oSIST prEN ISO 16032:2023

Acoustics - Measurement of sound pressure level from service equipment or activities in buildings - Engineering method (ISO/DIS 16032:2023)

ISO 16032:2004 specifies methods for measuring the sound-pressure level produced by service equipment attached to or installed in buildings. It specifically covers measurements on sanitary installations, mechanical ventilation, heating and cooling service equipment, lifts, rubbish chutes, boilers, blowers, pumps and other auxiliary service equipment, and motor-driven car park doors, but can also be applied to other equipment attached to or installed in buildings.
The methods are suitable for rooms with volumes of approximately 300 cubic metres or less in e.g. dwellings, hotels, schools, offices and hospitals. The standard is not in general intended for measurements in large auditoria such as concert halls. However, the operating conditions and operating cycles in Annex B can be used in such cases.
The service equipment sound-pressure level is determined as the maximum A-weighted and optionally C-weighted sound-pressure level occurring during a specified operation cycle of the service equipment under test, or as the equivalent continuous sound-pressure level determined with a specified integration time. A-weighted and C-weighted values are calculated from octave-band measurements.

Akustik - Messung des Schalldruckpegels von haustechnischen Anlagen oder Aktivitäten in Gebäuden - Standardverfahren (ISO/DIS 16032:2023)

Dieses Dokument legt ein Standardverfahren zur Messung der von in dem Gebäude eingebauten haustechnischen Anlagen ausgehenden Schalldruckpegel in Räumen fest.
Dieses Dokument behandelt insbesondere Messungen des von Sanitäranlagen, haustechnischen maschinellen Lüftungs , Heizungs  und Kühlanlagen, Aufzügen, Müllabwurfschächten, Heizgeräten, Gebläsen, Pumpen und anderen haustechnischen Zusatzausrüstungen und motorbetriebenen Garagentoren ausgehenden Schalls. Es kann auch auf die Messung von Schall, der von anderen Anlagenarten oder Aktivitäten in dem Gebäude erzeugt wird, z. B. von Sporteinrichtungen oder Restaurants ausgehender Schall, angewendet werden.
Die Messung von Geräuschen äußerer Schallquellen, die Luft  oder Bodenschall in dem Gebäude erzeugen, ist in dieser Norm nicht enthalten.
Die Verfahren sind für Räume geeignet, deren Volumen etwa 300 m3 oder weniger beträgt, beispielsweise Räume in Wohnhäusern, Hotels, Schulen, Büros und Krankenhäusern.
Die Verfahren sind nicht für Messungen in großen Hörsälen oder Konzerthallen bestimmt.

Acoustique - Mesurage du niveau de pression acoustique des équipements techniques ou activités dans les bâtiments - Méthode d'expertise (ISO/DIS 16032:2023)

Akustika - Merjenje ravni zvočnega tlaka obratovalne opreme ali aktivnosti v stavbah - Inženirska metoda (ISO/DIS 16032:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 12-Jul-2023
• ICS: 17.140.20 - Noise emitted by machines and equipment
• ICS: 91.120.20 - Acoustics in building. Sound insulation
• ICS: 91.140.01 - Installations in buildings in general
• Technical Committee: AKU - Acoustics
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 19-Dec-2023
• Due Date: 06-Feb-2024
• Ref Project: FprEN ISO 16032 - Acoustics - Measurement of sound pressure level from service equipment or activities in buildings - Engineering method (ISO/FDIS 16032:2023)

Relations

• Revises: SIST EN ISO 16032:2005 - Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004)
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16032:2023
01-julij-2023
Akustika - Merjenje ravni zvočnega tlaka obratovalne opreme ali aktivnosti v
stavbah - Inženirska metoda (ISO/DIS 16032:2023)
Acoustics - Measurement of sound pressure level from service equipment or activities in
buildings - Engineering method (ISO/DIS 16032:2023)
Akustik - Messung des Schalldruckpegels von haustechnischen Anlagen oder Aktivitäten
in Gebäuden - Standardverfahren (ISO/DIS 16032:2023)
Acoustique - Mesurage du niveau de pression acoustique des équipements techniques
ou activités dans les bâtiments - Méthode d'expertise (ISO/DIS 16032:2023)
Ta slovenski standard je istoveten z: prEN ISO 16032
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
91.120.20 Akustika v stavbah. Zvočna Acoustics in building. Sound
izolacija insulation
oSIST prEN ISO 16032:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16032:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16032:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16032
ISO/TC 43/SC 2 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-04-20 2023-07-13
Acoustics — Measurement of sound pressure level from
service equipment or activities in buildings — Engineering
method
ICS: 91.140.01; 91.120.20; 17.140.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16032:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16032:2023
ISO/DIS 16032:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16032
ISO/TC 43/SC 2 Secretariat: DIN
Voting begins on: Voting terminates on:

Acoustics — Measurement of sound pressure level from
service equipment or activities in buildings — Engineering
method
ICS: 91.140.01; 91.120.20; 17.140.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 16032:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16032:2023
ISO/DIS 16032:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
...