Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005/A1:2012)

This International Standard specifies requirements and makes recommendations for the design, integration and validation of safety-related electrical, electronic and programmable electronic control systems (SRECS) for machines (see Notes 1 and 2). It is applicable to control systems used, either singly or in combination, to carry out safety-related control functions on machines that are not portable by hand while working, including a group of machines working together in a co-ordinated manner.

Sicherheit von Maschinen - Funktionale Sicherheit sicherheitsbezogener elektrischer, elektronischer und programmierbarer elektronischer Steuerungssysteme (IEC 62061:2005/A1:2012)

Sécurité des machines - Sécurité fonctionnelle des systèmes de commande électriques, électroniques et électroniques programmables relatifs à la sécurité (CEI 62061:2005/A1:2012)

Varnost strojev - Funkcijska varnost na varnost vezanih električnih, elektronskih in programirljivih elektronskih krmilnih sistemov (IEC 62061:2005/A1:2012)

Ta mednarodni standard določa zahteve in priporočila za izdelavo, vgradnjo in ovrednotenje na varnost vezanih električnih, elektronskih in programirljivih elektronskih krmilnih sistemov (SRECS) za stroje (glej opombi 1 in 2). Uporablja se za krmilne sisteme, ki se samostojno ali v kombinaciji uporabljajo za izvajanje na varnost vezanih krmilnih funkcij na strojih, ki jih med delom ni mogoče prenašati v roki, vključno s skupino strojev, ki delujejo skupaj na usklajen način.

General Information

Status
Withdrawn
Publication Date
17-Feb-2013
Withdrawal Date
05-Mar-2024
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Mar-2024
Due Date
28-Mar-2024
Completion Date
06-Mar-2024

Relations

Buy Standard

Amendment
EN 62061:2005/A1:2013
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62061:2005/A1:2013
01-april-2013
9DUQRVWVWURMHY)XQNFLMVNDYDUQRVWQDYDUQRVWYH]DQLKHOHNWULþQLKHOHNWURQVNLKLQ
SURJUDPLUOMLYLKHOHNWURQVNLKNUPLOQLKVLVWHPRY ,(&$
Safety of machinery - Functional safety of safety-related electrical, electronic and
programmable electronic control systems (IEC 62061:2005/A1:2012)
Sicherheit von Maschinen - Funktionale Sicherheit sicherheitsbezogener elektrischer,
elektronischer und programmierbarer elektronischer Steuerungssysteme (IEC
62061:2005/A1:2012)
Sécurité des machines - Sécurité fonctionnelle des systèmes de commande électriques,
électroniques et électroniques programmables relatifs à la sécurité (CEI
62061:2005/A1:2012)
Ta slovenski standard je istoveten z: EN 62061:2005/A1:2013
ICS:
13.110 Varnost strojev Safety of machinery
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 62061:2005/A1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62061:2005/A1:2013

---------------------- Page: 2 ----------------------

SIST EN 62061:2005/A1:2013

EUROPEAN STANDARD
EN 62061/A1

NORME EUROPÉENNE
February 2013
EUROPÄISCHE NORM

ICS 13.110; 25.040.99; 29.020


English version


Safety of machinery -
Functional safety of safety-related electrical, electronic and programmable
electronic control systems
(IEC 62061:2005/A1:2012)


Sécurité des machines -  Sicherheit von Maschinen -
Sécurité fonctionnelle des systèmes de Funktionale Sicherheit
commande électriques, électroniques et sicherheitsbezogener elektrischer,
électroniques programmables relatifs à la elektronischer und programmierbarer
sécurité elektronischer Steuerungssysteme
(CEI 62061:2005/A1:2012) (IEC 62061:2005/A1:2012)





This amendment A1 modifies the European Standard EN 62061:2005; it was approved by CENELEC on 2012-
12-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62061:2005/A1:2013 E

---------------------- Page: 3 ----------------------

SIST EN 62061:2005/A1:2013
EN 62061:2005/A1:2013 - 2 -

Foreword
The text of document 44/655/CDV, future edition 1 of IEC 62061:2005/A1, prepared by IEC TC 44 "Safety
of machinery - Electrotechnical aspects" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 62061:2005/A1:2013.

The following dates are fixed:
(dop) 2013-09-18
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-12-18

standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 62061:2005/A1:2012 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 62061:2005/A1:2013
- 3 - EN 62061:2005/A1:2013

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.