SIST EN 60512-20-2:2001

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 20-2: Test 20b - Flammability tests - Fireproofness

Describes a standard test method to assess the ability of a connector to withstand specified flame and vibration during a 20 min exposure by providing specified electrical performance for the first 6 min of exposure and preventing the flame from penetrating the fireproof bulkhead on which the connector is mounted throughout the test.

Elektrisch-mechanische Bauelemente für elektronische Einrichtungen - Meß- und Prüfverfahren -- Teil 20-2: Prüfung 20b - Brennbarkeitsprüfungen - Feuerfestigkeit

Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure -- Partie 20-2: Essai 20b - Essais de risque d'incendie - Tenue au feu

Définit une méthode d'essai normalisée pour évaluer l'aptitude d'un connecteur à supporter une flamme et des vibrations spécifiées pendant une durée d'exposition de 20 minutes, sous des conditions électriques spécifiées pendant les six premières minutes d'exposition, et d'empêcher la flamme de pénétrer la traversée de cloison à l'épreuve du feu, sur laquelle le connecteur est monté du début jusqu'à la fin de l'essai.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness (IEC 60512-20-2:2000)

General Information

• Status: Published
• Publication Date: 31-Aug-2001
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 31.220.01 - Electromechanical components in general
• Technical Committee: ETC - Electrotechnical technical committe
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2001
• Due Date: 01-Sep-2001
• Completion Date: 01-Sep-2001
• Ref Project: EN 60512-20-2:2000 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness

Overview

EN 60512-20-2:2000 (IEC 60512-20-2:2000) defines a standardized test method to assess the fireproofness of electromechanical connectors mounted on a bulkhead. Commonly referenced as Test 20b – Flammability tests – Fireproofness, the standard specifies how to evaluate a connector’s ability to withstand a specified flame and concurrent vibration during a 20‑minute exposure. The objective is to verify that the connector maintains required electrical performance for the initial 6 minutes of exposure and prevents flame penetration through the fireproof bulkhead for the entire test duration.

Key Topics and Requirements

• Scope: Applies to connectors and electromechanical components used in electronic equipment where fire containment and electrical continuity under fire conditions are critical.
• Test focus:
  • Exposure to a defined flame environment combined with vibration.
  • Verification of electrical performance during the first 6 minutes of exposure.
  • Assessment of integrity of the fireproof bulkhead-no flame penetration allowed throughout the full 20‑minute test.
• Performance criteria: Ensures connector design and materials prevent through‑fire propagation and maintain electrical safety under early-stage fire conditions.
• Tested attributes: Mechanical robustness under vibration and thermal stress, retention of electrical connections, and flame containment at the mounting interface.

Applications

EN 60512-20-2 is practical for:

• Connector manufacturers validating product fire resistance and compliance.
• Test laboratories implementing standardized flammability and fireproofness test procedures.
• Product safety and compliance engineers specifying requirements for electronic equipment installed behind fireproof bulkheads.
• OEMs and system integrators in sectors where fire containment is critical - e.g., telecommunications, rail, marine, defence, building services, and industrial control systems.

Using this standard helps reduce risk of fire propagation through connector penetrations and supports certification and procurement decisions where safety under fire conditions is mandated.

Who should use this standard

• Design and R&D teams developing connectors and cable-entry solutions.
• Compliance and certification teams preparing safety documentation.
• Quality assurance and regulatory affairs professionals managing product conformity to EN/IEC standards.

Related Standards

• EN/IEC 60512 series - general basic testing procedures and measuring methods for electromechanical components.
• Other regional or industry flammability and fire‑resistance standards may be referenced alongside EN 60512‑20‑2 for system‑level fire safety assessments.

Keywords: EN 60512-20-2, IEC 60512-20-2, flammability tests, fireproofness, connector fire resistance, electromechanical components, bulkhead flame penetration, electrical performance under fire.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2001
Electromechanical components for electronic equipment - Basic testing
procedures and measuring methods - Part 20-2: Test 20b - Flammability tests -
Fireproofness (IEC 60512-20-2:2000)
Electromechanical components for electronic equipment - Basic testing procedures and
measuring methods -- Part 20-2: Test 20b - Flammability tests - Fireproofness
Elektrisch-mechanische Bauelemente für elektronische Einrichtungen - Meß- und
Prüfverfahren -- Teil 20-2: Prüfung 20b - Brennbarkeitsprüfungen - Feuerfestigkeit
Composants électromécaniques pour équipements électroniques - Procédures d'essai
de base et méthodes de mesure -- Partie 20-2: Essai 20b - Essais de risque d'incendie -
Tenue au feu
Ta slovenski standard je istoveten z: EN 60512-20-2:2000
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
31.220.01 Elektromehanske Electromechanical
komponente (sestavni deli, components in general
gradniki) na splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...