SIST EN 12493:2013+A1:2014/kFprA2:2017

LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture

This European Standard specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker pressure vessels and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels.
There is no upper size limit as this is determined by the gross vehicle weight limitation.
This European Standard does not cover pressure vessels for pressure vessel containers.
NOTE 1 In the context of this standard the term "road tanker" is understood to mean "fixed tanks" and "demountable tanks" as defined in ADR.
NOTE 2 The equipment for the pressure vessels and the inspection and testing after assembly is covered by EN 12252 and EN 14334, respectively.
NOTE 3 The design type of the road tanker is subject to approval by the competent authority, as required by ADR.

Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für Straßentankwagen für Flüssiggas (LPG) - Auslegung und Herstellung

Diese Europäische Norm legt Mindestanforderungen an Werkstoffe, Auslegung, Bau und Ausführungsverfahren sowie Prüfungen für geschweißte Druckbehälter für Straßentankwagen für Flüssiggas (LPG, en: liquefied petroleum gas) und deren angeschweißtes Zubehör fest, die aus Kohlenstoffstahl, Kohlenstoff Manganstahl und mikrolegiertem Stahl hergestellt werden.
Es besteht keine Obergrenze für die Größe, da diese durch die Begrenzung der Bruttomasse des Fahrzeuges festgelegt wird.
Diese Europäische Norm gilt nicht für Druckbehälter für Tankcontainer.
ANMERKUNG 1   Im Sinne dieser Norm ist der Begriff „Straßentankwagen“ entsprechend der Definition im ADR als „fest verbundene Tanks“ und „Aufsetztanks“ zu verstehen.
ANMERKUNG 2   Die Ausrüstung der Druckbehälter sowie die Inspektion und Prüfung nach dem Zusammenbau ist durch EN 12252 bzw. EN 14334 abgedeckt.
ANMERKUNG 3   Das Baumuster des Straßentankwagens unterliegt entsprechend der Anforderung des ADR einer Zulassung durch die zuständige Behörde.

Équipements pour GPL et leurs accessoires - Réservoirs sous pression en acier soudés des camions-citernes pour GPL - Conception et construction

La présente Norme européenne spécifie les exigences minimales relatives aux matériaux, à la conception, à la construction et à la qualité d’exécution, ainsi que les essais des réservoirs sous pression soudés de camions-citernes utilisés pour le transport du GPL et de leurs accessoires soudés fabriqués en acier au carbone, en acier au carbone/manganèse et en acier micro-allié.
La présente norme ne définit pas de taille limite supérieure pour le réservoir étant donné que celle-ci sera déterminée par la limite du poids total en charge du véhicule.
La présente Norme européenne ne couvre pas les réservoirs sous pression destinés à des conteneurs-citernes.
NOTE 1   Dans le cadre de la présente norme, le terme « camion-citerne » signifie « réservoirs fixes » et « réservoirs démontables » comme définis dans l'ADR.
NOTE 2   L'équipement des camions-citernes et leurs contrôles et essais après construction sont couverts respectivement par les normes EN 12252 et EN 14334.
NOTE 3   Le mode de conception du camion-citerne est sujet à l'approbation de l'autorité compétente comme prévu dans l'ADR.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Varjene tlačne posode cestnih cistern iz jekla za UNP - Konstruiranje in proizvodnja - Dopolnilo A2

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Jan-2017
• ICS: 23.020.32 - Pressure vessels
• ICS: 43.080.10 - Trucks and trailers
• Technical Committee: TLP - Pressure vessels
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 05-Oct-2018
• Due Date: 10-Oct-2018
• Completion Date: 05-Oct-2018
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: EN 12493:2013+A1:2014/FprA2 - LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture

Relations

• Consolidated By: SIST EN 12493:2013+A2:2018 - LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
• Effective Date: 18-Jan-2023
• Revised: SIST EN 12493:2013+A1:2014 - LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
• Effective Date: 01-Jan-2017
• Consolidated By: SIST EN 12493:2013+A2:2018 - LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
• Effective Date: 01-Nov-2018
• Consolidated By: SIST EN 12493:2013+A2:2018 - LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12493:2013+A1:2014/oprA2:2017
01-januar-2017
2SUHPDLQSULERU]DXWHNRþLQMHQLQDIWQLSOLQ8139DUMHQHWODþQHSRVRGHFHVWQLK
FLVWHUQL]MHNOD]D813.RQVWUXLUDQMHLQSURL]YRGQMD'RSROQLOR$
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers -
Design and manufacture
Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für
Straßentankwagen für Flüssiggas (LPG) - Auslegung und Herstellung
Équipements pour GPL et leurs accessoires - Réservoirs sous pression en acier soudés
des camions-citernes pour GPL - Conception et construction
Ta slovenski standard je istoveten z: EN 12493:2013+A1:2014/prA2
ICS:
23.020.32 7ODþQHSRVRGH Pressure vessels
43.080.10 Tovornjaki in priklopniki Trucks and trailers
SIST EN en,fr,de
12493:2013+A1:2014/oprA2:2017
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12493:2013+A1:2014/oprA2:2017

---------------------- Page: 2 ----------------------

SIST EN 12493:2013+A1:2014/oprA2:2017


DRAFT
EUROPEAN STANDARD
EN 12493:2013+A1:2014
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
December 2016
ICS 23.020.30
English Version

LPG equipment and accessories - Welded steel pressure
vessels for LPG road tankers - Design and manufacture
Équipements pour GPL et leurs accessoires - Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte
Réservoirs sous pression en acier soudés des camions- Druckbehälter aus Stahl für Straßentankwagen für
citernes pour GPL - Conception et construction Flüssiggas (LPG) - Auslegung und Herstellung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 286.

This draft amendment A2, if approved, will modify the European Standard EN 12493:2013+A1:2014. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12493:2013+A1:2014/prA2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12493:2013+A1:2014/oprA2:2017
EN 12493:2013+A1:2014/prA2:2016 (E)
Contents Page
European foreword . 3
1 Modification to the Introduction . 4
2 Modification to Clause 1, Scope . 4
3 Modifications to Clause 2, Normative references . 4
3.1 Replacement of EN 287-1 . 4
3.2 Replacement of EN 444 . 4
3.3 Replacement of EN 462-1 . 4
4 Modification to 5.2, Minimum thickness . 5
5 Modifications to 5.3, Surge plates . 5
6 Modification to 5.4, Doubler plates . 5
7 Modification to 5.5, Stresses due to motion . 5
8 Modification to 8.6.5, Qualification of welders and welding operators . 5
9 Modification to 8.9.2, Repair of surface imperfections in the parent metal . 5
10 Modification to 8.9.3, Repair of weld imperfections . 6
11 Modifications to 10.4.1, Radiographic testing . 6
11.1 Replacement of EN 444 with EN ISO 5579 . 6
11.2 Replacement of EN 462-1 with EN ISO 19232-1 . 6
12 Modifications to 10.8, Stress limitation and safety precautions at the hydraulic test . 6
12.1 Modification to the title . 6
st
12.2 Deletion of the 1 paragraph . 6
13 Modification to 13.2, Records prepared by the manufacturer . 6
14 Modifications to D.1, Design stresses . 6
15 Modification to D.2, Design pressure . 7
16 Modification to D.3.1, Cylindrical shell calculation . 7
17 Modification to D.3.2.1, Minimum thickness . 7
18 Modification to D.4, Nozzle reinforcement . 7
19 Deletion of Annex L (informative), Environmental checklist . 7
20 Modifications to the final Bibliography . 7

2

---------------------- Page: 4 ----------------------

SIST EN 12493:2013+A1:2014/oprA2:2017
EN 12493:2013+A1:2014/prA2:2016 (E)
European foreword
This document (EN 12493:2013+A1:2014/prA2:2016) has been prepared by Technical Committee
CEN/TC 286 “Liquefied petroleum gas equipment and accessories”, the secretariat of which is held by
NSAI.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free
...