SIST EN 60952-3:2014

Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP)

This part of IEC 60952 defines requirements for the product specification as well as procedures for a Declaration of Design and Performance (DDP) for nickel-cadmium and lead-acid aircraft batteries containing vented or valve-regulated cells or monoblocs. The batteries are used for both general purposes and specific aerospace applications. The specific topics addressed in this part serve to establish acceptable quality standards required to qualify a battery as airworthy as defined in Clause 3 of IEC 60952-1:2013. The design construction and test requirements should conform to the requirements specified in IEC 60952-1 and IEC 60952-2. It is recognised that additional data may be required by other organisations (national standards bodies, AECMA, SAE etc.). The present standard can be used as a framework to devise tests for generation of the required data.

Flugzeugbatterien - Teil 3: Produktspezifikation und Erklärung zu Entwurf und Leistung (DDP)

Batteries d'aéronefs - Partie 3: Spécification de produit et déclaration de conception et de performance (DDP)

La CEI 60952-3:2013 définit les exigences concernant la spécification de produit ainsi que les procédures en vue d une déclaration de conception et de performance (DDP) pour les batteries d'aéronefs au nickel-cadmium et au plomb contenant des éléments ou monoblocs de type ouvert ou à soupape. Les batteries sont utilisées tant pour les usages généraux que pour des applications spécifiques aérospatiales. Les thèmes spécifiques abordés dans cette partie servent à établir des normes de qualité acceptable nécessaires pour qualifier une batterie de navigable, telle que définie à l'Article 3 de la CEI 60952-1:2013. Cette troisième édition annule et remplace la deuxième édition publiée en 2004. Cette nouvelle édition inclut les exigences pour définir la déclaration de performance et le détail d'une spécification entre le fournisseur et l'acheteur.

Letalske baterije - 3. del: Specifikacija za proizvod in pojasnilo k načrtovanju in delovanju (IEC 60952-3:2013)

Ta del standarda IEC 60952 določa zahteve za specifikacijo proizvoda ter pojasnilo k načrtovanju in delovanju za nikelj-kadmijeve in svinčeno-kislinske letalske baterije s celicami ali monobloki s prezračevanjem ali z ventilsko regulacijo. Baterije se uporabljajo za splošne namene in za posebno uporabo v aeronavtiki. Posebne teme iz tega dela se uporabljajo pri določitvi sprejemljivih standardov kakovosti, potrebnih za kvalifikacijo baterije kot plovne, kot je opredeljeno v točki 3 standarda IEC 60952-1:2013. Načrtovanje, konstrukcijske in preskusne zahteve naj bi bile skladne z zahtevami iz standardov IEC 60952-1 in IEC 60952-2. Priznava se, da lahko druge organizacije zahtevajo dodatne podatke (nacionalni organi za standarde, AECMA, SAE itd.). Ta standard se lahko uporablja kot okvir za pripravo preskusov za pridobivanje zahtevanih podatkov.

General Information

• Status: Published
• Publication Date: 05-Dec-2013
• ICS: 29.220.20 - Acid secondary cells and batteries
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ISCB - Secondary cells and batteries
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 25-Nov-2013
• Due Date: 30-Jan-2014
• Completion Date: 06-Dec-2013
• Ref Project: EN 60952-3:2013 - Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP)

Relations

• Replaces: SIST EN 60952-3:2005 - Aircraft batteries -- Part 3: Product specification and declaration of design and performance (DDP)
• Effective Date: 06-Dec-2011
• Revised: SIST EN 60952-3:2005 - Aircraft batteries -- Part 3: Product specification and declaration of design and performance (DDP)
• Effective Date: 06-May-2014
• Replaces: SIST EN 60952-3:2005 - Aircraft batteries -- Part 3: Product specification and declaration of design and performance (DDP)
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60952-3:2005 - Aircraft batteries -- Part 3: Product specification and declaration of design and performance (DDP)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60952-3:2014
01-januar-2014
1DGRPHãþD
SIST EN 60952-3:2005
/HWDOVNHEDWHULMHGHO6SHFLILNDFLMD]DSURL]YRGLQSRMDVQLORNQDþUWRYDQMXLQ
GHORYDQMX,(&
Aircraft batteries - Part 3: Product specification and declaration of design and
performance (DDP)
Flugzeugbatterien - Teil 3: Produktspezifikation und Erklärung zu Entwurf und Leistung
(DDP)
Batteries d'aéronefs - Partie 3: Spécification de produit et déclaration de conception et
de performance (DDP)
Ta slovenski standard je istoveten z: EN 60952-3:2013
ICS:
29.220.20 .LVOLQVNLVHNXQGDUQLþOHQLLQ Acid secondary cells and
EDWHULMH batteries
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 60952-3:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60952-3:2014

---------------------- Page: 2 ----------------------

SIST EN 60952-3:2014

EUROPEAN STANDARD
EN 60952-3

NORME EUROPÉENNE
October 2013
EUROPÄISCHE NORM

ICS 29.220.20; 49.060 Supersedes EN 60952-3:2004


English version


Aircraft batteries -
Part 3: Product specification and declaration of design and performance
(DDP)
(IEC 60952-3:2013)


Batteries d'aéronefs -  Flugzeugbatterien -
Partie 3: Spécification de produit et Teil 3: Produktspezifikation und Erklärung
déclaration de conception et de zu Entwurf und Leistung (DDP)
performance (DDP) (IEC 60952-3:2013)
(CEI 60952-3:2013)





This European Standard was approved by CENELEC on 2013-08-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60952-3:2013 E

---------------------- Page: 3 ----------------------

SIST EN 60952-3:2014
EN 60952-3:2013 - 2 -
Foreword
The text of document 21/805/FDIS, future edition 3 of IEC 60952-3, prepared by IEC/TC 21 "Secondary
cells and batteries" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60952-3:2013.
The following dates are fixed:
(dop) 2014-05-13
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-08-13
standards conflicting with the

document have to be withdrawn

This document supersedes EN 60952-3:2004.
EN 60952-3:2013 includes the following significant technical changes with respect to EN 60952-3:2004:
Requirements for defining the declaration of performance and specification details between supplier and
purchaser.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60952-3:2013 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60952-3:2014
- 3 - EN 60952-3:2013
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60952-1 2013 Aircraft batteries - EN 60952-1 2013
Part 1: General test requirements and
performance levels


IEC 60952-2 2013 Aircraft batteries - EN 60952-2 2013
Part 2: Design and construction requirements


ISO/TR 224 - Aircraft - Declaration of design and - -
performance for aircraft equipment -
Standard form

---------------------- Page: 5 ----------------------

SIST EN 60952-3:2014

---------------------- Page: 6 ----------------------

SIST EN 60952-3:2014



IEC 60952-3

®


Edition 3.0 2013-07




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Aircraft batteries –

Part 3: Product specification and declaration of design and performance (DDP)




Batteries d’aéronefs –

Partie 3: Spécification de produit et déclaration de conception et de performance

(DDP)















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX N


ICS 29.220.20; 49.060 ISBN 978-2-8322-0943-1



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60952-3:2014
– 2 – 60952-3 © IEC:2013
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Product specification . 6
4.1 General requirements . 6
4.2 Example product specification . 6
5 Declaration of design and performance (DDP) . 6
5.1 General . 6
5.2 Performance . 6
5.3 Limitations . 6
5.4 Departures from specification . 6
5.5 Verification . 7
5.6 Authentication . 7
5.7 Construction . 7
5.8 Definition . 7
Annex A (normative) Template for a typical purchaser’s product
specification/requirement . 8
Annex B (normative) Template for a typical declaration of design and performance . 11

---------------------- Page: 8 ----------------------

SIST EN 60952-3:2014
60952-3 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

AIRCRAFT BATTERIES –

Part 3: Product specification and declaration
of design and performance (DDP)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60952-3 has been prepared by IEC technical committee 21:
Secondary cells and batteries.
This third edition cancels and replaces the second edition published in 2004. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition: requirements for defining the declaration of performance and specification details
between supplier and purchaser.

---------------------- Page: 9 ----------------------

SIST EN 60952-3:2014
– 4 – 60952-3 © IEC:2013
The text of this standard is based on the following documents:
FDIS Report on voting
21/805/FDIS 21/816/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 60952 series, published under the general title Aircraft batteries
can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the
stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 60952-3:2014
60952-3 © IEC:2013 – 5 –
AIRCRAFT BATTERIES –

Part 3: Product specification and declaration
of design and performance (DDP)



1 Scope
This part of IEC 60952 defines requirements for the product specification as well as procedures
for a Declaration of Design and Performance (DDP) for nickel-cadmium and lead-acid aircraft
batteries containing vented or valve-regulated cells or monoblocs. The batteries are used for
both general purposes and specific aerospace applications.
The specific topics addressed in this part serve to establish acceptable quality standards
required to qualify a battery as airworthy as defined in Clause 3 of IEC 60952-1:2013.
The design construction and test requirements should conform to the requirements specified in
IEC 60952-1 and IEC 60952-2.
It is recognised that additional data may be required by other organisations (national standards
bodies, AECMA, SAE etc.). The present standard can be used as a framework to devise tests
for generation of the required data.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
IEC 60952-1:2013, Aircraft batteries – Part 1: General test requirements and performance
levels
IEC 60952-2:2013, Aircraft batteries – Part 2: Design and construction requirements
ISO/TR 224,
...