SIST-TP CEN/TR 15500-2:2018

Energy Performance of Buildings - Control for heating, ventilating and air-conditioning applications - Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5

This Technical Report refers to prEN 15500-1, Control for heating, ventilating and air-conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5,M4-5,M5-5.
It contains information to support the correct understanding, use and national adaption of prEN 15500-1:2015.
This Technical Report does not contain any normative provision.

Begleitender TR zu EN 15500

Energijske lastnosti stavb - Naprave za regulacijo sistemov za ogrevanje, prezračevanje in klimatizacijo - 2. del: Razlaga in utemeljitev prEN 15500-1:2015 - Moduli M3-5, M4-5, M5-5

To tehnično poročilo se nanaša na standard prEN 15500-1, Nadzor za ogrevanje, prezračevanje in klimatizacijo – 1. del: Elektronska oprema za nadzor posameznih območij – moduli M3-5,M4-5,M5-5.
Vsebuje informacije za podporo pravilnega razumevanja, uporabe in nacionalne prilagoditve standarda prEN 15500-1:2015.
To tehnično poročilo ne vsebuje nobenih normativnih določb.

General Information

• Status: Published
• Public Enquiry End Date: 09-Mar-2016
• Publication Date: 17-Apr-2018
• ICS: 91.140.10 - Central heating systems
• ICS: 91.140.30 - Ventilation and air-conditioning systems
• ICS: 97.120 - Automatic controls for household use
• Technical Committee: OGS - Heating for buildings
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2017
• Due Date: 08-Apr-2017
• Completion Date: 18-Apr-2018
• Directive: 2010/31/EU - Directive 2010/31/eu of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast)
• Mandate: M/480 - Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance buildings (2010/31/EU)
• Ref Project: CEN/TR 15500-2:2016 - Energy Performance of Buildings - Control for heating, ventilating and air-conditioning applications — Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 15500-2:2018
01-maj-2018
(QHUJLMVNHODVWQRVWLVWDYE1DSUDYH]DUHJXODFLMRVLVWHPRY]DRJUHYDQMH
SUH]UDþHYDQMHLQNOLPDWL]DFLMRGHO5D]ODJDLQXWHPHOMLWHYSU(1
0RGXOL000
Energy Performance of Buildings - Control for heating, ventilating and air-conditioning
applications - Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5
Ta slovenski standard je istoveten z: CEN/TR 15500-2:2016
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
91.140.30 3UH]UDþHYDOQLLQNOLPDWVNL Ventilation and air-
VLVWHPL conditioning systems
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST-TP CEN/TR 15500-2:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 15500-2:2018

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 15500-2:2018


CEN/TR 15500-2
TECHNICAL REPORT

RAPPORT TECHNIQUE

August 2016
TECHNISCHER BERICHT
ICS 97.120; 91.140.30
English Version

Energy Performance of Buildings - Control for heating,
ventilating and air-conditioning applications - Part 2:
Accompanying TR prEN 15500-1:2015 - Modules M3-
5,M4-5,M5-5
 Begleitender TR zu EN 15500


This Technical Report was approved by CEN on 11 April 2016. It has been drawn up by the Technical Committee CEN/TC 247.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15500-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 15500-2:2018
CEN/TR 15500-2:2016 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Symbols and abbreviations . 8
4.1 Symbols . 8
4.2 Abbreviations . 8
5 Functional and acceptance test . 8
5.1 Objective of the Test methodology . 8
5.2 Testing procedures — Test principle . 8
5.3 Test parameters. 9
5.3.1 Temperature parameters . 9
5.3.2 Time parameters . 10
5.3.3 Product configuration . 10
6 Definition of Control Accuracy (CA), Control Variation (CV) and Control to Setpoint
Deviation (CSD) . 11
6.1 General . 11
6.2 Definition of the Control Accuracy for heating (CA ) . 12
H
6.3 Definition of the Control Accuracy for cooling (CAC) . 13
6.4 Definition of CV and CSD . 13
7 Test facility description — General layout . 13
8 Sensor side interface . 15
8.1 General . 15
8.2 Temperature interface for the controller . 15
8.2.1 Option 1 - Sensor resistance simulator . 15
8.2.2 Option 2 - Climatic box . 16
8.3 Pressure interface for the controller (VAV application) . 17
8.3.1 General . 17
8.3.2 Pressure generator . 17
8.3.3 Voltage signal . 18
8.4 Actuator side interface . 18
8.4.1 General . 18
8.4.2 Interface for real valve/drive combinations . 19
8.4.3 Interface for other outputs . 20
8.5 Interface between real and simulated environment. 20
8.5.1 General . 20
8.5.2 Link from simulated to real environment . 21
8.5.3 Link from real to simulated environment . 21
8.6 Simulated environment . 21
8.7 Data acquisition system . 21
8.7.1 Function . 21
8.7.2 Specifications . 21
2

---------------------- Page: 4 ----------------------

SIST-TP CEN/TR 15500-2:2018
CEN/TR 15500-2:2016 (E)
Annex A (informative) Data . 22
A.1 Objective . 22
A.2 Applications . 22
A.3 Building and zone types . 22
A.3.1 Building types . 22
A.3.2 Zone types . 23
A.4 Default time test parameters . 23
Bibliography . 24

3

---------------------- Page: 5 ----------------------

SIST-TP CEN/TR 15500-2:2018
CEN/TR 15500-2:2016 (E)
European foreword
This document (CEN/TR 15500-2:2016) has been prepared by Technical Committee CEN/TC 247
“Building Automation, Controls and Building Management”, the secretariat of which is held by SNV.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document is currently divided into the following parts:
— Control for heating, ventilating and air-conditioning applications — Part 1: Electronic individual
zone control equipment — Modules M3-5,M4-5,M5-5 [currently at Enquiry stage];
— Control for heating, ventilating and air-conditioning applications — Part 2: Accompanying
prEN 15500-1:2016 Modules M3-5,M4-5,M5-5 [the present Technical Report; currently at Voting stage].
4

---------------------- Page: 6 ----------------------

SIST-TP CEN/TR 15500-2:2018
CEN/TR 15500-2:2016 (E)
Introduction
The CENSE project, the discussions between CEN and the Concerted action highlighted the high page
count of the entire package due to a lot of “textbook” information. This resulted in flooding and
confusing the normative text.
A huge amount of informative contents shall indeed be recorded and available for users to properly
understand, apply and nationally adapt the EPB standards.
The detailed technical rules CEN/TS 16629 Detailed Technical Rules ask for a clear separation between
normative and informative contents:
— to avoid flooding and confusing the actual normative part with informative content;
— to reduce the page count of the actual standard;
— to facilitate understanding of the package.
Therefore each EPB standard shall be accompanied by an informative technical report, like this one,
where all informative contents is collected.
Table 1 shows the relative position of this TR within the EN EPB set of standards.
5

---------------------- Page: 7 ----------------------

SIST-TP CEN/TR 15500-2:2018
CEN/TR 15500-2:2016 (E)
Table 1 — Position of this TR within the EPBD set of standards
Over- Building Technical Building System
arching (as such)
M1 M2  M3 M4 M5 M6 M7 M8 M9 M10 M11
General General General
Common
terms and
Building
definitions;
Energy Needs
symbols,
Needs
units and
subscripts
(Free) Indoor
Maximum
Conditions
Application Load and
without
Power
Systems
Ways to Ways to Ways to
Express Express Express

Energy Energy Energy
Performance Performance Performance
Building
Heat
Functions Emission
Transfer by x x x
and Building and control
Transmission
Boundaries
Building Heat
Occupancy Transfer by
Distribution
and Infiltration
and control
Operating and
Conditions Ventilation
Aggregation
of Energy
Internal Heat Storage and
Services and
Gains control
Energy
Carriers
Building Solar Heat Generation

Partitioning Gains and control
Load
Building
Calculated dispatching
Dynamics
Energy and
(thermal
Performance operating
mass)
conditions
6
Descriptions
Descriptions
Descriptions
Heating
Cooling
Ventilation
Humidification
Dehumidification
Domestic Hot
waters
Lighting
Building
automation and
control
PV, wind, .

---------------------- Page: 8 ----------------------

SIST-TP CEN/TR 15500-2:2018
CEN/TR 15500-2:2016 (E)
Over- Building Technical Building System
arching (as such)
M1 M2  M3 M4 M5 M6 M7 M8 M9 M10 M11
Measured Measured Measured
Energy Energy Energy
Performance Performance Performance
Inspection Inspection Inspection
Ways to
Express
 BMS
Indoor
Comfort
External
Environment
Conditions
Economic

Calculation
1 Scope
This Technical Report refers to prEN 15500-1, Control for heating, ventilating and air-conditioning
applications — Part 1: Electronic individual zone control equipment — Modules M3-5,M4-5,M5-5.
It contains information to support the correct understanding, use and national adaption of
prEN 15500-1:2016.
This Technical Report does not contain any normative provision.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
prEN 15500-1:2016, Control for heating, ventilating and air-conditioning applications — Part 1:
Electronic individual zone control equipment — Modules M3-5,M4-5,M5-5
EN ISO 7345:1995, Thermal insulation - Physical quantities and definitions (ISO 7345:1987)
prEN ISO 52000-1:2016, Energy performance of buildings — Overarching EPB assessment — Part 1:
General framework and procedures (ISO/DIS 52000-1:2015)
7
Descriptions
Descriptions
Descriptions
Heating
Cooling
Ventilation
Humidification
Dehumidification
Domestic Hot
waters
Lighting
Building
automation and
control
PV, wind, .

---------------------- Page: 9 ----------------------

SIST-TP CEN/TR 15500-2:2018
CEN/TR 15500-2:2016 (E)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN ISO 7345:1995,
prEN ISO 52000-1:2016 and prEN 15500-1:2016 (the accompanied EPB standard) apply.
4 Symbols and abbreviations
4.1 Symbols
For the purposes of this Technical Report, the symbols given in prEN ISO 52000-1:2016 and
prEN 15500-1:2016 (the accompanied EPB standard) apply.
4.2 Abbreviations
For the purposes of this Technical Report, the abbreviations given in prEN ISO 52000-1:2016 and
prEN 15500-1:2016 (the accompanied EPB standard) apply.
5 Functional and acceptance test
5.1 Objective of the Test methodology
This section provides a test method for the compliance of controllers with the specified control
accuracy in EN 15500-1:2016, 5.4. For the facility of the reader, these definitions will be duplicated in
this Technical Report.
This consists of the following elements:
— testing procedures;
— test facilities description: gives a description of the different equipment pertaining to the bench,
their functions, requirements and specifications;
— description of the simulator: gives details about the simulator framework, user interfaces, models
layout and the running of the tests.
The time parameters for the test procedures are given in the informative Annex A.
5.2 Testing procedures — Test principle
This standard covers the test of a terminal control loop as shown in Figure 1.
The temperature in the room is measured by the temperature sensor of a controller which commands
then the HVAC terminal system in the room, via an actuator e.g. actuator/valve combination for water
systems.
8

---------------------- Page: 10 ----------------------

SIST-TP CEN/TR 15500-2:2018
CEN/TR 15500-2:2016 (E)

Figure 1 — Example for Control loop for HVAC terminal systems
The test of this controller is carried out by emulation technique in transient state and the real controller
to be tested is implemented in a simulated environment with the room (dynamic model of the heat and
mass transfer) and the HVAC system (Figure 1). The room temperature is finally used to assess the
performance of the controller.
In this approach, the sensor as well as the actuator can be real or simulated.
The test procedures and parameters are described in the following sections.
5.3 Test parameters
5.3.1 Temperature parameters
Tests are conducted by simulating three periods of 20 %, 50 % and 80 % load conditions for HVAC
emitter during heating and cooling tests. The variation of the internal gains in the zone presents also
three periods: 0 %, 30 % and 60 % of the load. Following these variations of the load and internal gains,
six periods are defined:
9

---------------------- Page: 11 ----------------------

SIST-TP CEN/TR 15500-2:2018
CEN/TR 15500-2:2016 (E)
Table 2 — Definition of the variable test parameters
Period Thermal state of the Internal gain Heating load Cooling load
zone
P1 overshoot
0 % 80 % 20 %
P2 transient
P3 overshoot
30 % 50 % 50 %
P4 transient
P5 overshoot
60 % 20 % 80 %
P6 transient
Tests are performed with the fixed parameters described in Table 3.
Table 3 — Fixed test parameters and room temperature setpoint
Parameter Heating Cooling
Temperature setpoint 20 °C 24 °C
Initial zone temperature 20 °C 24 °C
Outdoor temperature −4 °C 30 °C
5.3.2 Time parameters
The test is split into 6 periods to evaluate the zone controllers performance at three load conditions,
when the controller output is in the process of stabilizing (following a change in load condition) and
when the output is considered stable (after time period T1) as shown in next table. The period T1 is
defined in order to avoid the overshoot of the controller. The period T2 is defined in order to qualify the
performance of the controller associated to a transient state of the building (zone) thermal behaviour
(Table 4).
Table 4 — Period of tests
Period Internal gains
...