iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13701:2002

(Main)

Space systems - Glossary of terms

Space systems - Glossary of terms

This European Standard contains the definition of all common terms used in European space standards. Terms specific to a particular space standard are defined in that standard.

Raumfahrttechnik - Glossar

Dieses Dokument enthält die Definition der gebräuchlichsten Fachausdrücke, die im europäischen Raumfahrtnormenwerk benutzt werden. Fachausdrücke, die für eine Raumfahrtnorm spezifisch sind, werden in dieser Norm definiert.

Systeme spatiale - Vocabulaire

Le présent document passe en revue la définition des termes utilisés dans les normes spatiales européennes. Les termes propres a une norme spatiale particuliere sont définis dans la norme en question.

Space systems - Glossary of terms

General Information

Status
Withdrawn
Publication Date
31-Dec-2001
Withdrawal Date
04-Mar-2015
ICS
01.040.49 - Aircraft and space vehicle engineering (Vocabularies)
49.140 - Space systems and operations
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
04-Mar-2015
Due Date
27-Mar-2015
Completion Date
05-Mar-2015
Mandate
M/237 - Mandate to CEN, CENELEC and ETSI for standardization in the field of equipment for the space industry
Ref Project
EN 13701:2001 - Space systems - Glossary of terms

Relations

Replaced By
SIST EN 16601-00-01:2015 - Space systems - Glossary of terms
Effective Date
01-Apr-2015

Buy Standard

EN 13701:2002EN 13701:2002
PreviousNext
Standard
EN 13701:2002
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Space systems - Glossary of termsRaumfahrttechnik - GlossarSysteme spatiale - VocabulaireSpace systems - Glossary of terms49.140Vesoljski sistemi in operacijeSpace systems and operations01.040.49Letalska in vesoljska tehnika (Slovarji)Aircraft and space vehicle engineering (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13701:2001SIST EN 13701:2002en01-januar-2002SIST EN 13701:2002SLOVENSKI
STANDARD



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



SIST EN 13701:2002



...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TP CEN/TR 17603-32-08:2022(Main)
Space engineering - Structural materials handbook - Part 8: Glossary
CEN/TR 17603-32-08:2022

The structural materials handbook, SMH, combines materials and design information on established polymer matrix composites with provisional information on the emerging groups of newer advanced materials and their composites. Design aspects are described, along with factors associated with joining and manufacturing. Where possible, these are illustrated by examples or case studies.
The Structural materials handbook contains 8 Parts.
A glossary of terms, definitions and abbreviated terms for these handbooks is contained in Part 8.
The parts are as follows:
Part 1 Overview and material properties and applications                    Clauses 1 ‐ 9
Part 2 Design calculation methods and general design aspects    Clauses 10 ‐ 22
Part 3 Load transfer and design of joints and design of structures    Clauses 23 ‐ 32
Part 4 Integrity control, verification guidelines and manufacturing    Clauses 33 ‐ 45
Part 5 New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints    Clauses 46 ‐ 63
Part 6 Fracture and material modelling, case studies and design and integrity control and inspection    Clauses 64 ‐ 81
Part 7 Thermal and environmental integrity, manufacturing aspects, in‐orbit and health monitoring, soft materials, hybrid materials and nanotechnoligies   Clauses 82 ‐ 107
Part 8 Glossary   
NOTE: The 8 parts will be numbered TR17603-32-01 to TR 17603-32-08

  • Technical report
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16603-60-20:2020(Main)
Space engineering - Star sensor terminology and performance specification
EN 16603-60-20:2020

This Standard specifies star sensor performances as part of a space project. The Standard covers all aspects of performances, including nomenclature, definitions, and performance requirements for the performance specification of star sensors.
The Standard focuses on:
- performance specifications (including the impact of temperature, radiation and straylight environments);
- robustness (ability to maintain functionalities under non nominal environmental conditions).
Other specification types, for example mass and power, housekeeping data and data structures, are outside the scope of this Standard.
This Standard also proposes a standard core of functional interfaces defined by unit suppliers and avionics primes in the context of Space AVionics Open Interface aRchitecture (SAVOIR) initiative.
When viewed from the perspective of a specific project context, the requirements defined in this Standard should be tailored to match the genuine requirements of a particular profile and circumstances of a project.
This standard may be tailored for the specific characteristics and constraints of a space project in conformance with ECSS-S-ST-00.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16603-60-21:2018(Main)
Space engineering - Gyros terminology and performance specification
EN 16603-60-21:2018

This Standard specifies gyros functions and performances as part of a space project. This Standard covers aspects of functional and performance requirements, including nomenclature, definitions, functions and performance metrics for the performance specification of spaceborne gyros.
The Standard focuses on functional and performance specifications with the exclusion of mass and power, TM/TC interface and data structures.
When viewed from the perspective of a specific project context, the requirements defined in this Standard can be tailored to match the genuine requirements of a particular profile and circumstances of a project.
The requirements verification by test can be performed at qualification level only or also at acceptance level. It is up to the Supplier, in agreement with the customer, to define the relevant verification approach in the frame of a specific procurement, in accordance with clause 5.2 of ECSS-E-ST-10-02.
The present standard does not cover gyro use for launch vehicles.
This standard can be tailored for the specific characteristics and constraints of a space project in conformance with ECSS-S-ST-00.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16601-00-01:2015(Main)
Space systems - Glossary of terms
EN 16601-00-01:2015

This document controls the definition of all common terms used in the European Cooperation for Space Standardization (ECSS) Standards System. Terms specific to a particular ECSS Standard are defined in that standard.
This document does not include the definition of terms used with their common meaning. In this case, the definition from the Oxford English Dictionary applies.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 16486-7:2023(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023)
CEN ISO/TS 16486-7:2023

This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1    A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2    If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a)    a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b)    an operating temperature of 20 °C as the reference temperature.
NOTE 3    For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4    It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 406-2 V3.1.1:2023(Main)
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR
ETSI EN 301 406-2 V3.1.1 (2023-08)

DEN/DECT-00359-2

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    76 pages
    English language
    sale 15% off
  • Standard
    76 pages
    English language
    sale 15% off
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60061-3:2000/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969/AMD59:2023)
EN 60061-3:1993/A59:2023
  • Amendment
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16186-5:2021+A1:2023(Main + Amendment)
Railway applications - Driver's cabs - Part 5: External visibility for tram vehicles
EN 16186-5:2021+A1:2023

This document specifies the external front and rear visibility conditions from cabs of tram
vehicles and the associated assessment method.
This document applies to vehicles operating on tram networks.
This document does not apply to driver's auxiliary desks.
This standard is not intended to be applied for tram train.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60061-2:1999/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/AMD59:2023)
EN 60061-2:1993/A59:2023
  • Amendment
    19 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023/A1:2023(Amendment)
Amendment 1: International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017/AMD1:2021
  • Standard
    3 pages
    English and French language
    sale 15% off
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day