iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 17423:2024

(Main)

Intelligent transport systems - Application requirements and objectives (ISO/DIS 17423:2024)

Intelligent transport systems - Application requirements and objectives (ISO/DIS 17423:2024)

This document
— specifies communication service parameters presented by ITS station (ITS-S) application processes to the ITS-S management in support of automatic selection of ITS-S communication profiles in an ITS station unit (ITS-SU),
— specifies related procedures for the static and dynamic ITS-S communication profile selection processes at a high functional level,
— provides an illustration of objectives used to estimate an optimum ITS-S communication profile.

Intelligente Verkehrssysteme - Anwendungsanforderungen und Grundsätze (ISO/DIS 17423:2024)

Systèmes de transport intelligents - Exigences d'application et objectifs (ISO/DIS 17423:2024)

Le présent document
— spécifie les paramètres de service de communication présentés par les processus d'application de la station ITS (ITS-S) à la gestion ITS-S afin de faciliter la sélection automatique des profils de communication ITS-S au sein d'une unité de station ITS (ITS-SU),
— spécifie les procédures liées aux processus de sélection des profils de communication ITS-S statiques et dynamiques à un niveau fonctionnel élevé,
— fournit une illustration des objectifs permettant d'estimer un profil de communication ITS-S optimal.

Inteligentni transportni sistemi - Zahteve in cilji (ISO/DIS 17423:2024)

General Information

Status
Not Published
Public Enquiry End Date
17-Nov-2024
ICS
03.220.01 - Transport in general
03.220.20 - Road transport
35.240.60 - IT applications in transport
Technical Committee
ITC - Information technology
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
16-Sep-2024
Due Date
03-Feb-2025
Ref Project
prEN ISO 17423 - Intelligent transport systems - Application requirements and objectives (ISO/DIS 17423:2024)

Relations

Revises
SIST EN ISO 17423:2018 - Intelligent transport systems - Cooperative systems - Application requirements and objectives (ISO 17423:2018)
Effective Date
15-Nov-2023

Buy Standard

prEN ISO 17423:2024 - BARVEprEN ISO 17423:2024 - BARVE
PreviousNext
Draft
prEN ISO 17423:2024 - BARVE
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2024
Inteligentni transportni sistemi - Zahteve in cilji (ISO/DIS 17423:2024)
Intelligent transport systems - Application requirements and objectives (ISO/DIS
17423:2024)
Intelligente Verkehrssysteme - Anwendungsanforderungen und Grundsätze (ISO/DIS
17423:2024)
Systèmes de transport intelligents - Exigences d'application et objectifs (ISO/DIS
17423:2024)
Ta slovenski standard je istoveten z: prEN ISO 17423
ICS:
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 17423
ISO/TC 204
Intelligent transport systems —
Secretariat: ANSI
Application requirements and
Voting begins on:
objectives
2024-08-26
ICS: 35.240.60; 03.220.20
Voting terminates on:
2024-11-18
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 17423:2024(en)
DRAFT
ISO/DIS 17423:2024(en)
International
Standard
ISO/DIS 17423
ISO/TC 204
Intelligent transport systems —
Secretariat: ANSI
Application requirements and
Voting begins on:
objectives
ICS: 35.240.60; 03.220.20
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 17423:2024(en)
ii
ISO/DIS 17423:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms. 2
5 Communication service parameters . 3
5.1 Abstraction of application processes from communications.3
5.2 Communication service parameter classes .6
5.3 Operational CSPs .7
5.3.1 List of CSPs .7
5.3.2 Logical channel .7
5.3.3 Session continuity .7
5.3.4 Average ADU generation rate .7
5.3.5 Flow type.8
5.3.6 Maximum priority .8
5.3.7 Port number .8
5.3.8 Expected flow lifetime .8
5.4 Destination CSPs .8
5.4.1 List of CSPs .8
5.4.2 Destination type .9
5.4.3 Destination domain .9
5.4.4 Communication distance .9
5.4.5 Directivity .9
5.5 Performance CSPs .9
5.5.1 List of CSPs .9
5.5.2 Resilience .10
5.5.3 Minimum required throughput .10
5.5.4 Maximum allowed latency .10
5.5.5 Maximum ADU size .10
5.6 Security CSPs .11
5.6.1 List of CSPs .11
5.6.2 Need for data confidentiality .11
5.6.3 Need for data integrity.11
5.6.4 Need for non-repudiation .11
5.6.5 Need for source ITS-S application process authentication .11
5.7 Protocol CSP .11
5.7.1 List of CSPs .11
5.7.2 Communication protocol stack . 12
5.7.3 Specific communications protocols . 12
5.8 CSPs for sinks . 12
5.9 CSPs overview . 12
6 Policies and regulations .13
6.1 Cost policy.14
6.1.1 List of rules .14
6.1.2 Flat rate.14
6.1.3 Maximum rate per data unit .14
6.1.4 Maximum rate per connection time . 15
6.1.5 Maximum rate per connection . 15
6.2 Need for station anonymity . 15
6.3 Need for station location privacy .16
6.4 Support of station authentication .16

iii
ISO/DIS 17423:2024(en)
7 ITS-S procedures for ITS-S communication profile selection .16
7.1 Overview .16
7.2 Presentation of CSPs .16
7.3
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19085-6:2024(Main)
Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2024)
EN ISO 19085-6:2024

This document specifies the safety requirements and measures for single spindle vertical moulding machines (defined in 3.1), capable of continuous production use and hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a)       device to adjust the arbor vertically;
b)       device to tilt the arbor;
c)        device to fit a manually operated tenoning sliding table;
d)       glass bead saw unit;
e)       adjustable table insert;
f)         device for changing the direction of rotation of the spindle;
g)       device for fixing shank mounted tools on the arbor;
h)       interchangeable arbor;
i)         quick tool/arbor change system;
j)         demountable power feed unit;
k)       support for the demountable power feed unit with power-driven adjustments.
This document does not apply to
—     machines equipped with outboard bearings,
—     machines equipped with powered movements of a front extension table and/or a tenoning sliding table.
This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61786-1:2014/A1:2024(Amendment)
Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
EN 61786-1:2014/A1:2024
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 817:2024(Main)
Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications
EN 817:2024

This document specifies:
a)   the field of application for mechanical mixing valves for use in a supply system of Type 1 (see Figure 1);
b)   the dimensional, leak tightness, pressure resistance, hydraulic performance, mechanical strength, endurance, corrosion resistance of the surface of the product, sequence of testing and acoustic characteristics with which sanitary tapware products including their components (flexible hose, pull out spray) need to comply where applicable;
c)   test methods to verify the characteristics.
The tests described in this document are type tests (laboratory tests) and not quality control or factory production control (FPC) tests carried out during manufacture.
This document applies to draw-off taps (mechanical mixing valves) for use with sanitary appliances installed in rooms used for personal hygiene (cloakrooms, bathrooms, etc.) and for food preparation (kitchens), i.e. for use with baths, wash basins, bidets, showers and sinks.
Figure 1 shows a supply system of Type 1 with a pressure range of (0,05 to 1,0) Mpa [(0,5 to 10) bar].
The conditions of use and classifications are given in Table 1.
Table 1 - Conditions of use
Figure 1 - Supply system of Type 1 with a pressure range of (0,05 to 1,0) MPa [(0,5 to 10) bar]

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 60034-31:2024(Main)
Rotating electrical machines - Part 31: Selection of energye-fficient motors including variable speed applications - Application guidelines (IEC/TS 60034-31:2021)
CLC IEC/TS 60034-31:2024

IEC TS 60034-31:2021 provides a guideline of technical and economical aspects for the application of energy-efficient electric AC motors. It applies to motor manufacturers, OEMs (original equipment manufacturers), end users, regulators, legislators and other interested parties.
This document is applicable to all electrical machines covered by IEC 60034-1, IEC 60034-30 1 and IEC TS 60034-30-2.
a. references to relevant standards have been updated;
b. global market data for industrial motors have been updated.

  • Technical specification
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9241-115:2024(Main)
Ergonomics of human-system interaction - Part 115: Guidance on conceptual design, user-system interaction design, user interface design, and navigation design (ISO 9241-115:2024)
EN ISO 9241-115:2024

This document provides guidance on aspects of the design of human-system interaction, including conceptual design, user-system interaction design, user interface design and navigation design for interactive systems.
This document applies to all design and development approaches and methodologies, including human-centred design, object-oriented, waterfall, human factors integration (HFI), agile and rapid development.
It is intended for the following types of users:
—     user interface designers, who will apply the guidance during the development process;
—     developers, who will apply the guidance during the design and implementation of system functionality;
—     evaluators, who are responsible for ensuring that products meet the recommendations;
—     designers of user interface development tools and style guides to be used by user interface designers;
—     project managers, who are responsible for managing development processes.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16186-6:2024(Main)
Railway applications - Driver's cab - Part 6: Integration of displays, controls and indicators for tram vehicles
EN 16186-6:2024

This document is applicable to vehicles operating on tram networks.
This document gives design requirements and guidance in order to ensure visibility and operability of screens, controls and indicators in the cab in all operating conditions (day, night, natural or artificial lighting).
It covers four aspects:
-   the characteristics of the displays, controls and indicators in order to ensure proper visibility: i.e. range of luminance and contrast as well as the possibility of adjustment of perceived brightness;
-   the requirements for the location of the displays, keyboards, controls and indicators in the cab and on the driver’s desk: i.e. position, angle of visibility, etc. with consideration of the normal driving position and the working environment (windscreen, natural or artificial lighting in the cab, unwanted glare and reflections, etc.);
-   the characteristics and requirements for the location of microphones and loudspeakers;
-   design of symbols.
NOTE   All element numbers within the text refer to Table B.1.
This document does not apply to refurbishment of existing vehicles. This document is not intended to be applicable to driver's auxiliary desk, except for 5.3.10, Clauses 6, 8, 9 and Tables B.1, C.1.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61000-2-4:2024(Main)
Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances
EN IEC 61000-2-4:2024

IEC 61000-2-4:2024 is available as IEC 61000-2-4:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61000-2-4:2024 is related to conducted disturbances in the frequency range from 0 kHz to 150 kHz. It gives compatibility levels in differential mode (L-L and L-N) for industrial locations, with a nominal voltage up to 35 kV and a nominal frequency of 50 Hz or 60 Hz.
NOTE 1 Industrial locations are defined in 3.1.8.
Power distribution systems on ships, aircraft, offshore platforms and railways are not included.
NOTE 2 See also Annex E. The compatibility levels specified in this document apply at the in-plant point of coupling (IPC). The level of the low-frequency disturbances at the terminals of equipment receiving its supply from the IPC is generally assumed to be similar to the disturbance level at the IPC itself. However, in some situations this is not the case, particularly when a long feeder is dedicated to the supply of a particular load, or when a disturbance is generated or amplified within the installation of which the equipment forms a part.
Compatibility levels are specified for the types of low-frequency electromagnetic disturbances expected at any in-plant point of coupling (IPC) within industrial locations, for guidance in the definition of:
a) limits for disturbance emissions in industrial power distribution systems (including the planning levels defined in 3.1.5);
NOTE 3 A very wide range of conditions is possible in the electromagnetic environments of industrial networks. These are approximated in this document by the three classes described in Clause 4. However, it is the responsibility of the operator of such a network to take account of the particular electromagnetic and economic conditions, including equipment characteristics, in setting the above-mentioned limits.
b) immunity levels for the equipment within these systems.
The disturbance phenomena considered are:
- voltage deviations;
- voltage dips and short interruptions;
- voltage imbalance;
- power-frequency variations;
- harmonics up to order 40;
- interharmonics up to the 40th harmonic;
- voltage components above the 40th harmonic up to 150 kHz;
- DC component;
- transient overvoltages.
The compatibility levels are given for different classes of environment determined by the characteristics of the supply network and loads.
NOTE 4 Compatibility levels at the point of common coupling (PCC) on public networks are specified in IEC 61000‑2‑2 for low-voltage networks and IEC 61000‑2‑12 for medium-voltage networks. IEC TR 61000‑3‑6 and IEC TR 61000‑3‑7 describe the approach of power distribution system operators to the limitation of emissions from installations and large loads.
This third edition cancels and replaces the second edition published in 2002. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) introduction of new classes 2a, 2b and 2L (former class 2);
b) modification of existing compatibility levels for class 3;
c) addition of compatibility levels in the frequency range 2 kHz to 150 kHz;
d) addition of compatibility levels using a new quantity: partial weighted harmonic distortion (PWHD).

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 642:2024(Main)
Steel - Hardenability test by end quenching (Jominy test) (ISO 642:2024)
EN ISO 642:2024

This document specifies a method for determining the hardenability of steel by end quenching (Jominy test) by using a test piece 25 mm in diameter and at least 100 mm long.
By agreement and for a defined field of application, the test described in this document can be replaced by the calculation of the Jominy curve according to an accepted mathematical model.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13991:2024(Main)
Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods
EN 13991:2024

This European Standard gives the specifications and the test methods for creosotes for industrial wood preservation.
Different grades of creosote are used depending on the desired properties of the treated wood.
WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This standard cannot address all of the safety implications associated with its use. It is the responsibility of the user of this standard to establish appropriate health and safety practices and assess the applicability of regulatory limitations prior to use.  The warnings to use are covered in annex C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21420:2020/A1:2024(Amendment)
Protective gloves - General requirements and test methods - Amendment 1 (ISO 21420:2020/Amd 1:2022)
EN ISO 21420:2020/A1:2024
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day