SIST EN 15380-1:2006
(Main)Railway applications - Designation system for railway vehicles - Part 1: General principles
Railway applications - Designation system for railway vehicles - Part 1: General principles
As a railway-specific technical standard, this European Standard specifies the designation system for technical products and technical project documentation. It takes into account the general rules for structuring principles according to EN 61346-1 and designations according to EN 61355.
The European Standard specifies the structure and content of the designation sets required in the technical project documentation.
The designation depends on the aspect used, see Annex C, individually or in designation set combinations, i.e.:
- product groups according to EN 15380-2;
- installation site/location according to EN 15380-3;
function structure according to DIN 25002-5.
Bahnanwendungen - Kennzeichnungssystematik für Schienenfahrzeuge - Teil 1: Grundlagen
Diese Europäische Norm legt als bahnspezifische Fachnorm die Kennzeichnungssystematik technischer Produkte und technischer Projektdokumentation fest. Hierbei sind die allgemeinen Regeln für Strukturierungsprinzipien nach EN 61346-1 und Kennzeichnungen nach EN 61355 berücksichtigt.
Diese Europäische Norm legt Aufbau und Inhalt der Kennzeichnungsblöcke fest, die innerhalb der technischen Projektdokumentation benötigt werden.
Die Kennzeichnung erfolgt je nach angewendetem Aspekt, siehe Anhang C, einzeln oder in Kombination der Kennzeichnungsblöcke, und zwar:
- Produktgruppen nach EN 15380-2;
- Aufstellungs- / Einbauort nach EN 15380-3;
- Funktionsstruktur nach DIN 25002-5.
Applications ferroviaires - Systeme de classification pour véhicules ferroviaires - Partie 1: Regles générales
La présente Norme européenne spécifique des matériels ferroviaires établit un système de classification des produits techniques et de la documentation technique des projets. Ce faisant, elle tient compte des règles générales applicables aux principes de structuration selon l'EN 61346-1 et aux désignations selon l'EN 61355. La présente Norme européenne spécifie la structure et le contenu des blocs de désignation utilisés dans la documentation technique des projets. La désignation, qui est fonction de l'aspect envisagé (voir Annexe C), est isolée ou combine des blocs de désignation, à savoir :
- groupes de produits, selon l'EN 15380-2 ;
- position d'installation/emplacement sur le véhicule, selon l'EN 15380-3 ;
- structure fonctionnelle, selon la DIN 25002-5.
Železniške naprave – Sistem označevanja železniških vozil – 1. del: Splošna načela
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Railway applications - Designation system for railway vehicles - Part 1: General principlesApplications ferroviaires - Systeme de classification pour véhicules ferroviaires - Partie 1: Regles généralesBahnanwendungen - Kennzeichnungssystematik für Schienenfahrzeuge - Teil 1: GrundlagenTa slovenski standard je istoveten z:EN 15380-1:2006SIST EN 15380-1:2006en45.060.01Železniška vozila na splošnoRailway rolling stock in general01.110L]GHONHTechnical product documentationICS:SLOVENSKI
STANDARDSIST EN 15380-1:200601-oktober-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15380-1April 2006ICS 01.110; 45.060.01 English VersionRailway applications - Designation system for railway vehicles -Part 1: General principlesApplications ferroviaires - Système de classification pourvéhicules ferroviaires - Partie 1: Règles généralesBahnanwendungen - Kennzeichnungssystematik fürSchienenfahrzeuge - Teil 1: GrundlagenThis European Standard was approved by CEN on 6 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15380-1:2006: E
EN 15380-1:2006 (E) 2 Contents Page Foreword.4 1 Scope.5 2 Normative references.6 3 Terms and definitions.7 4 General principles of the designation system.8 4.1 General.8 4.2 Structuring of the designation.8 5 Rules for the structure of designation sets.9 6 Structure and content of the designation sets.9 6.1 General.9 6.2 Function aspect.9 6.2.1 "Function-oriented structure" designation set.9 6.3 Product aspect.10 6.3.1 "Product" designation set.10 6.3.2 "Object" designation set.11 6.4 Location aspect.12 6.4.1 "Installation site" designation set.12 6.4.2 "Location" designation set.13 6.5 "Document type" designation set.14 7 Application of designations.15 7.1 Combination of designation sets.15 7.2 Format of the designations.16 7.2.1 Format in the technical documents.16 7.2.2 Format in the installation.16 Annex A (informative)
Rolling stock fleet designation.17 Annex B (informative)
Examples of designation formats.18 Annex C (informative)
Relationships between the different aspects.20 Bibliography.22
List of Tables Table C.1 — Product life cycle of the railway vehicle.21
List of Figures Figure 1 — Structure and content of the "Function-oriented structure" designation set.10 Figure 2 — Structure and content of the "Product" designation set.10 Figure 3 — Structure and content of the "Object" designation set.11 Figure 4 — Structure and content of the "Installation site" designation set.12
EN 15380-1:2006 (E) 3 Figure 5 — Structure and content of the "Location" designation set.13 Figure 6 — Structure and content of the "Document type" designation set.14 Figure 7 — Combination of different designation sets.15 Figure A.1 — Example of "Railway vehicle" installation complex designation.17 Figure A.2 — Example of rolling stock fleet designation.17 Figure B.1 — Document designation in the drawing title block.18 Figure B.2 — Document designation of circuit documentation, circuit diagrams in the drawing title block.18 Figure B.3 — Document designation in the parts list title block.18 Figure B.4 — Document designation of wiring tables and
object lists in the title block.19 Figure B.5 — Document designation of technical documents.19 Figure C.1 — Relationships between the relevant standards.20
EN 15380-1:2006 (E) 4 Foreword This document (EN 15380-1:2006) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. At the request of DIN, this European Standard has been submitted to the PQ procedure and has been approved as there have been no comparable standards in Europe to date. The EN 15380 series of standards, Railway applications – Designation system for railway vehicles consists of: ¾ Part 1: General principles ¾ Part 2: Product groups ¾ Part 3: Designation of installation sites and locations This European Standard is based on Part 1 of the DIN 25002 series of standards. After approval, the text of
DIN 25002-1 submitted to the PQ procedure was brought into line with the formal requirements of an EN.
The resulting editorial amendments have led to slightly modified wordings but they have no effect on the technical content of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
EN 15380-1:2006 (E) 5 Introduction This European Standard has created a uniform, general facility for classifying railway vehicles suitable for all project viewpoints.
The following aspects are used as project viewpoints: ¾ function viewpoint and/or ¾ product viewpoint and/or ¾ location viewpoint. This standard forms the basis for:
definitions of requirements, tenders, contracts, specifications; ¾ creation of standard sub-systems; ¾ design (requirements, specifications); ¾ demarcation of areas of responsibility; ¾ product planning support; ¾ project planning support; ¾ comparison of different system solutions; ¾ maintenance and repair specifications; ¾ reliability studies, data acquisition; ¾ allocation of equipment to functions; ¾ designation of functions, products and locations . 1 Scope As a railway-specific technical standard, this European Standard specifies the designation system for technical products and technical project documentation.
It takes into account the general rules for structuring principles according to EN 61346-1 and designations according to EN 61355. The European Standard specifies the structure and content of the designation sets required in the technical project documentation. The designation depends on the aspect used, see Annex C, individually or in designation set combinations, i.e.:
product groups according to EN 15380-2; ¾
installation site/location according to EN 15380-3; ¾ function structure according to DIN 25002-5.
EN 15380-1:2006 (E) 6 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15380-2, Railway applications – Designation system for railway vehicles – Part 2: Product groups EN 15380-3:2006, Railway applications – Designation system for railway vehicles – Part 3: Designation of installation sites and locations EN 61082-1, Preparation of documents used in electrotechnology – Part 1: General requirements
Amendment A2 (IEC 61082-1:1991)
EN 61346-1, Industrial systems, installations and equipment and industrial products – Structuring principles and reference
designations - Part 1: Basic rules (IEC
61346-1:1996) EN 61346-2:2000, Industrial systems, installations and equipment and industrial products - Structuring principles and reference
designations – Part 2: Classification of objects and codes for classes
(IEC
61346-2:2000) EN 61355, Classification and designation of documents for plants, systems and equipment (IEC 61355:1997) ISO/IEC 8859-1, Information technology – 8-bit single-byte coded graphic character sets – Part 1: Latin alphabet No. 1 DIN 25002-3:2001, Railway applications – Designation system for rail vehicles –- Part 3:
Classification of documents1)
DIN 25002-5, Railway applications – Designation system for rail vehicles – Part 5: Function groups1)
1) Available from: Beuth Verlag GmbH, D-10772 Berlin
EN 15380-1:2006 (E) 7 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 61346-2:2000 and the following apply. 3.1 subclass part of a class in a designation set; combination of data positions in the designation hierarchy [EN 61346-2:2000] 3.2 installation combination of technical devices; installations can be divided into subinstallations 3.3 installation complex consists of several equivalent installations or installations working together
NOTE For the purposes of this standard, this always means the complete railway vehicle ready for operation 3.4 installation site topographic position of vehicle units, structural units and combined assemblies in a closed train composition
3.5 object smallest entity treated that is designated in a technical product that fulfils a task (e.g. lifting, lowering, measuring, controlling) together with other products.
For the purposes of this standard, this does not mean tools, clamp meters, machine tools or inventory, for example
3.6 data position position for writing down an alphabetical, numerical or special character
3.7 location information on the spatial position of an object, of a structural unit, of a technical device in a combination group, e.g. axle, driver's desk 3.8 functional assignment for railway vehicles linking of related functions between the installation complexes of a rail transport system
3.9 c
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.