SIST EN 55013:2013
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
This International Standard applies to the generation of electromagnetic energy from sound and television receivers for the reception of broadcast and similar transmissions and from associated equipment. The frequency range covered extends from 9 kHz to 400 GHz. No measurements need be performed at frequencies where no limits are specified. Receiving systems for collective reception, in particular: - cable distribution head ends (Community Antenna Television, CATV); - community reception systems (Master Antenna Television, MATV) are covered by IEC 60728-2. Broadcast receivers for digital signals are covered by Annex A and Annex B. Information technology equipment (ITE) is excluded, even if intended to be connected to a television broadcast receiver. The telecommunication port of broadcast receivers, intended to be connected to a telecommunication network, is covered by CISPR 22. In addition, measurements at the telecommunication port are performed with the broadcast reception functions, which are independent from the telecommunication function, disabled during the measurement. PC tuner cards are measured according to the relevant clauses of this standard. This standard describes the methods of measurement applicable to sound and television receivers or associated equipment and specifies limits for the control of disturbance from such equipment. For multifunction equipment which is subjected simultaneously to different clauses of this standard and/or other standards, details are given in 4.1.
Ton- und Fernseh-Rundfunkempfänger und verwandte Geräte der Unterhaltungselektronik - Funkstöreigenschaften - Grenzwerte und Messverfahren
Récepteurs de radiodiffusion et de télévision et équipements associés - Caractéristiques des perturbations radioélectriques - Limites et méthodes de mesure
La CISPR 13:2009 s'applique à la génération d'énergie électromagnétique provenant des récepteurs de radiodiffusion et de télévision pour la réception des transmissions de radiodiffusion et similaires, et des équipements associés. La CISPR 13:2009 décrit les méthodes de mesure applicables aux récepteurs de radiodiffusion et de télévision ou aux équipements associés et spécifie les valeurs limites pour le contrôle des perturbations provenant de ces appareils. La gamme de fréquences considérées s'étend de 9 kHz à 400 GHz. Cette cinquième édition du CISPR 13 annule et remplace la quatrième édition publiée en 2001, son Amendement 1 (2003) et son Amendement 2 (2006). Cette édition constitue la présentation du détecteur quadratique moyen comme alternative au détecteur de quasi-crête et de valeur moyenne pour les mesures d'émission conduite et rayonnée.
Zvokovni in radiodifuzijski sprejemniki s pripadajočo opremo - Karakteristike občutljivosti za radijske motnje – Mejne vrednosti in merilne metode
Ta mednarodni standard se uporablja za proizvodnjo elektromagnetne energije iz zvočnih in televizijskih prejemnikov za sprejem oddajanih in podobnih prenosov ter iz povezane opreme. Zajet frekvenčni razpon je od 9 kHz do 400 GHz. Za frekvence, za katere ni določenih omejitev, ni treba opraviti meritev. Sistemi za sprejem za skupni sprejem, zlasti: – glavne sprejemne postaje kabelskih omrežij (Community Antenna Television, CATV); – sprejemni sistemi skupnosti (Master Antenna Television, MATV), so zajeti v standardu IEC 60728-2. Sprejemniki za digitalne signale so zajeti v prilogi A in prilogi B. Oprema informacijske tehnologije (ITE) je izključena, tudi če naj bi bila povezana s televizijskim sprejemnikom. Telekomunikacijska vrata sprejemnikov, ki so namenjena povezavi s telekomunikacijskim omrežjem, so zajeta v standardu CISPR 22. Poleg tega so merjenja pri telekomunikacijskih vratih izvedena s funkcijami sprejemanja oddajanja, ki so neodvisne od telekomunikacijske funkcije, onemogočene med merjenjem. Kartice sprejemnika za osebne računalnike se merijo v skladu z ustreznimi točkami tega standarda. Ta standard opisuje metode merjenja, ki se uporabljajo za zvočne in televizijske sprejemnike ali povezano opremo, ter določa omejitve za nadzor motenj, ki jih povzroči takšna oprema. Za multifunkcijsko opremo, ki hkrati spada pod različne točke tega standarda in/ali drugih standardov, so podrobnosti navedene pod točko 4.1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 55013:2013
01-september-2013
1DGRPHãþD
SIST EN 55013:2002
SIST EN 55013:2002/A1:2004
SIST EN 55013:2002/A2:2007
SIST EN 55013:2002/IS1:2009
=YRNRYQLLQUDGLRGLIX]LMVNLVSUHMHPQLNLVSULSDGDMRþRRSUHPR.DUDNWHULVWLNH
REþXWOMLYRVWL]DUDGLMVNHPRWQMH±0HMQHYUHGQRVWLLQPHULOQHPHWRGH
Sound and television broadcast receivers and associated equipment - Radio disturbance
characteristics - Limits and methods of measurement
Ton- und Fernseh-Rundfunkempfänger und verwandte Geräte der
Unterhaltungselektronik - Funkstöreigenschaften - Grenzwerte und Messverfahren
Récepteurs de radiodiffusion et de télévision et équipements associés - Caractéristiques
des perturbations radioélectriques - Limites et méthodes de mesure
Ta slovenski standard je istoveten z: EN 55013:2013
ICS:
33.100.99 Drugi vidiki v zvezi z EMC Other aspects related to
EMC
33.160.20 Radijski sprejemniki Radio receivers
SIST EN 55013:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 55013:2013
---------------------- Page: 2 ----------------------
SIST EN 55013:2013
EUROPEAN STANDARD
EN 55013
NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM
ICS 33.100.10 Supersedes EN 55013:2001 + A1:2003 + A2:2006, EN 55013:2001/IS1:2009
English version
Sound and television broadcast receivers and associated equipment -
Radio disturbance characteristics -
Limits and methods of measurement
(CISPR 13:2009, modified)
Récepteurs de radiodiffusion et de Ton- und Fernseh-Rundfunkempfänger
télévision et équipements associés - und verwandte Geräte der
Caractéristiques des perturbations Unterhaltungselektronik -
radioélectriques - Funkstöreigenschaften -
Limites et méthodes de mesure Grenzwerte und Messverfahren
(CISPR 13:2009, modifiée) (CISPR 13:2009, modifiziert)
This European Standard was approved by CENELEC on 2013-04-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 55013:2013 E
---------------------- Page: 3 ----------------------
SIST EN 55013:2013
EN 55013:2013 - 2 -
Foreword
The text of document CISPR/I/296/FDIS, future edition 5 of CISPR 13, prepared by CISPR SC I
"Electromagnetic compatibility of information technology equipment, multimedia equipment and
receivers" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 55013:2013.
A draft amendment, which covers common modifications to CISPR 13:2009, was prepared by
CLC/TC 210 "Electromagnetic Compatibility (EMC)" and approved by CENELEC.
The following dates are fixed:
• latest date by which this document has to be (dop) 2014-04-22
implemented at national level
by publication of an identical
national standard or by endorsement
(dow) 2016-04-22
• latest date by which the national
standards conflicting with this document
have to be withdrawn
This document supersedes EN 55013:2001 + IS1:2009 + A1:2003 + A2:2006.
EN 55013:2013 includes the following significant technical changes with respect to EN 55013:2001:
EN 55013:2013 constitutes the introduction of the RMS-average detector as an alternative to quasi-
peak and average detector for conducted and radiated emission measurements.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
---------------------- Page: 4 ----------------------
SIST EN 55013:2013
- 3 - EN 55013:2013
Endorsement notice
The text of the International Standard CISPR 13:2009 was approved by CENELEC as a European
Standard with agreed common modifications.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
CISPR 11:2003 + A1:2004 NOTE Harmonised as EN 55011:2007 (modified).
CISPR 16-2-1:2008 NOTE Harmonised as EN 55016-2-1:2009 (not modified).
CISPR 16-2-3:2006 NOTE Harmonised as EN 55016-2-3:2006 (not modified).
COMMON MODIFICATIONS
4.2 Disturbance Voltage at the mains terminals
st
Add the following new paragraph after the 1 sentence:
In addition to the RMS-average limit as specified in Table 1, a Peak limit with an increased value of
20 dB shall apply. Both RMS-average and Peak limits shall be met.
4.5 Disturbance power
st
Add the following new paragraph after the 1 sentence:
In addition to the RMS-average limit as specified in Table 4, a Peak limit with an increased value of
20 dB shall apply. Both RMS-average and Peak limits shall be met.
4.6 Radiated disturbance
Replace existing Table 5 in CISPR 13:2009 by the following new table:
---------------------- Page: 5 ----------------------
SIST EN 55013:2013
EN 55013:2013 - 4 -
Table 5 – Limits of radiated disturbances at 3 m distance
Limit Limit
Frequency
Equipment
Source dB(µV/m) dB(µV/m)
type
a a, b
MHz
Quasi-peak RMS-average
a a
Television Local oscillator ≤1 000
Fundamental 57 Fundamental 57
receivers, video
30 to 300
Harmonics 52 Harmonics 52
recorders and
300 to 1 000
Harmonics 56 Harmonics 56
PC tuner cards
c
Other 30 to 230
34/ 40
40
230 to 1 000
47 47
c
Television and Other 30 to 230 40 34/ 40
sound receivers
47
230 to 1 000 47
for broadcast
satellite
transmissions
(except outdoor
units),
Infrared remote
control units
and
Infrared
headphone
systems
Frequency Local oscillator Fundamental 60 Fundamental 60
≤1 000
modulation
30 to 300 Harmonics 52 Harmonics 52
sound receivers
Harmonics 56 Harmonics 56
300 to 1 000
and PC tuner
c
40 34/ 40
Other 30 to 230
cards
47 47
230 to 1 000
a
In Japan: 57 dB(µV/m) is relaxed to 66 dB(µV/m) for operating channels <300 MHz and to 70 dB(µV/m) for
operating channels >300 MHz.
b
The RMS-average limits can be applied as an alternative to quasi-peak limits.
c For narrowband disturbances 40 dB(µV/m) applies. For this application a narrowband disturbance is
identified if the difference between Peak and RMS-average value is ≤ 3 dB. All other signals are
considered as broadband disturbances. For these signals a Peak limit of 54 dB(µV/m) applies in addition
to the RMS-average limit of 34 dB(µV/m).
---------------------- Page: 6 ----------------------
SIST EN 55013:2013
- 5 - EN 55013:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
CISPR 16-1-1 2006 Specification for radio disturbance and EN 55016-1-1 2007
+ A1 2006 immunity measuring apparatus + A1 2007
+ A2 2007 and methods - + A2 2008
Part 1-1: Radio disturbance and immunity
measuring apparatus - Measuring apparatus
CISPR 16-1-2 2003 Specification for radio disturbance and EN 55016-1-2 2004
+ corr. January 2009 immunity measuring apparatus
+ A1 2004 and methods - + A1 2005
+ A2 2006 Part 1-2: Radio disturbance and immunity + A2 2006
measuring apparatus - Ancillary equipment -
Conducted disturbances
CISPR 16-1-3 2004 Specification for radio disturbance and EN 55016-1-3 2006
immunity measuring apparatus
and methods -
Part 1-3: Radio disturbance and immunity
measuring apparatus - Ancillary equipment -
Disturbance power
CISPR 16-1-4 2007 Specification for radio disturbance and EN 55016-1-4 2007
+ A1 2007 immunity measuring apparatus + A1 2008
+ A2 2008 and methods - + A2 2009
Part 1-4: Radio disturbance and immunity
measuring apparatus - Ancillary equipment -
Radiated disturbances
CISPR 16-2-2 2003 Specification for radio disturbance and EN 55016-2-2 2004
+ A1 2004 immunity measuring apparatus + A1 2005
+ A2 2005 and methods - + A2 2005
Part 2-2: Methods of measurement of
disturbances and immunity - Measurement
of disturbance power
CISPR 22 (mod) 2008 Information technology equipment - Radio EN 55022 2010
disturbance characteristics - Limits and + AC:2011 2011
methods of measurement
IEC 60050-161 1990 International Electrotechnical Vocabulary - -
+ A1 1997 (IEV) -
+ A2 1998 Chapter 161: Electromagnetic compatibility
IEC 60728-2 2002 Cabled distribution systems for television - -
and sound signals -
Part 2: Electromagnetic compatibility for
equipment
ITU-R BT.471-1 - Nomenclature and description of colour bar - -
signals
---------------------- Page: 7 ----------------------
SIST EN 55013:2013
EN 55013:2013 - 6 -
Annex ZZ
(informative)
Coverage of Essential Requirements of EU Directives
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers
protection requirements of Annex I Article 1(a) of the EU Directive 2004/108/EC.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directives concerned.
WARNING: Other requirements and other EU Directives may be applicable to the products falling
within the scope of this standard.
---------------------- Page: 8 ----------------------
SIST EN 55013:2013
CISPR 13
®
Edition 5.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
Sound and television broadcast receivers and associated equipment – Radio
disturbance characteristics – Limits and methods of measurement
Récepteurs de radiodiffusion et de télévision et équipements associés –
Caractéristiques des perturbations radioélectriques – Limites et méthodes de
mesure
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
X
CODE PRIX
ICS 33.100.10 ISBN 978-2-88910-005-7
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN 55013:2013
– 2 – CISPR 13 © IEC:2009
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope and object .8
2 Normative references.8
3 Terms, definitions and abbreviations .9
3.1 Terms and definitions .9
3.2 Abbreviations.10
4 Limits of disturbance.10
4.1 General .10
4.2 Disturbance voltage at the mains terminals .11
4.3 Disturbance voltage at the antenna terminals .12
4.4 Wanted signal and disturbance voltage at the RF output of equipment with
incorporated or with add-on RF video modulator.13
4.5 Disturbance power.13
4.6 Radiated disturbances .13
4.7 Radiated power .14
5 Measurement procedures .15
5.1 General .15
5.2 Test signals.15
5.3 Disturbance voltage at the mains terminals in the frequency range 150 kHz to
30 MHz.16
5.3.1 General .16
5.3.2 Television receivers .16
5.3.3 Sound receivers.17
5.3.4 Associated equipment.17
5.3.5 Audio amplifiers .18
5.3.6 Measurement of the disturbance voltage at the mains terminals .18
5.4 Measurement of disturbance voltage at the antenna terminals of a receiver
and associated equipment with an RF input in the frequency range 30 MHz to
2,15 GHz .18
5.4.1 General .18
5.4.2 Measurement on receivers or associated equipment with coaxial
antenna connections .19
5.4.3 Measurement on receivers or associated equipment with balanced
antenna connectors .19
5.4.4 Presentation of the results .19
5.5 Measurement of the wanted signal and disturbance voltage at the RF output
terminals of associated equipment with an RF video modulator, in the
frequency range 30 MHz to 2,15 GHz.20
5.5.1 General .20
5.5.2 Method of measurement .20
5.6 Measurement of disturbance power of associated equipment (video recorders
excluded) in the frequency range 30 MHz to 1 GHz .20
5.6.1 General .20
5.6.2 Method of measurement .20
5.6.3 Measuring procedure .21
5.6.4 Presentation of the results .21
5.7 Measurement of radiation in the frequency range 30 MHz to 1 GHz at 3 m
distance.21
---------------------- Page: 10 ----------------------
SIST EN 55013:2013
CISPR 13 © IEC:2009 – 3 –
5.7.1 General .21
5.7.2 Measuring site requirements .22
5.7.3 Disposition of the equipment under test.23
5.7.4 Disposition of the field-strength meter .24
5.7.5 Measurement procedure .24
5.8 Measurement of radiation in the frequency range 1 GHz to 18 GHz .24
5.8.1 Measuring set-up .24
5.8.2 Test site validation.25
5.8.3 Measuring procedure .26
5.8.4 Presentation of the results .26
5.9 Measurement of the local oscillator power at the input terminal of the outdoor
unit.26
6 Interpretation of CISPR radio disturbance limits .26
6.1 Compliance with this standard .26
6.2 Significance of a CISPR limit .26
6.3 Compliance with limits on a statistical basis .27
Annex A (normative) Broadcast receivers for digital signals .34
Annex B (informative) Specification of the wanted signal .38
Bibliography .43
Figure 1 – Colour bar signal levels according to ITU-R Recommendation BT 471-1 (see
5.2) (“red” signal) .28
Figure 2 – Teletext picture (see 5.2) .28
Figure 3 – Example of an artificial mains network 50 Ω-50 μH (see 5.3.1) .29
Figure 4 – Example of artificial mains network 50 Ω-50 μH-5 Ω (see 5.3.1) .29
Figure 5 – Measurement of the radiofrequency disturbance voltage injected into the
mains (see 5.3.1) .30
Figure 6 – Measurement of the radiofrequency disturbance voltage injected into the
mains (top view) (see 5.3.1) .30
Figure 7 – Circuit arrangement for the measurement of disturbance voltages at the
coaxial antenna terminals (see 5.4.2) .31
Figure 8 – Circuit arrangement for receivers with balanced antenna connections (see
5.4.3) .31
Figure 9 – Circuit arrangement for the measurement of the wanted signal and
disturbance voltage at the RF output of video recorders (see 5.5.2) .31
Figure 10 – Circuit arrangement for the measurement of disturbance power of
associated equipment (video recorders excluded) (see 5.6.3) .32
Figure 11 – Measuring site (see 5.7.2).32
Figure 12 – Check of the site suitability (see 5.7.2).32
Figure 13 – Theoretical site attenuation curve for the range 80 MHz to 1 GHz (see
5.7.2) .33
Figure 14 – Open-field measurement at 3 m distance (see 5.7.3).33
Figure A.1 – Measurement of the radiofrequency disturbance voltage injected into the
mains in the frequency range 150 kHz to 30 MHz (side view) .36
Figure A.2 – Example of isolation transformer for 46 MHz to 1,5 GHz .36
Figure A.3 – Typical size of isolation transformer for 46 MHz to 1,5 GHz.37
Figure A.4 – Typical characteristic of insertion loss of isolation transformer for 46 MHz
to 1,5 GHz .37
---------------------- Page: 11 ----------------------
SIST EN 55013:2013
– 4 – CISPR 13 © IEC:2009
Table 1 – Limits of disturbance voltage at the mains terminals.11
Table 2 – Limits of disturbance voltage at the antenna terminals.12
Table 3 – Limits of the wanted signal and disturbance voltage at RF output terminals of
equipment with RF video modulator.13
Table 4 – Limits of disturbance power .13
Table 5 – Limits of radiated disturbances at 3 m distance .14
Table 6 – Limits of radiated power of tuner units of direct to home satellite receivers .14
Table 7 – Limits of radiated power of outdoor units of direct to home satellite receivers .15
---------------------- Page: 12 ----------------------
SIST EN 55013:2013
CISPR 13 © IEC:2009 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
__________
SOUND AND TELEVISION BROADCAST RECEIVERS
AND ASSOCIATED EQUIPMENT –
RADIO DISTURBANCE CHARACTERISTICS –
LIMITS AND METHODS OF MEASUREMENT
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard CISPR 13 has been prepared by CISPR subcommittee I:
Electromagnetic compatibility of information technology equipment, multimedia equipment and
receivers.
This fifth edition of CISPR 13 cancels and replaces the fourth edition published in 2001, its
Amendment 1 (2003) and Amendment 2 (2006).This edition constitutes the introduction of the
RMS-average detector as an alternative to quasi-peak and average detector for conducted and
radiated emission measurements.
The document CISPR/I/296/FDIS, circulated to the National Committees as Amendment 3, led
to the publication of the new edition.
---------------------- Page: 13 ----------------------
SIST EN 55013:2013
– 6 – CISPR 13 © IEC:2009
The text of this standard is based on the fourth edition, Amendment 1, Amendment 2 and the
following documents:
FDIS Report on voting
CISPR/I/296/FDIS CISPR/I/297/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 14 ----------------------
SIST EN 55013:2013
CISPR 13 © IEC:2009 – 7 –
INTRODUCTION
The CISPR recommends that the limits and methods of measurement of radio disturbance
characteristics of sound and television receivers contained in the latest edition of CISPR 13,
including amendments, be used, without regional or national addenda or modifications. The
requirements are considered sufficient to reach adequate emission levels to protect radio
broadcast and telecommunication services and to allow other apparatus to operate as intended
at a reasonable distance.
---------------------- Page: 15 ----------------------
SIST EN 55013:2013
– 8 – CISPR 13 © IEC:2009
SOUND AND TELEVISION BROADCAST RECEIVERS
AND ASSOCIATED EQUIPMENT –
RADIO DISTURBANCE CHARACTERISTICS –
LIMITS AND METHODS OF MEASUREMENT
1 Scope and object
This International Standard applies to the generation of electromagnetic energy from sound
and television receivers for the reception of broadcast and similar transmissions and from
assoc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.