SIST EN ISO 6410-3:2021
(Main)Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:2021)
Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:2021)
This document establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in ISO 6410-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see ISO 6410-1), for example in assembly drawings.
Technische Zeichnungen - Gewinde und Gewindeteile - Teil 3: Vereinfachte Darstellung (ISO 6410-3:2021)
Dieses Dokument legt Regeln für die vereinfachte Darstellung von Gewindeteilen fest, mit Ausnahme von Gewindeeinsätzen, die in ISO 6410 2 beschrieben sind. Diese Darstellung ist anwendbar, wenn es nicht notwendig ist, die genaue Form und Einzelheiten der Teile darzustellen (siehe ISO 6410 1), z. B. in Zusammenbauzeichnungen.
Dessins techniques - Filetages et pièces filetées - Partie 3: Représentation simplifiée (ISO 6410-3:2021)
Le présent document établit des règles pour la représentation simplifiée des pièces filetées, à l'exception des inserts filetés qui font l'objet de l'ISO 6410-2. Cette représentation s'applique dans le cas où il n'est pas nécessaire de montrer la forme exacte et le détail des pièces (voir ISO 6410-1), par exemple dans les dessins d'assemblage.
Tehniške risbe - Navoji in deli z navojem - 3. del: Poenostavljeno prikazovanje (ISO 6410-3:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 6410-3:2021
01-junij-2021
Nadomešča:
SIST EN ISO 6410-3:2001
Tehniške risbe - Navoji in deli z navojem - 3. del: Poenostavljeno prikazovanje (ISO
6410-3:2021)
Technical drawings - Screw threads and threaded parts - Part 3: Simplified
representation (ISO 6410-3:2021)
Technische Zeichnungen - Gewinde und Gewindeteile - Teil 3: Vereinfachte Darstellung
(ISO 6410-3:2021)
Dessins techniques - Filetages et pièces filetées - Partie 3: Représentation simplifiée
(ISO 6410-3:2021)
Ta slovenski standard je istoveten z: EN ISO 6410-3:2021
ICS:
01.100.20 Konstrukcijske risbe Mechanical engineering
drawings
21.040.01 Navoji na splošno Screw threads in general
SIST EN ISO 6410-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6410-3:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 6410-3:2021
EN ISO 6410-3
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2021
EUROPÄISCHE NORM
ICS 01.100.20; 21.040.01 Supersedes EN ISO 6410-3:1996
English Version
Technical drawings - Screw threads and threaded parts -
Part 3: Simplified representation (ISO 6410-3:2021)
Dessins techniques - Filetages et pièces filetées - Partie Technische Zeichnungen - Gewinde und Gewindeteile -
3: Représentation simplifiée (ISO 6410-3:2021) Teil 3: Vereinfachte Darstellung (ISO 6410-3:2021)
This European Standard was approved by CEN on 11 March 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6410-3:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6410-3:2021
EN ISO 6410-3:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6410-3:2021
EN ISO 6410-3:2021 (E)
European foreword
This document (EN ISO 6410-3:2021) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2021, and conflicting national standards shall
be withdrawn at the latest by October 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6410-3:1996.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 6410-3:2021 has been approved by CEN as EN ISO 6410-3:2021 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 6410-3:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 6410-3:2021
INTERNATIONAL ISO
STANDARD 6410-3
Second edition
2021-03
Technical drawings — Screw threads
and threaded parts —
Part 3:
Simplified representation
Dessins techniques — Filetages et pièces filetées —
Partie 3: Représentation simplifiée
Reference number
ISO 6410-3:2021(E)
©
ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 6410-3:2021
ISO 6410-3:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 6410-3:2021
ISO 6410-3:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Simplified representation . 1
4.1 General . 1
4.2 Screws and nuts . 1
4.3 Small diameter threads .
...
SLOVENSKI STANDARD
oSIST prEN ISO 6410-3:2021
01-januar-2021
Tehniške risbe - Navoji in deli z navojem - 3. del: Poenostavljeno prikazovanje
(ISO/FDIS 6410-3:2020)
Technical drawings - Screw threads and threaded parts - Part 3: Simplified
representation (ISO/FDIS 6410-3:2020)
Technische Zeichnungen - Gewinde und Gewindeteile - Teil 3: Vereinfachte Darstellung
(ISO/FDIS 6410-3:2020)
Dessins techniques - Filetages et pièces filetées - Partie 3: Représentation simplifiée
(ISO/FDIS 6410-3:2020)
Ta slovenski standard je istoveten z: prEN ISO 6410-3
ICS:
01.100.20 Konstrukcijske risbe Mechanical engineering
drawings
21.040.01 Navoji na splošno Screw threads in general
oSIST prEN ISO 6410-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 6410-3:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 6410-3:2021
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 6410-3
ISO/TC 10/SC 6
Technical drawings — Screw threads
Secretariat: SAC
and threaded parts —
Voting begins on:
2020-11-18
Part 3:
Voting terminates on:
Simplified representation
2021-02-10
Dessins techniques — Filetages et pièces filetées —
Partie 3: Représentation simplifiée
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 6410-3:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 6410-3:2021
ISO/FDIS 6410-3:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 6410-3:2021
ISO/FDIS 6410-3:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Simplified representation . 1
4.1 General . 1
4.2 Screws and nuts . 1
4.3 Small diameter threads . 2
Bibliography . 4
© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 6410-3:2021
ISO/FDIS 6410-3:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.