Aerospace series - Bushes, plain corrosion resisting steel with self-lubricating liner - Dimensions and loads

This European Standard specifies the characteristics of plain bushes in corrosion resisting steel with
self-lubricating liner and the design recommendation of shafts and housings.
The bushes are intended for operation within the temperature range of 55 °C to 163 °C and assembly
with an interference fit into fixed and moving aerospace parts.

Luft- und Raumfahrt - Buchsen ohne Flansch aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung - Maße und Belastungen

Série aérospatiale - Bagues cylindriques en acier résistant à la corrosion à garniture autolubrifiante - Dimensions et charges

Aeronavtika - Drsne puše, navadno korozijsko odporno jeklo s samomazalno oblogo - Mere in nosilnosti

Ta evropski standard določa lastnosti drsnih puš iz korozijsko odpornega jekla s samomazalno oblogo ter priporočilo za projektiranje gredi in ohišij.
Puše so predvidene za uporabo v temperaturnem območju od 55 °C do 163 °C in sestavu z nateznim spojem v fiksnih in gibljivih delih aeronavtičnih vozil.

General Information

Status
Withdrawn
Publication Date
19-Sep-2017
Withdrawal Date
19-Sep-2022
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Sep-2022
Due Date
09-Oct-2022
Completion Date
20-Sep-2022

Relations

Buy Standard

Standard
EN 2287:2017
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2287:2017
01-november-2017
1DGRPHãþD
SIST EN 2287:2001
Aeronavtika - Drsne puše, navadno korozijsko odporno jeklo s samomazalno
oblogo - Mere in nosilnosti
Aerospace series - Bushes, plain corrosion resisting steel with self-lubricating liner -
Dimensions and loads
Luft- und Raumfahrt - Buchsen ohne Flansch aus korrosionsbeständigem Stahl mit
selbstschmierender Beschichtung - Maße und Belastungen
Série aérospatiale - Bagues cylindriques en acier résistant à la corrosion à garniture
autolubrifiante - Dimensions et charges
Ta slovenski standard je istoveten z: EN 2287:2017
ICS:
49.030.99 Drugi vezni elementi Other fasteners
SIST EN 2287:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2287:2017

---------------------- Page: 2 ----------------------

SIST EN 2287:2017


EN 2287
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2017
EUROPÄISCHE NORM
ICS 49.030.99 Supersedes EN 2287:1989
English Version

Aerospace series - Bush, plain, in corrosion resisting steel
with self-lubricating liner - Dimensions and loads
Série aérospatiale - Bagues cylindriques en acier Luft- und Raumfahrt - Buchse ohne Flansch aus
résistant à la corrosion à garniture autolubrifiante - korrosionsbeständigem Stahl mit selbstschmierender
Dimensions et charges Beschichtung - Maße und Belastungen
This European Standard was approved by CEN on 2 July 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2287:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2287:2017
EN 2287:2017 (E)
Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Required characteristics . 4
3.1 Configuration – Dimensions – Masses. 4
3.2 Surface roughness . 4
3.3 Materials . 4
4 Designation. 8
5 Marking . 8
6 Technical specification . 8
7 Design recommendation . 9

2

---------------------- Page: 4 ----------------------

SIST EN 2287:2017
EN 2287:2017 (E)
European foreword
This document (EN 2287:2017) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2287:1989.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 2287:2017
EN 2287:2017 (E)
1 Scope
This European Standard specifies the characteristics of plain bushes in corrosion resisting steel with
self-lubricating liner and the design recommendation of shafts and housings.
The bushes are intended for operation within the temperatur
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.