Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa

This document specifies the requirements relating to:
Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944)
Softened and cold worked
Wire for forged fasteners
D ≤ 15 mm
1 100 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Legierung X6NiCrTiMnMoV26-15 (1.4944) - Weichgeglüht und kaltverfestigt - Draht zum Stauchen für Verbindungselemente - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa

Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Legierung X6NiCrTiMnMoV26-15 (1.4944)
Weichgeglüht und kaltverfestigt
Draht zum Stauchen für Verbindungselemente
D ≤ 15 mm
1 100 MPa ≤ Rm ≤ 1 300 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud X6NiCrTiMnMoV26-15 (1.4944) - Adouci et écroui - Fils pour éléments de fixation forgés - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud X6NiCrTiMnMoV26-15 (1.4944)
Adouci et écroui
Fils pour éléments de fixation forgés
D ≤ 15 mm
1 100 MPa ≤ Rm ≤ 1 300 MPa
pour les applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina X6NiCrTiMnMoV26-15 (1.4944) - Popuščana in hladno obdelana - Žice za kovane vezne elemente - D ≤ 15 mm - 1100 MPa ≤ Rm ≤ 1300 MPa

Ta dokument določa zahteve, ki se navezujejo na:
toplotno odporno zlitino X6NiCrTiMnMoV26-15 (1.4944),
popuščano in hladno obdelano,
žice za kovane vezne elemente,
D ≤ 15 mm,
1100 MPa ≤ Rm ≤ 1300 MPa,
za uporabo v aeronavtiki.

General Information

Status
Published
Publication Date
22-Jan-2023
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Jan-2023
Due Date
11-Mar-2023
Completion Date
23-Jan-2023

Buy Standard

Standard
EN 3762:2023
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3762:2023
01-marec-2023
Aeronavtika - Toplotno odporna zlitina X6NiCrTiMnMoV26-15 (1.4944) - Popuščana
in hladno obdelana - Žice za kovane vezne elemente - D ≤ 15 mm - 1100 MPa ≤ Rm
≤ 1300 MPa
Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and
cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
Luft- und Raumfahrt - Hochwarmfeste Legierung X6NiCrTiMnMoV26-15 (1.4944) -
Weichgeglüht und kaltverfestigt - Draht zum Stauchen für Verbindungselemente - D ≤ 15
mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
Série aérospatiale - Alliage résistant à chaud X6NiCrTiMnMoV26-15 (1.4944) - Adouci et
écroui - Fils pour éléments de fixation forgés - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300
MPa
Ta slovenski standard je istoveten z: EN 3762:2022
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
SIST EN 3762:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3762:2023

---------------------- Page: 2 ----------------------
SIST EN 3762:2023


EN 3762
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2022
EUROPÄISCHE NORM
ICS 49.025.05
English Version

Aerospace series - Heat-resisting alloy
X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold
worked - Wire for forged fasteners - D ≤ 15 mm - 1 100
MPa ≤ R ≤ 1 300 MPa
m
Série aérospatiale - Alliage résistant à chaud Luft- und Raumfahrt - Hochwarmfeste Legierung
X6NiCrTiMnMoV26-15 (1.4944) - Adouci et écroui - X6NiCrTiMnMoV26-15 (1.4944) - Weichgeglüht und
Fils pour éléments de fixation forgés - D ≤ 15 mm - 1 kaltverfestigt - Draht zum Stauchen für
Verbindungselemente - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤
100 MPa ≤ Rm ≤ 1 300 MPa
1 300 MPa
This European Standard was approved by CEN on 24 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3762:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3762:2023
EN 3675:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Acceptance sampling plan . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 3762:2023
EN 3762:2022 (E)
European foreword
This document (EN 3762:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by month year June 2023, and conflicting national
standards shall be withdrawn
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.