iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 9013:2017/A1:2024

(Amendment)

Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)

Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)

Thermisches Schneiden - Einteilung thermischer Schnitte - Geometrische Produktspezifikation und Qualität - Änderung 1 (ISO 9013:2017/Amd 1:2024)

Coupage thermique - Classification des coupes thermiques - Spécification géométrique des produits et tolérances relatives à la qualité - Amendement 1 (ISO 9013:2017/Amd 1:2024)

Toplotno rezanje - Razvrstitev toplotnih rezov - Geometrijska specifikacija izdelkov in tolerance kakovosti - Dopolnilo A1 (ISO 9013:2017/Amd 1:2024)

General Information

Status
Published
Public Enquiry End Date
29-Feb-2024
Publication Date
12-Nov-2024
ICS
17.040.20 - Properties of surfaces
17.040.30 - Measuring instruments
25.160.10 - Welding processes
Technical Committee
VAR - Welding
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
20-Sep-2024
Due Date
25-Nov-2024
Completion Date
13-Nov-2024
Ref Project
EN ISO 9013:2017/A1:2024 - Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)

Relations

Amends
SIST EN ISO 9013:2017 - Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
Effective Date
01-Dec-2024

Buy Standard

EN ISO 9013:2017/A1:2024EN ISO 9013:2017/A1:2024
PreviousNext
Amendment
EN ISO 9013:2017/A1:2024
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2024
Toplotno rezanje - Razvrstitev toplotnih rezov - Geometrijska specifikacija izdelkov
in tolerance kakovosti - Dopolnilo A1 (ISO 9013:2017/Amd 1:2024)
Thermal cutting - Classification of thermal cuts - Geometrical product specification and
quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)
Thermisches Schneiden - Einteilung thermischer Schnitte - Geometrische
Produktspezifikation und Qualität - Änderung 1 (ISO 9013:2017/Amd 1:2024)
Coupage thermique - Classification des coupes thermiques - Spécification géométrique
des produits et tolérances relatives à la qualité - Amendement 1 (ISO 9013:2017/Amd
1:2024)
Ta slovenski standard je istoveten z: EN ISO 9013:2017/A1:2024
ICS:
17.040.20 Lastnosti površin Properties of surfaces
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 9013:2017/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 25.160.10
English Version
Thermal cutting - Classification of thermal cuts -
Geometrical product specification and quality tolerances -
Amendment 1 (ISO 9013:2017/Amd 1:2024)
Coupage thermique - Classification des coupes Thermisches Schneiden - Einteilung thermischer
thermiques - Spécification géométrique des produits et Schnitte - Geometrische Produktspezifikation und
tolérances relatives à la qualité - Amendement 1 (ISO Qualität - Änderung 1 (ISO 9013:2017/Amd 1:2024)
9013:2017/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 9013:2017; it was approved by CEN on 16 April 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9013:2017/A1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 9013:2017/A1:2024) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and
allied processes” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 9013:2017 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2025, and
conflicting national standards shall be withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 9013:2017/Amd 1:2024 has been approved by CEN as EN ISO 9013:2017/A1:2024
without any modification.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 14356:2024(Main)
Dentistry - Duplicating material (ISO 14356:2024)
EN ISO 14356:2024

ISO 14356:2002 specifies requirements and tests for the duplicating materials used in dentistry which are primarily intended for forming flexible moulds needed to produce positive refractory investment copies of properly blocked-out master models.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ES 201 873-1 V4.16.1:2025(Main)
Methods for Testing and Specification (MTS) - The Testing and Test Control Notation version 3 - Part 1: TTCN-3 Core Language
ETSI ES 201 873-1 V4.16.1 (2024-10)

RES/MTS-201873-1v4.16.1

  • Standard
    395 pages
    English language
    sale 15% off
  • Standard
    395 pages
    English language
    sale 15% off
  • Standardization document
    395 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63296-2:2024(Main)
Portable multimedia equipment - Determination of battery duration - Part 2: Headphones and earphones with active noisecancelling functions (IEC 63296-2:2023)
EN IEC 63296-2:2024

IEC 63296-2:2023 is applicable to active acoustic noise-cancelling headphones and earphones that have the function of reducing the ambient noise heard by the user by the level of the output sound from the transducer, which is generated by the ambient noise detection microphone and the noise reduction signal processing circuit.
This document covers headphones and earphones to be worn over-the-ear or in-ear, all of which are referred to as "headphones" in this document.
This document specifies the terms and definitions relating to battery duration of this type of headphones and the measurement and evaluation methods.
The noise-detection microphones are mounted in the body, on the surface, or on an accessory of the headphones. Signal-processing circuits are analogue and digital electronic circuits.
This document does not deal with equipment intended for hearing protection. It is also not applicable to music players, recorders, etc. that have a noise-cancelling function.
The battery duration measurement methods can be applied to headphones having no active noise-cancelling function.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14071:2024(Main)
Environmental management - Life cycle assessment - Critical review processes and reviewer competencies (ISO 14071:2024)
EN ISO 14071:2024

ISO/TS 14071:2014 provides additional specifications to ISO 14040:2006 and ISO 14044:2006. It provides requirements and guidelines for conducting a critical review of any type of LCA study and the competencies required for the review.
ISO/TS 14071:2014 provides:
details of a critical review process, including clarification with regard to ISO 14044:2006;
guidelines to deliver the required critical review process, linked to the goal of the life cycle assessment (LCA) and its intended use;
content and deliverables of the critical review process;
guidelines to improve the consistency, transparency, efficiency and credibility of the critical review process;
the required competencies for the reviewer(s) (internal, external and panel member);
the required competencies to be represented by the panel as a whole.
ISO/TS 14071:2014 does not cover the applications of LCA.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14803:2020+A1:2025(Main + Amendment)
Waste management - Identification and/or determination of the quantity of waste
EN 14803:2020+A1:2024

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14986:2024(Main)
Design of fans working in potentially explosive atmospheres
EN 14986:2024

1.1   This document specifies the constructional requirements for fans constructed to Group II G (of explosion groups IIA, IIB and hydrogen) categories 1, 2 and 3, and Group II D categories 2 and 3, intended for use in explosive atmospheres.
NOTE 1   Operation conditions for the different categories of fans used in this document are defined in Clause 4.
NOTE 2   For category 1 D fans, requirements provided in this document are not sufficient to ensure safety. In addition, explosion protection measures as specified in EN 1127 1:2019 are required to prevent ignition in the case of rare malfunctions.
NOTE 3   Technical requirements for explosion group IIC (other than hydrogen) are not given in this document. Where such atmospheres are present, additional explosion protection measures as specified in EN 1127 1:2019 can be needed.
1.2   This document does not apply to group I fans (fans for mining), cooling fans or impellers on rotating electrical machines, cooling fans or impellers on internal combustion engines, vehicles or electric motors.
NOTE 1   Requirements for group I fans are given in EN ISO/IEC 80079 38:2016.
NOTE 2   The requirements for electrical parts are covered by references to electrical equipment standards.
1.3   This document specifies requirements for design, construction, testing and marking of complete fan units intended for use in potentially explosive atmospheres in air containing gas, vapour, mist and/or dusts. Such atmospheres can exist inside (the conveyed atmosphere (flammable or not)), outside, or inside and outside of the fan.
NOTE   This document covers mechanical equipment, in particular fans. The “protection concept” as specified in EN ISO 80079 37:2016 is constructional safety. Requirements for marking are given in EN ISO 80079 37:2016.
1.4   This document is applicable to fans working in ambient atmospheres and with normal atmospheric conditions at the inlet, having
—   absolute pressures ranging from 0,8 bar to 1,1 bar,
—   and temperatures ranging from −20 °C to +60 °C,
—   and maximum volume fraction of 21 % oxygen content,
—   and an aerodynamic energy increase of less than 25 kJ/kg.
NOTE 1   25 kJ/kg is equivalent to 30 kPa at inlet density of 1,2 kg/m3.
This document can also be helpful for the design, construction, testing and marking of fans intended for use in atmospheres outside the validity range stated above or in cases where other material pairings need to be used. In this case, the ignition risk assessment, ignition protection provided, additional testing (if necessary), manufacturer's marking, technical documentation and instructions to the user, clearly demonstrate and indicate the equipment's suitability for the conditions the fan can encounter.
NOTE 2   Temperatures below −20°C can be considered. Material suitability can require specific evaluation for these temperatures. With lower temperature the explosion pressure increases, which leads to increased test pressures (see A.3) and can require specific testing. Although the standard atmospheric conditions in EN ISO 80079 36:2016 give a temperature range for the atmosphere of −20 °C to +60 °C the normal ambient temperature range for the equipment is −20 °C to +40 °C unless otherwise specified and marked.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18562-1:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 1: Evaluation and testing within a risk management process (ISO 18562-1:2024)
EN ISO 18562-1:2024

ISO 18562-1:2017 specifies:
- the general principles governing the biological evaluation within a risk management process of the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments;
- the general categorization of gas pathways based on the nature and duration of their contact with the gas stream;
- the evaluation of existing relevant data from all sources;
- the identification of gaps in the available data set on the basis of a risk analysis;
- the identification of additional data sets necessary to analyse the biological safety of the gas pathway;
- the assessment of the biological safety of the gas pathway.
ISO 18562-1:2017 covers general principles regarding biocompatibility assessment of medical device materials, which make up the gas pathway, but does not cover biological hazards arising from any mechanical failure, unless the failure introduces a toxicity risk (e.g. by generating particulates). The other parts of ISO 18562 cover specific tests that address potentially hazardous substances that are added to the respirable gas stream and establish acceptance criteria for these substances.
ISO 18562-1:2017 addresses potential contamination of the gas stream arising from the gas pathways within the medical device, which might then be conducted to the patient.
ISO 18562-1:2017 applies over the expected service life of the medical device in normal use and takes into account the effects of any intended processing or reprocessing.
ISO 18562-1:2017 does not address biological evaluation of the surfaces of medical devices that are in direct contact with the patient. The requirements for direct contact surfaces are found in the ISO 10993 series.
Medical devices, parts or accessories containing gas pathways that are addressed by this document include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving equipment, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, mouth pieces, resuscitators, breathing tubes, breathing system filters and Y-pieces as well as any breathing accessories intended to be used with such medical devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document.
ISO 18562-1:2017 does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use.
EXAMPLE Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder, or room air taken into the medical device is not addressed by ISO 18562 (all parts).
Future parts might be added to address other relevant aspects of biological testing including additional contamination that might arise from the gas pathway because of the presence of drugs and anaesthetic agents added to the gas stream.
NOTE 1 Some authorities having jurisdiction require evaluation of these risks as part of a biological evaluation.
NOTE 2 This document has been prepared to address the relevant essential principles of safety and performance as indica

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16906:2025(Main)
Resilient floor coverings - Determination of seam strength (ISO 16906:2015)
EN ISO 16906:2024

This International Standard specifies a method for determining the strength of the seams of resilient
floor coverings when welded in accordance with the manufacturer’s instructions.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16838:2025(Main)
Refrigerated display scooping cabinets and pozzetto for gelato - Classification, requirements, performance and energy consumption testing
EN 16838:2024

This document specifies classification, requirements for the construction, performance and energy consumption testing of gelato scooping cabinets and pozzetto used to sale and/or display artisan and self made gelato. It specifies test conditions and methods for checking that the requirements have been satisfied, their marking and the list of their characteristics to be declared by the manufacturer.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14988:2017+A2:2024(Main + Amendment)
Children's high chairs - Requirements and test methods
EN 14988:2017+A2:2024

This European Standard specifies safety requirements for free standing children's high chairs that elevate children to dining table height usually for the purposes of feeding or eating. Children's high chairs are for children up to 3 years of age who are capable of sitting unaided.
With the exception of special high chairs for medical purposes, this standard applies to children's high chairs for domestic and non-domestic use.
NOTE If a children's high chair has to or can be converted into other functions, additional European Standards may apply.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day