iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 9466:2024

(Main)

Railway Applications - Painting of passenger rail vehicles (ISO/DIS 9466:2023)

Railway Applications - Painting of passenger rail vehicles (ISO/DIS 9466:2023)

This document defines the performance requirements and acceptance criteria for paint used in the railway sector for passenger rail vehicles and their locomotives.
It also provides guidelines for the use of a paint applicator to describe its painting processes, product selection, surface preparation, coating application, verification and inspection methods, repairs, and tests to obtain the minimum performances for the final product.
This document applies to all types of paints used on:
- railway vehicle bodies;
- on-board equipment and constituent parts.

Bahnanwendungen - Lackierung von Schienenfahrzeugen für den Personenverkehr (ISO/DIS 9466:2023)

Applications ferroviaires - Peinturage des véhicules ferroviaires destinés au transport de passagers (ISO/DIS 9466:2023)

Železniške naprave - Barvanje železniških potniških vozil (ISO/DIS 9466:2023)

General Information

Status
Not Published
Public Enquiry End Date
29-Feb-2024
ICS
45.060.01 - Railway rolling stock in general
87.020 - Paint coating processes
Technical Committee
IŽNP - Reilway applications
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
21-Dec-2023
Due Date
09-May-2024
Ref Project
prEN ISO 9466 - Railway Applications - Painting of passenger rail vehicles (ISO/DIS 9466:2023)

Buy Standard

prEN ISO 9466:2024 - BARVEprEN ISO 9466:2024 - BARVE
PreviousNext
Draft
prEN ISO 9466:2024 - BARVE
English language
59 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 9466:2024
01-februar-2024
Železniške naprave - Barvanje železniških potniških vozil (ISO/DIS 9466:2023)
Railway Applications - Painting of passenger rail vehicles (ISO/DIS 9466:2023)
Bahnanwendungen - Lackierung von Schienenfahrzeugen für den Personenverkehr
(ISO/DIS 9466:2023)
Applications ferroviaires - Peinturage des véhicules ferroviaires destinés au transport de
passagers (ISO/DIS 9466:2023)
Ta slovenski standard je istoveten z: prEN ISO 9466
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
87.020 Postopki za nanašanje Paint coating processes
barvnih premazov
oSIST prEN ISO 9466:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 9466:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 9466:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 9466
ISO/TC 269/SC 2 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2023-12-15 2024-03-08
Railway Applications — Painting of passenger rail vehicles
Applications ferroviaires — Peinturage des véhicules ferroviaires à passagers
ICS: 45.060.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 9466:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 9466:2024
ISO/DIS 9466:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 9466
ISO/TC 269/SC 2 Secretariat: AFNOR
Voting begins on: Voting terminates on:

Railway Applications — Painting of passenger rail vehicles
Applications ferroviaires — Peinturage des véhicules ferroviaires à passagers
ICS: 45.060.01
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 9466:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 9466:2024
ISO/DIS 9466:2023(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 4
4 Painting systems, painting areas and environment and de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 4259-5:2024(Main)
Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property (ISO 4259-5:2023)
EN ISO 4259-5:2024

This document covers statistical methodology for assessing the expected agreement between two standard test methods that purport to measure the same property of a material, and deciding if a simple linear bias correction can further improve the expected agreement. It is intended for use with results collected from an interlaboratory study meeting the requirement of ISO 4259-1 or equivalent (for example, ASTM D6300). The interlaboratory study must be conducted on at least ten (10) materials that span the intersecting scopes of the test methods, and results must be obtained from at least six (6) laboratories using each method.
The statistical methodology is based on the premise that a bias correction will not be needed. In the absence of strong statistical evidence that a bias correction would result in better agreement between the two methods, a bias correction is not made. If a bias correction is required, then the parsimony principle is followed whereby a simple correction is to be favoured over a more complex one. Failure to adhere to the parsimony principle generally results in models that are over-fitted and do not perform well in practice.
The bias corrections of this practice are limited to a constant correction, proportional correction or a linear (proportional + constant) correction.
The bias-correction methods of this practice are method symmetric, in the sense that equivalent corrections are obtained regardless of which method is bias-corrected to match the other.
A methodology is presented for establishing the 95 % confidence limit (designated by this practice as the between methods reproducibility) for the difference between two results where each result is obtained by a different operator using different apparatus and each applying one of the two methods X and Y on identical material, where one of the methods has been appropriately bias-corrected in accordance with this practice.
This standard is intended for test methods which measure quantitative (numerical) properties of petroleum or petroleum products.
The statistical methodology outlined in this practice is also applicable for assessing the expected agreement between any two test methods that purport to measure the same property of a material, provided the results are obtained on the same comparison sample set, the standard error associated with each test result is known, and the sample set design meets the requirements of this practice, in particular that the statistical degree of freedom associated with all standard errors are 30 or greater

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18393-1:2024(Main)
Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling (ISO 18393-1:2023)
EN ISO 18393-1:2023

This document specifies a test method for the determination of settlement of blown loose-fill insulation applied in for ventilated attics.
This test method measures the ageing related to temperature and moisture cycling; However, there may be other factors, impact, seismic, vibration of any kind which may influence a change in thickness.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60143-4:2024(Main)
Series capacitors for power systems - Part 4: Thyristor controlled series capacitors (IEC 60143-4:2023)
EN IEC 60143-4:2024

IEC 60143-4:2023 specifies the testing of thyristor controlled series capacitor (TCSC) installations used in series with transmission lines. This document also addresses issues that consider ratings for TCSC thyristor valve assemblies, capacitors, and reactors as well as TCSC control characteristics, protective features, cooling system and system operation.
IEC 60143-4:2023 cancels and replaces the first edition published in 2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) thyristor valve testing requirements refer to IEC 62823;
b) Formula (1) in Subclause 4.2 has been corrected;
c) Hardware-in-the-loop (HIL) tests, Subclause 7.5.4, replaces previously specified real time protection and control system test with network simulator.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12643-3:2024(Main)
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO 12643-3:2023)
EN ISO 12643-3:2023

This standard provides safety requirements specific to binding and finishing equipment and systems. It is intended to be used in conjunction with the general requirements given in EN ISO 12643-1.
This standard provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process.
It is applicable to a wide range of equipment used in the binding and finishing process.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-35:2021/A1:2024(Amendment)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 60601-2-35:2020/AMD1:2023)
EN IEC 60601-2-35:2021/A1:2024
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 52016-3:2024(Main)
Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements (ISO 52016-3:2023)
EN ISO 52016-3:2023

Procedures enabling to take into account the effect of adaptive building envelope elements in the calculation of the energy needs for heating, cooling, internal temperatures and sensible and latent heat loads for buildings.
ISO 52016-1:2017 contains a normative Annex G that provides already a framework for such calculation procedures. The aim of this new proposed standard is to work out calculation procedures instead of only a framework for the calculation.
Adaptive building envelope elements are (usually: transparent) elements in the building envelope with thermal and/or solar and/or visual properties that vary in time, either passively or due to an active control.
The aim of adaptive building envelope elements is to improve the energy performance and/or comfort in the building under varying outdoor conditions (weather, season), indoor conditions (e.g. internal heat gains) and user needs.
Examples of adaptive building envelopes are products or assemblies with one or more of the following features:
• movable blinds,
• controllable vents,
• switchable glazing,
• movable thermally insulating shutters,
• PV integrated glazing (leading to variable total (thermal) solar energy transmittance),
• double skin facades.
The input data for the calculation are the thermal, solar and visual properties of the building element for the different states (e.g. from open to closed, from dark to light and combinations of these); and in case of gradually varying properties: for a number of representative discrete states.
In order to be able to use these properties for energy and internal temperature calculations, the details of the (passive or active) control protocol are needed as input as well.
The thermal, solar and visual properties of the building element are the thermal transmittance (Uvalue), air permeability (L-value) and solar transmittance (g-value). Or, where needed, the properties per component: e.g. thermal resistances and air permeability per component, solar absorptance and solar and visual transmittance per component. It is assumed that the existing standards on glazing
(ISO/TC 160/SC 2, CEN/TC 129) and on building elements (especially the EPB standards recently revised under ISO/TC 163/SC 2 and CEN/TC 89) enable to obtain these input data in most cases.
No ready-to-use international standards exist for the assumptions on the control protocol. EN 15232-1 (and ISO 52120-1 in preparation) provides some guidance.
The output of this standard should also be usable to compare products and assemblies. Due to the interactive nature of adaptive building envelope elements, this may require the use of specific reference buildings and occupant patterns (similar as for current international standards on energy performance rating of glazings and windows).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62343-2-1:2020/A1:2024(Amendment)
Dynamic modules - Part 2-1: Reliability qualification - Test template (IEC 62343-2-1:2019/AMD1:2023)
EN IEC 62343-2-1:2019/A1:2024
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62386-104:2019/A1:2024(Amendment)
Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components (IEC 62386-104:2019/AMD1:2023)
EN IEC 62386-104:2019/A1:2024
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS ETSI/TS 102 232-5 V3.19.1:2024(Main)
Lawful Interception (LI) - Handover Interface and Service-Specific Details (SSD) for IP delivery - Part 5: Service-specific details for IP Multimedia services
ETSI TS 102 232-5 V3.19.1 (2024-01)

RTS/LI-00248-5

  • Technical specification
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 9177-2:2024(Main)
Mechanical pencils for technical drawings - Part 2: Black leads - Classification and dimensions
ISO 9177-2:2022

This document specifies a classification and dimensions for black leads used for mechanical pencils for technical drawings.
Two types of black leads are available:
— polymer leads (designated by the letter “P”);
— ceramic leads (designated by the letter “C”).

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day