oSIST prEN 1024:2017
(Main)Clay roofing tiles for discontinuous laying - Determination of geometric characteristics
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics
This European standard specifies the methods for determining the geometric characteristics of clay tiles as defined in EN 1304, Clay roofing tiles and fittings - Product definitions and specifications.
Tondachziegel für überlappende Verlegung - Bestimmung der geometrischen Kennwerte
Diese Europäische Norm legt die Prüfverfahren für die Bestimmung der geometrischen Kennwerte von Tondachziegeln fest, die in EN 1304, Dachziegel und Formziegel - Begriffe und Produktanforderungen definiert sind.
Tuiles de terre cuite pour pose en discontinu - Détermination des caractéristiques géométriques
La présente Norme européenne spécifie les méthodes de détermination des caractéristiques géométriques des tuiles en terre cuite telles que définies dans l'EN 1304, Tuiles et accessoires en terre cuite - Définitions et spécifications des produits.
Opečni strešniki - Ugotavljanje geometrijskih značilnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 1024:2017
01-september-2017
2SHþQLVWUHãQLNL8JRWDYOMDQMHJHRPHWULMVNLK]QDþLOQRVWL
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics
Tondachziegel für überlappende Verlegung - Bestimmung der geometrischen Kennwerte
Tuiles de terre cuite pour pose en discontinu - Détermination des caractéristiques
géométriques
Ta slovenski standard je istoveten z: prEN 1024
ICS:
91.060.20 Strehe Roofs
91.100.25 Gradbeni izdelki iz terakote Terracotta building products
oSIST prEN 1024:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1024:2017
---------------------- Page: 2 ----------------------
oSIST prEN 1024:2017
DRAFT
EUROPEAN STANDARD
prEN 1024
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2017
ICS 91.100.25 Will supersede EN 1024:2012
English Version
Clay roofing tiles for discontinuous laying - Determination
of geometric characteristics
Tuiles de terre cuite pour pose en discontinu - Tondachziegel für überlappende Verlegung -
Détermination des caractéristiques géométriques Bestimmung der geometrischen Kennwerte
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 128.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1024:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1024:2017
prEN 1024:2017 (E)
Contents Page
Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Symbols . 4
4 Test pieces . 5
5 Tests methods . 5
5.1 Determination of dimensional characteristics. 5
5.1.1 Individual dimensions . 5
1
5.1.2 Overlap dimensions (margins) . 6
5.2 Cambers . 8
5.2.1 Principle .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.