SIST EN 14511-1:2008
(Main)Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions
This part of EN 14511 specifies the terms and definitions for the rating and performance of air and water cooled air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with electrically driven compressors when used for space heating and/or cooling. This European Standard does not specifically apply to heat pumps for sanitary hot water, although certain definitions can be applied to these.
This European Standard applies to factory made units that can be ducted.
This standard applies to factory made liquid chilling packages with integral condensers or for use with remote condensers.
This standard applies to factory-made units of either fixed capacity or variable capacity by any means.
Packaged units, single split and multisplit systems are covered by this standard.,Single duct and double duct units are covered by the standard.
In the case of units consisting of several parts, this standard applies only to those designed and supplied as a complete package, except for liquid chilling packages with remote condenser.
This standard is primarily intended for water and brine chilling packages but can be used for other liquid subject to agreement.
This standard applies to air-to-air air conditioners which evaporate the condensate on the condenser side.
The units having their condenser cooled by air and by the evaporation of external additional water are not covered by this standard.
This standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant.
Installations used for heating and/or cooling of industrial processes are not within the scope of this standard.
NOTE 1 Part load testing of units is dealt with in CEN/TS 14825.
NOTE 2 All the symbols given in this text should be used regardless of the language used.
Luftkonditionierer, Flüssigkeitskühlsätze und Wärmepumpen mit elektrisch angetriebenen Verdichtern für die Raumbeheizung und Kühlung - Teil 1: Begriffe
Dieser Teil der EN 14511 legt die Begriffe für die Einstufung und Leistung von luft- und wassergekühlten Luft-konditionierern, Flüssigkeitskühlsätzen, Luft/Luft-, Wasser/Luft-, Luft/Wasser- und Wasser/Wasser-Wärme-pumpen mit elektrisch angetriebenen Verdichtern für die Raumheizung und/oder -kühlung fest. Diese Euro- päische Norm gilt nicht speziell für Wärmepumpen zum Erwärmen von Brauchwasser, obwohl bestimmte Definitionen für diese angewendet werden können. Diese Europäische Norm gilt für fabrikmäßig zusammengebaute Geräte, die mit Luftkanalanschlüssen ver-sehen sein können. Diese Norm gilt für fabrikmäßig zusammengebaute Flüssigkeitskühlsätze, die mit eingebauten Verflüssigern oder mit getrennt angeordneten Verflüssigern betrieben werden. Diese Norm gilt für fabrikmäßig zusammengebaute Geräte mit fest eingestellter oder durch beliebige Vorrich-tungen zu verändernder Leistung (variable Leistung). Kompaktgeräte, Einzelgeräte in Split-Bauweise und Multi-Split-Systeme fallen unter den Anwendungsbereich dieser Norm. Geräte mit Ein- und Zweikanal-Systemen werden ebenfalls in dieser Norm behandelt. Wenn die Geräte aus mehreren Teilen bestehen, gilt diese Norm mit der Ausnahme von Flüssigkeitskühl-sätzen mit getrennt angeordnetem Verflüssiger nur für die Teile, die als vollständige Baueinheit konstruiert und geliefert werden. Diese Norm gilt hauptsächlich für Wasser- und Solekühlsätze, kann jedoch bei Vereinbarung auf weitere Flüssigkeitskühlsätze angewendet werden. Diese Norm gilt für Luft/Luft-Luftkonditionierer, die das Kondensat auf der Verflüssigerseite verdampfen. Geräte, deren Verflüssiger durch Belüftung und durch Verdampfung von zusätzlichem, von außen zuge-führtem Wasser abgekühlt wird, werden in dieser Norm nicht behandelt. Diese Norm gilt nicht für Geräte, bei denen, z. B. mit CO2 als Kältemittel, der Kreisprozess transzyklisch be-trieben wird. Anlagen für die Beheizung und/oder Kühlung industrieller Prozesse fallen nicht in den Anwendungsbereich dieser Norm.
Climatiseurs, groupes refroidisseurs de liquide et pompes a chaleur avec compresseur entraîné par moteur électrique pour le chauffage et la réfrigération des locaux - Partie 1: Termes et définitions
La présente partie de l’EN 14511 spécifie les termes et définitions relatifs à la détermination des caractéristiques
de performance des climatiseurs à condensation par air et à condensation par eau, des groupes refroidisseurs de
liquide et des pompes à chaleur air/air, eau/air, air/eau et eau/eau, avec compresseur entraîné par moteur
électrique, lorsqu’ils sont utilisés pour le chauffage et/ou la réfrigération des locaux. La présente Norme
européenne ne s’applique pas spécifiquement aux pompes à chaleur utilisées pour l’eau chaude sanitaire, bien
que certaines définitions puissent leur être applicables.
La présente Norme européenne s’applique aux appareils fabriqués en usine qui peuvent être raccordés.
La présente norme s’applique aux groupes refroidisseurs de liquide autonomes fabriqués en usine ou conçus
pour être utilisés avec des condenseurs fournis séparément.
La présente norme s’applique aux appareils fabriqués en usine de capacité fixe ou variable par tous moyens.
La présente norme couvre les systèmes monoblocs, à deux éléments séparés et multi-split. Elle couvre
également les appareils à simple et à double raccordement.
Dans le cas d’appareils à éléments séparés, la présente norme ne s’applique qu’aux appareils conçus et fournis
comme un ensemble, sauf pour ce qui concerne les groupes refroidisseurs de liquide avec condenseur séparé.
La présente norme est principalement destinée aux groupes refroidisseurs d’eau et d’eau glycolée mais peut être
utilisée, après accord, pour d’autres liquides.
La présente norme s’applique aux climatiseurs air/air qui évaporent les condensats du côté du condenseur.
La présente norme ne couvre pas les appareils ayant leur condenseur refroidi par air et par évaporation d’eau
d’un circuit supplémentaire externe.
La présente norme ne couvre pas les appareils utilisant des cycles transcritiques, par exemple avec CO2
comme fluide frigorigène.
La présente norme ne s’applique pas aux installations utilisées pour le
Klimatske naprave, enote za tekočinsko hlajenje in toplotne črpalke z električnimi kompresorji za segrevanje in hlajenje prostora – 1. del: Pojmi in definicije
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luftkonditionierer, Flüssigkeitskühlsätze und Wärmepumpen mit elektrisch angetriebenen Verdichtern für die Raumbeheizung und Kühlung - Teil 1: BegriffeClimatiseurs, groupes refroidisseurs de liquide et pompes a chaleur avec compresseur entraîné par moteur électrique pour le chauffage et la réfrigération des locaux - Partie 1: Termes et définitionsAir conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions27.080Heat pumps91.140.30VLVWHPLVentilation and air-conditioning01.040.23Fluid systems and components for general use (Vocabularies)23.120QDSUDYHVentilators. Fans. Air-conditionersICS:Ta slovenski standard je istoveten z:EN 14511-1:2007SIST EN 14511-1:2008en,fr,de01-marec-2008SIST EN 14511-1:2008SLOVENSKI
STANDARDSIST EN 14511-1:20041DGRPHãþD
SIST EN 14511-1:2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14511-1November 2007ICS 23.120; 01.040.23Supersedes EN 14511-1:2004
English VersionAir conditioners, liquid chilling packages and heat pumps withelectrically driven compressors for space heating and cooling -Part 1: Terms and definitionsClimatiseurs, groupes refroidisseurs de liquide et pompes àchaleur avec compresseur entraîné par moteur électriquepour le chauffage et la réfrigération des locaux - Partie 1:Termes et définitionsLuftkonditionierer, Flüssigkeitskühlsätze undWärmepumpen mit elektrisch angetriebenen Verdichternfür die Raumbeheizung und Kühlung - Teil 1: BegriffeThis European Standard was approved by CEN on 13 October 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14511-1:2007: ESIST EN 14511-1:2008
EN 14511-1:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Terms and definitions.4 3 Classification.9 Index.11 Bibliography.13
SIST EN 14511-1:2008
EN 14511-1:2007 (E) 3 Foreword This document (EN 14511-1:2007) has been prepared by Technical Committee CEN/TC 113 “Heat pumps and air conditioning units”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the latest by May 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14511-1:2004. The revised standard takes into account double duct units and multisplit systems. EN 14511 comprises the following parts under the general title "Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling“: - Part 1: Terms and definitions - Part 2: Test conditions - Part 3: Test methods - Part 4: Requirements According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 14511-1:2008
EN 14511-1:2007 (E) 4 1 Scope This part of EN 14511 specifies the terms and definitions for the rating and performance of air and water cooled air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with electrically driven compressors when used for space heating and/or cooling. This European Standard does not specifically apply to heat pumps for sanitary hot water, although certain definitions can be applied to these. This European Standard applies to factory-made units that can be ducted. This standard applies to factory-made liquid chilling packages with integral condensers or for use with remote condensers. This standard applies to factory-made units of either fixed capacity or variable capacity by any means. Packaged units, single split and multisplit systems are covered by this standard. Single duct and double duct units are covered by the standard. In the case of units consisting of several parts, this standard applies only to those designed and supplied as a complete package, except for liquid chilling packages with remote condenser. This standard is primarily intended for water and brine chilling packages but can be used for other liquid subject to agreement. This standard applies to air-to-air air conditioners which evaporate the condensate on the condenser side. The units having their condenser cooled by air and by the evaporation of external additional water are not covered by this standard. This standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant. Installations used for heating and/or cooling of industrial processes are not within the scope of this standard. NOTE 1 Part load testing of units is dealt with in CEN/TS 14825. NOTE 2 All the symbols given in this text should be used regardless of the language used. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1
air conditioner encased assembly or assemblies designed as a unit to provide delivery of conditioned air to an enclosed space (room for instance) or zone. It includes an electrically operated refrigeration system for cooling and possibly dehumidifying the air. It can have means for heating, circulating, cleaning and humidifying the air. If the unit provides heating by reversing the refrigerating cycle then it is a heat pump 2.2 heat pump encased assembly or assemblies designed as a unit to provide delivery of heat. It includes an electrically operated refrigeration system for heating. It can have means for cooling, circulating, cleaning and dehumidifying the air. The cooling is by means of reversing the refrigerating cycle SIST EN 14511-1:2008
EN 14511-1:2007 (E) 5 2.3
comfort air conditioner or heat pump air conditioner or heat pump to satisfy the requirements of the occupants of the air conditioned room 2.4
close control air conditioner air conditioner to satisfy the requirements of the process carried out in the air conditioned room 2.5
control cabinet air conditioner air conditioner to satisfy the requirements of the control cabinet 2.6
packaged unit factory assembly of components of refrigeration system fixed on a common mounting to form a discrete unit 2.7
single split unit factory assembly of components of refrigeration system fixed on two mountings or more to form a discrete matched functional unit 2.8
single-duct air conditioner air conditioner for spot cooling in which the condenser intake air is introduced from the space containing the unit and discharged outside this space 2.9
double-duct air conditioner air conditioner placed in the conditioned space near a wall, in which the condenser intake air is introduced from the outdoor environment by a small duct and the condenser discharge air is rejected to the outdoor environment by a second small duct 2.10
liquid chilling package factory-made unit designed to cool liquid, using an evaporator, a refrigerant compressor, an integral or remote condenser and appropriate controls. It may have means for heating which can be reversing the refrigerating cycle, like a heat pump 2.11 heat recovery liquid chilling package factory-made liquid chilling package designed for the purpose of chilling liquid and recovering of heat 2.12
heat recovery recovery of heat rejected by the unit(s) whose primary control is in the cooling mode by means of either an additional heat exchanger (e.g. a liquid chiller with an additional condenser) or by transferring the heat through the refrigerating system for use to unit(s) whose primary control remains in the heating mode (e.g. variable refrigerant flow) 2.13
indoor heat exchanger heat exchanger which is designed to transfer heat to the indoor part of the building or to the indoor hot water supplies or to remove heat from these NOTE In the case of an air conditioner or heat pump operating in the cooling mode, this is the evaporator. In the case of an air conditioner or heat pump operating in the heating mode, this is the condenser.
SIST EN 14511-1:2008
EN 14511-1:2007 (E) 6 2.14
outdoor heat exchanger heat exchanger which is designed to remove heat from the outdoor ambient environment, or any other available heat source, or to transfer heat to it NOTE In the case of an air conditioner or heat pump operating in the cooling mode, this is the condenser. In the case of an air conditioner heat pump operating in the heating mode, this is the evaporator. 2.15
heat recovery heat exchanger heat exchanger assembly which is designed to transfer heat to the heat recovery medium 2.16
heat transfer medium any medium (water, air, .) used for the transfer of the heat without change of state EXAMPLES cooled liquid circulating in the evaporator; cooling medium circulating in the condenser; heat recovery medium circulating in the heat recovery heat exchanger. 2.17
outside air air from the outdoor environment entering the outdoor heat exchanger 2.18
exhaust air air from the air conditioned space entering the outdoor heat exchanger 2.19
recycled air air from the air conditioned space entering the indoor heat exchanger 2.20 outdoor air air from the outdoor environment entering the indoor heat exchanger 2.21
water loop
closed circuit of water maintained within a temperature range on which the units in cooling mode reject heat and the units in heating mode take heat 2.22
total cooling capacity PC heat given off from the heat transfer medium to the unit per unit of time, expressed in Watt
2.23 latent cooling capacity PL capacity of the unit for removing latent heat from the evaporator intake air, expressed in Watt 2.24
sensible cooling capacity PS capacity of the unit for removing sensible heat from the evaporator intake air, expressed in Watt 2.25
heating capacity PH heat given off by the unit to the heat transfer medium per unit of time, expressed in Watt SIST EN 14511-1:2008
EN 14511-1:2007 (E) 7 NOTE If heat is removed from the indoor heat exchanger for defrosting, it is taken into account. 2.26
heat rejection capacity heat removed by the heat transfer medium of the condenser per unit of time, expressed in Watt NOTE This applies only to heat recovery liquid chilling packages. 2.27
heat recovery capacity heat removed by the heat transfer medium of the heat recovery heat exchanger, per unit of time, expressed in Watt NOTE This applies only to heat recovery liquid chilling packages. 2.28
total power input PT power input of all components of the unit as delivered, expressed in Watt 2.29
effective power input PE average electrical power input of the unit within the defined interval of time obtained from: power input for operation of the compressor and any power input for defrosting; power input for all control and safety devices of the unit; and proportional power input of the conveying devices (e.g. fans, pumps) for ensuring the transport of the heat transfer media inside the unit. It is expressed in Watt 2.30 energy efficiency ratio EER ratio of the total cooling capacity to the effective power input of the unit, expressed in Watt/Watt 2.31
sensible heat ratio SHR ratio of the sensible cooling capacity to the total cooling capacity, expressed in Watt/Watt 2.32
coefficient of performance COP ratio of the heating capacity to the effective power input of the unit, expressed in Watt/Watt 2.33 operating range range indicated by the manufacturer and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.