2
---------------------- Page: 4 ----------------------
SIST EN 15611:2020/oprA1:2021
EN 15611:2020/prA1:2021 (E)
European foreword
This document (EN 15611:2020/prA1:2021) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Ass
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.