iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50069:1998

(Main)

Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear

Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear

This standard applies to welded composite enclosures of cast and wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear with rated voltages of 72,5 kV and above, where the gas is used principally for its dielectric and/or arc-quenching properties. The enclosures comprise parts of electrical equipment not necessarily limited to the following examples: circuit-breakers, switch-disconnectors, disconnectors, earthing switches, current transformers, voltage transformers, surge arrestors, busbars and connections. The scope covers also pressurized components such as the centre-chamber of live tank switchgear and controlgear, gas-insulated current transformers, etc.

Geschweißte Kapselungen von Teilen aus Leichtmetallguß und Aluminium-Knetlegierungen für gasgefüllte Hochspannungs-Schaltegeräte und -Schaltanlagen

Enveloppes soudées en alliage d'aluminium comportant des parties moulées et des parties en métal corroyé pour l'appareillage à haute tension sous pression de gaz

Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear

General Information

Status
Withdrawn
Publication Date
31-Jan-1998
Withdrawal Date
19-Sep-2021
ICS
29.130.10 - High voltage switchgear and controlgear
77.150.10 - Aluminium products
Technical Committee
SKA - Switchgear and control gear
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Sep-2021
Due Date
10-Oct-2021
Completion Date
20-Sep-2021
Ref Project
EN 50069:1991 - Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear

Relations

Amended By
SIST EN 50069:1998/A1:1998 - Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
Effective Date
21-Sep-2010
Amended By
SIST EN 50069:1998/A1:1998 - Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
Effective Date
28-Jan-2023
Replaced By
SIST EN 50069:2019 - High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
Effective Date
06-Nov-2018
Amended By
SIST EN 50069:1998/A1:1998 - Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
Effective Date
07-Jun-2022
Replaced By
SIST EN 50069:2019 - High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
Effective Date
07-Jun-2022
Revised
SIST EN 50069:2019 - High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
Effective Date
15-Nov-2016

Buy Standard

EN 50069:1998EN 50069:1998
PreviousNext
Standard
EN 50069:1998
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50069:1998
01-februar-1998
Welded composite enclosures of cast and wrought aluminium alloys for gas-filled
high-voltage switchgear and controlgear
Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-
voltage switchgear and controlgear
Geschweißte Kapselungen von Teilen aus Leichtmetallguß und Aluminium-
Knetlegierungen für gasgefüllte Hochspannungs-Schaltegeräte und -Schaltanlagen
Enveloppes soudées en alliage d'aluminium comportant des parties moulées et des
parties en métal corroyé pour l'appareillage à haute tension sous pression de gaz
Ta slovenski standard je istoveten z: EN 50069:1991
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 50069:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50069:1998

---------------------- Page: 2 ----------------------

SIST EN 50069:1998

---------------------- Page: 3 ----------------------

SIST EN 50069:1998

---------------------- Page: 4 ----------------------

SIST EN 50069:1998

---------------------- Page: 5 ----------------------

SIST EN 50069:1998

---------------------- Page: 6 ----------------------

SIST EN 50069:1998

---------------------- Page: 7 ----------------------

SIST EN 50069:1998

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50064:2019(Main)
High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
EN 50064:2018

This European Standard applies to welded wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages.
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:   
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50069:2019(Main)
High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
EN 50069:2018

This European Standard applies to welded composite enclosures of cast and wrought aluminium alloy pressurized with dry air, inert gases (e.g. sulphur hexafluoride or nitrogen or a mixture of such gases), used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50052:2017(Main)
Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
EN 50052:2016

This standard applies to cast aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear above 1 kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   Circuit-breakers;
-   Switch-disconnectors;
-   Disconnectors;
-   Earthing switches;
-   Current transformers;
-   Voltage transformers;
-   Surge arrestors;
-   Busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50064:2019(Main)
High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
EN 50064:2018

This European Standard applies to welded wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages.
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:   
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50069:2019(Main)
High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
EN 50069:2018

This European Standard applies to welded composite enclosures of cast and wrought aluminium alloy pressurized with dry air, inert gases (e.g. sulphur hexafluoride or nitrogen or a mixture of such gases), used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50052:2017(Main)
Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
EN 50052:2016

This standard applies to cast aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear above 1 kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   Circuit-breakers;
-   Switch-disconnectors;
-   Disconnectors;
-   Earthing switches;
-   Current transformers;
-   Voltage transformers;
-   Surge arrestors;
-   Busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day