SIST EN 14865-1:2010/kFprA1:2010
(Amendment)Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
This European Standard specifies a testing method and sets the acceptance criteria for the determining of the lubrication ability of lubricating greases intended for the lubrication of axlebox bearings. The lubricating ability, primarily related to the capability of lubricating greases to protect against wear, is determined in a roller bearing lubricant test rig. Wear of the rolling bearing rollers, the frictional behaviour and temperature during the test are used to discriminate between lubricating greases.
NOTE 1 The testing method is referred to in EN 12081.
The method described is carried out in order to test axlebox greases for ordinary-speed vehicles, with speeds up to 200 km/h, and for greases intended for high-speed vehicles, with speeds up to 300 km/h. The method is a discriminating process, and those greases that pass will be subject to more extensive performance tests.
NOTE 2 In EN 12082 a more extensive rig performance test is described in detail. This rig performance test will check the satisfactory function of the assembly of box housing, bearing, sealing and grease during a simulated journey.
For purpose of quality assurance and quality control, this test method is also used for batch testing of greases intended for use in axleboxes.
For light rail and tramway applications other standards or documents agreed between the customer and the supplier may be applied.
Bahnanwendungen - Schmierfette für Radsatzlager - Teil 1: Prüfung der Schmierfähigkeit
Applications ferroviaires - Graisses lubrifiantes pour boîtes d'essieux - Partie 1: Méthode d'essai d'aptitude à lubrifier
Železniške naprave - Maziva za ležaje kolesnih dvojic - 1. del: Preskusna metoda za ugotavljanje zmožnosti mazanja - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14865-1:2010/kFprA1:2010
01-junij-2010
Železniške naprave - Maziva za ležaje kolesnih dvojic - 1. del: Preskusna metoda
za ugotavljanje zmožnosti mazanja - Dopolnilo A1
Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to
lubricate
Bahnanwendungen - Schmierfette für Radsatzlager - Teil 1: Prüfung der
Schmierfähigkeit
Applications ferroviaires - Graisses lubrifiantes pour boîtes d'essieux - Partie 1: Méthode
d'essai d'aptitude à lubrifier
Ta slovenski standard je istoveten z: EN 14865-1:2009/FprA1
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
75.100 Maziva Lubricants, industrial oils and
related products
SIST EN 14865-1:2010/kFprA1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14865-1:2010/kFprA1:2010
---------------------- Page: 2 ----------------------
SIST EN 14865-1:2010/kFprA1:2010
EUROPEAN STANDARD
FINAL DRAFT
EN 14865-1:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2010
ICS 45.040; 75.100
English Version
Railway Applications - Axlebox lubricating greases - Part 1:
Method to test the ability to lubricate
Applications ferroviaires - Graisses lubrifiantes pour boîtes Bahnanwendungen - Schmierfette für Radsatzlager - Teil 1:
d'essieux - Partie 1: Méthode d'essai d'aptitude à lubrifier Prüfung der Schmierfähigkeit
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 14865-1:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14865-1:2009/FprA1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14865-1:2010/kFprA1:2010
EN 14865-1:2009/FprA1:2010 (E)
Contents Page
Foreword .3
1 Modification to the Foreword .4
2 Modification to Annex ZA, Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU Directive 2008/57/EC.5
2
---------------------- Page: 4 ----------------------
SIST EN 14865-1:2010/kFprA1:2010
EN 14865-1:2009/FprA1:2010 (E)
Foreword
This document (EN 14865-1:2009/FprA1:2010) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.