SIST EN 60684-2:1998/A2:2006

Flexible insulating sleeving -- Part 2: Methods of test

Superseded by EN 60684-2:2011

Isolierschläuche -- Teil 2: Prüfverfahren

Gaines isolantes souples -- Partie 2: Méthodes d'essai

Gibke izolacijske cevi – 2. del: Preskusne metode (IEC 60684-2:1997/A2:2005)

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2006
• Withdrawal Date: 13-Aug-2014
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: IZO - Insulating materials
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Aug-2014
• Due Date: 05-Sep-2014
• Completion Date: 14-Aug-2014
• Ref Project: EN 60684-2:1997/A2:2005 - Flexible insulating sleeving - Part 2: Methods of test

Relations

• Revised: SIST EN 60684-2:2011 - Flexible insulating sleeving - Part 2: Methods of test
• Effective Date: 06-May-2014
• Replaced By: SIST EN 60684-2:2011 - Flexible insulating sleeving - Part 2: Methods of test
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 60684-2:2011 - Flexible insulating sleeving - Part 2: Methods of test
• Effective Date: 07-Jun-2022
• Revised: SIST EN 60684-2:2011 - Flexible insulating sleeving - Part 2: Methods of test
• Effective Date: 19-Mar-2010
• Amends: SIST EN 60684-2:1998 - Flexible insulating sleeving -- Part 2: Methods of test
• Effective Date: 28-Jan-2023
• Amends: SIST EN 60684-2:1998 - Flexible insulating sleeving -- Part 2: Methods of test
• Effective Date: 21-Sep-2010
• Amends: SIST EN 60684-2:1998 - Flexible insulating sleeving -- Part 2: Methods of test
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60684-2:1998/A2:2006
01-marec-2006
Gibke izolacijske cevi – 2. del: Preskusne metode (IEC 60684-2:1997/A2:2005)
Flexible insulating sleeving -- Part 2: Methods of test
Isolierschläuche -- Teil 2: Prüfverfahren
Gaines isolantes souples -- Partie 2: Méthodes d'essai
Ta slovenski standard je istoveten z: EN 60684-2:1997/A2:2005
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60684-2:1998/A2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60684-2:1998/A2:2006

---------------------- Page: 2 ----------------------

SIST EN 60684-2:1998/A2:2006
EUROPEAN STANDARD EN 60684-2/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2005

ICS 29.035.20


English version


Flexible insulating sleeving
Part 2: Methods of test
(IEC 60684-2:1997/A2:2005)


Gaines isolantes souples Isolierschläuche
Partie 2: Méthodes d'essai Teil 2: Prüfverfahren
(CEI 60684-2:1997/A2:2005) (IEC 60684-2:1997/A2:2005)






This amendment A2 modifies the European Standard EN 60684-2:1997; it was approved by CENELEC
on 2005-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60684-2:1997/A2:2005 E

---------------------- Page: 3 ----------------------

SIST EN 60684-2:1998/A2:2006
EN 60684-2:1997/A2:2005 - 2 -
Foreword
The text of document 15/224/FDIS, future amendment 2 to IEC 60684-2:1997, prepared by
IEC TC 15, Standards on specifications for electrical insulating materials, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 60684-2:1997
on 2005-12-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2006-09-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-12-01
__________
Endorsement notice
The text of amendment 2:2005 to the International Standard IEC 60684-2:1997 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60684-2:1998/A2:2006


INTERNATIONAL IEC


STANDARD 60684-2


  1997



AMENDMENT 2

2005-11

Amendment 2
Flexible insulating sleeving –
Part 2:
Methods of test
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale M

International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST EN 60684-2:1998/A2:2006
– 2 – 60684-2 Amend. 2  IEC:2005(E)
FOREWORD
This amendment has been prepared by IEC technical committee 15: Standards on
specifications for electrical Insulating materials.
The text of this amendment is based on the following documents:
FDIS Report on voting
15/224/FDIS 15/255/RVD

Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

___________

Page 5
CONTENTS
Add the following new clauses:
51 Dynamic shear at ambient temperature
52 Dynamic shear at elevated temperature
53 Dynamic shear after heat shock and heat ageing
54 Rolling drum peel to aluminium
55 Aluminium rod dynamic shear
56 Sealing
57 Adhesive T peel strength of two bonded heat-shrinkable substrates

Page 113
Add after Clause 50, introduced in Amendment 1, the following new Clauses 51 through 57:
51 Dynamic shear at ambient temperature
51.1 Principle
This test is designed to evaluate the strength of dual wall sleevings under shear conditions
when bonded to an aluminium substrate.

---------------------- Page: 6 ----------------------

SIST EN 60684-2:1998/A2:2006
60684-2 Amend. 2  IEC:2005(E) – 3 –
51.2 Apparatus
Aluminium strips (100 ± 5) mm x (25 ± 1) mm x (0,9 ± 0,1) mm.
Degreasing solvent: 2-Butanone (methyl ethyl ketone)
Specimen assembly fixture (see Figure 16)
Silicone release paper
320 grit abrasive
Tensile test machine
Oven (for method 52, dynamic shear at elevated temperature)
Weight and Mass 1,4 kg ± 0,1 kg.
Suitable weight to flatten specimens.
51.3 Form and number of test specimens
Three test specimens shall be prepared. Three strips of aluminium shall be abraded and
degreased on one side on a length of at least 20 mm from one end. Three lengths of sleeving
at least 120 mm long shall be recovered in an oven for the time and temperature as specified
in IEC 60684-3. Immediately after removal the sleeving shall be cut open longitudinally and laid
flat on the silicone release paper, with the inside coated surface in contact with the silicone
paper. A weight of sufficient mass to keep the specimens flat shall be placed on top.
This assembly shall be allowed to cool to room temperature before the weight is removed. Any
other suitable method for flattening the sleeving may be used.
The three specimens of the sleevings shall be finally cut longitudinally (100 ± 5) mm ×
(25 ± 1) mm.
The aluminium strips and cut sleeving specimens shall be assembled as shown in Figure 16,
with the coated surface of the sleeving in contact with the abraded surface of the aluminium,
overlapped between 12,5 mm and 14,2 mm. The weight with mass 1,4 kg shall be
preconditioned in an oven for at least 1 h at the assembly conditioning temperature as
specified in IEC 60684-3. The whole assembly, as shown in Figure 16, shall be placed in an
oven for the time and temperature as specified in IEC 60684-3. The assembly shall then be
removed from the oven and allowed to cool to room temperature before the weight is removed.
51.4 Procedure
Insert the specimen in the tensile test machine by clamping at least 25 mm of the aluminum
strip in the top jaw and at least 25 mm of the sleeving in the bottom jaw. The rate of jaw
separation shall be (50 ± 5) mm/min. Record the maximum load for each specimen.
51.5 Result
The result shall be the mean of the three maximum loads.

---------------------- Page: 7 ----------------------

SIST EN 60684-2:1998/A2:2006
– 4 – 60684-2 Amend. 2  IEC:2005(E)
Dimensions in millimetres

Top view of weight
35 nominal
25 nominal
Side view (showing
Weight of Mass 1,4 kg ± 0,1 kg
assembly of each
specimen)
Release paper
Coated sleeving
Coated surface
Aluminium strip
Area of abraded
surface
Weight guides
Fully assembled side view
Aluminium strip
Coated sleeving
Test specimens
Top view of fixture without assemblies,
showing typical design of weight guides
Weight guide
Bottom plate
IEC  1839/05

Figure 16 – Assembly and fixture for dynamic shear at ambient temperature

---------------------- Page: 8 ----------------------

SIST EN 60684-2:1998/A2:2006
60684-2 Amend. 2  IEC:2005(E) – 5 –
52 Dynamic shear at elevated temperature
The test specimens shall be prepared in accordance with 51.3.
The procedure shall be in accordance with 51.4 except that the test is performed in an oven
mounted in the tensile test machine. The test specimens shall be pre-conditioned in the test
oven and at the temperature of test for at least 30 min. The test temperatures shall be as
specified in IEC 60684-3.
53 Dynamic shear after heat shock and heat ageing
The test specimens shall be prepared in accordance with 51.3.
The test specimens shall be sandwiched between two PTFE or PTFE coated aluminium plates
as shown in Figure 17 with the bolts just sufficiently tight enough to ensure the specimens
remain flat during the heat shock or heat ageing periods. The assembly shall be conditioned in
an oven for the time and temperature specified in IEC 60684-3. The test specimen shall be
removed from the oven and allowed to cool to room temperature before they are removed from
the aluminum plates.
The test specimens shall then be tested in accordance with 51.4.
Dimensions in millimetres

50
Bolts
Test specimen
PTFE or PTFE
coated aluminium
plates
120
PTFE or PTFE
coated aluminium
Coated sleeving
plates
Aluminium strip
Coated surface
IEC  1840/05


NOTE Dimensions are nominal unless otherwise specified.
Figure 17 – Assembly for heat shock and heat ageing

---------------------- Page: 9 ----------------------

SIST EN 60684-2:1998/A2:2006
– 6 – 60684-2 Amend. 2  IEC:2005(E)
54 Rolling drum peel to aluminium
54.1 Principle
This
...