SIST EN ISO 10819:2013/A1:2019

Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/Amd 1:2019)

Mechanische Schwingungen und Stöße - Hand-Arm-Schwingungen - Messung und Bewertung der Schwingungsübertragung von Handschuhen in der Handfläche - Änderung 1 (ISO 10819:2013/Amd 1:2019)

Vibrations et chocs mécaniques - Vibrations main-bras - Mesurage et évaluation du facteur de transmission des vibrations par les gants à la paume de la main - Amendement 1 (ISO 10819:2013/Amd 1:2019)

ISO 10819:2013 specifies a method for the laboratory measurement, data analysis, and reporting of the vibration transmissibility of a glove with a vibration-reducing material that covers the palm, fingers, and thumb of the hand. ISO 10819:2013 specifies vibration transmissibility in terms of vibration transmitted from a handle through a glove to the palm of the hand in one-third-octave frequency bands with centre frequencies of 25 Hz to 1 250 Hz.

Mehanske vibracije in udarci - Vibracije dlan-roka - Merjenje in vrednotenje prenosov vibracij z rokavice na dlan roke - Dopolnilo A1 (ISO 10819:2013/Amd 1:2019)

General Information

• Status: Published
• Public Enquiry End Date: 19-Nov-2017
• Publication Date: 24-Feb-2019
• ICS: 13.160 - Vibration and shock with respect to human beings
• ICS: 13.340.40 - Hand and arm protection
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Feb-2019
• Due Date: 28-Apr-2019
• Completion Date: 25-Feb-2019
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Mandate: M/BC/CEN/90/2 - Order for standardization concerning Personal Protective Equipment (P.P.E.)
• Ref Project: EN ISO 10819:2013/A1:2019 - Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/Amd 1:2019)

Relations

• Amends: SIST EN ISO 10819:2013 - Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)
• Effective Date: 29-Sep-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10819:2013/A1:2019
01-april-2019
Mehanske vibracije in udarci - Vibracije dlan-roka - Merjenje in vrednotenje
prenosov vibracij z rokavice na dlan roke - Dopolnilo A1 (ISO 10819:2013/Amd
1:2019)
Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of
the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO
10819:2013/Amd 1:2019)
Mechanische Schwingungen und Stöße - Hand-Arm-Schwingungen - Messung und
Bewertung der Schwingungsübertragung von Handschuhen in der Handfläche -
Änderung 1 (ISO 10819:2013/Amd 1:2019)
Vibrations et chocs mécaniques - Vibrations main-bras - Mesurage et évaluation du
facteur de transmission des vibrations par les gants à la paume de la main -
Amendement 1 (ISO 10819:2013/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 10819:2013/A1:2019
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
13.340.40 Varovanje dlani in rok Hand and arm protection
SIST EN ISO 10819:2013/A1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10819:2013/A1:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 10819:2013/A1:2019


EN ISO 10819:2013/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2019
EUROPÄISCHE NORM
ICS 13.340.40; 13.160
English Version

Mechanical vibration and shock - Hand-arm vibration -
Measurement and evaluation of the vibration
transmissibility of gloves at the palm of the hand -
Amendment 1 (ISO 10819:2013/Amd 1:2019)
Vibrations et chocs mécaniques - Vibrations main-bras Mechanische Schwingungen und Stöße - Hand-Arm-
- Mesurage et évaluation du facteur de transmission Schwingungen - Messung und Bewertung der
des vibrations par les gants à la paume de la main - Schwingungsübertragung von Handschuhen in der
Amendement 1 (ISO 10819:2013/Amd 1:2019) Handfläche - Änderung 1 (ISO 10819:2013/Amd
1:2019)
This amendment A1 modifies the European Standard EN ISO 10819:2013; it was approved by CEN on 5 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10819:2013/A1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10819:2013/A1:2019
EN ISO 10819:2013/A1:2019 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
health and safety requirements of Regulation (EU) 2016/425 aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10819:2013/A1:2019
EN ISO 10819:2013/A1:2019 (E)
European foreword
This document (EN ISO 10819:2013/A1:2019) has been prepared by Technical Committee ISO/TC 108
"Mechanical vibration, shock and condition monitoring" in collaboration with Technical Committee
CEN/TC 231 “Mechanical vibration and shock” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2019, and conflicting national standards shall
be withdrawn at the latest by August 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10819:2013/Amd 1:2019 has been approved by CEN as EN ISO 10819:2013/A1:2019
without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10819:2013/A1:2019
EN ISO 10819:2013/A1:2019 (E)
Annex ZA
(informative)
Relationship between this European Standard and the essential health and
safety requirements of Regulation (EU) 2016/425 aimed to be covered
This European Standard has been prepared under a Commission’s standardization request to provide
one voluntary means of conforming to essential health and safety requirements of Regulation (EU)
2016/425 of the European parliament and of the council of 9 March 2016 on personal protective
equipment.
Once this standard is cited in the Official Journal of the European Union under that Regulation,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential health and
safety requirements of that Regulation, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex II of Regulation (EU)
2016/425
Essential health and safety
requirements of Clauses of this EN Remarks/Notes
Regulation (EU) 2016/425
Clause 9, Clause 10 and None.
3.1.3. Mechanical vibration
Annex B.

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
4

---------------------- Page: 6 ----------------------

SIST EN ISO 10819:2013/A1:2019
INTERNATIONAL ISO
STANDARD 10819
Second edition
2013-07-15
AMENDMENT 1
2019-01
Mechanical vibration and shock —
Hand-arm vibration — Measurement
and evaluation of the vibration
transmissibility of gloves at the palm
of the hand
AMENDMENT 1
Vibrations et chocs mécaniques — Vibrations main-bras — Mesurage
et évaluation du facteur de transmission des vibrations par les gants à
la paume de la main
AMENDEMENT 1
Reference number
ISO 10819:2013/Amd.1:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------

SIST EN ISO 10819:2013/A1:2019
ISO 10819:2013/Amd.1:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10819:2013/A1:2019
ISO 10819:2013/Amd.1:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC)
...