iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13798:2002

(Main)

Hydrometry - Specification for a reference raingauge pit

Hydrometry - Specification for a reference raingauge pit

This Standard specifies the design of a reference raingauge pit. The specified details of the pit and the grating, are purposely kept to a minimum in order to allow each raingauge operator latitude in their construction and to suit local conditions.

Hydrometrie - Spezifikation für eine Grube für Referenz-Regenmesser

Diese Norm beschreibt die Konstruktion einer Grube für Referenzregenmesser. Die vorgegebenen Einzelheiten für Grube und Gitterrost sind aus Gründen der Zweckmäßigkeit nicht umfangreich, um jedem Benutzer eines Regenmessers Spielraum beim Bau entsprechend den örtlichen Bedingungen zu lassen.

Hydrométrie - Spécification pour une fosse de référence d'installation d'un pluviometre

La présente Norme européenne décrit les principes d'une fosse de référence pour l'installation d'un pluviomètre. La fosse et son caillebotis sont volontairement peu détaillés pour laisser toute la latitude possible aux exploitants de réseaux pluviométriques dans leurs installations et s'adapter au mieux aux conditions locales.

Hidrometrija – Specifikacija za referenčni dežemer

General Information

Status
Withdrawn
Publication Date
30-Nov-2002
Withdrawal Date
01-Jul-2010
ICS
07.060 - Geology. Meteorology. Hydrology
17.120.01 - Measurement of fluid flow in general
Technical Committee
IMIN - Measurement instruments
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2010
Due Date
24-Jul-2010
Completion Date
02-Jul-2010
Ref Project
EN 13798:2002 - Hydrometry - Specification for a reference raingauge pit

Relations

Replaced By
SIST EN 13798:2010 - Hydrometry - Specification for a reference raingauge pit
Effective Date
01-Sep-2010

Buy Standard

EN 13798:2002EN 13798:2002
PreviousNext
Standard
EN 13798:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hydrometrie - Spezifikation für eine Grube für Referenz-RegenmesserHydrométrie - Spécification pour une fosse de référence d'installation d'un pluviometreHydrometry - Specification for a reference raingauge pit17.120.01VSORãQRMeasurement of fluid flow in general07.060Geologija. Meteorologija. HidrologijaGeology. Meteorology. HydrologyICS:Ta slovenski standard je istoveten z:EN 13798:2002SIST EN 13798:2002en01-december-2002SIST EN 13798:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13798October 2002ICS 07.060English versionHydrometry - Specification for a reference raingauge pitHydrométrie - Spécification pour une fosse de référenced'installation d'un pluviomètreHydrometrie - Spezifikation für eine Grube für Referenz-RegenmesserThis European Standard was approved by CEN on 30 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13798:2002 ESIST EN 13798:2002
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13798:2010(Main)
Hydrometry - Specification for a reference raingauge pit
EN 13798:2010

This European Standard specifies the design of a reference raingauge pit. The reference raingauge pit is designed for the liquid precipitation only. The specified details of the pit and the grating, are purposely kept to a minimum in order to allow each raingauge operator latitude in their construction and to suit local conditions.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13798:2010(Main)
Hydrometry - Specification for a reference raingauge pit
EN 13798:2010

This European Standard specifies the design of a reference raingauge pit. The reference raingauge pit is designed for the liquid precipitation only. The specified details of the pit and the grating, are purposely kept to a minimum in order to allow each raingauge operator latitude in their construction and to suit local conditions.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 488-2:2025(Main)
District heating and district cooling pipes - Bonded pipe systems for directly buried hot and cold water networks - Factory made steel valve assembly for draining and venting, polyurethane thermal insulation and a casing of polyethylene
EN 488-2:2025

This document specifies requirements for factory made thermally insulated bonded steel service valve assemblies for filling, draining, venting and operation purposes for directly buried hot and cold water networks in accordance with EN 13941-1, comprising a steel service valve, steel service pipe, polyurethane (PUR) foam thermal insulation and a casing of polyethylene (PE).
This document applies of steel service valve assemblies with an internal pressure of maximum 2,5 MPa.
The principles of this document can be applied to thermal insulated bonded steel service valve assemblies with internal pressures higher than 2,5 MPa, provided that special attention is paid to the effects of pressure.
The steel service valve assembly can also include the following additional elements: measuring wires, spacers, and diffusion barriers.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15698-2:2025(Main)
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
EN 15698-2:2025

This document specifies requirements and test methods for fitting and steel valve assemblies of factory made thermally insulated bonded twin pipe assemblies for hot water networks in accordance with EN 13941-1, comprising two steel service pipes, in most cases steel fittings and/or steel valves, steel components, polyurethane (PUR) foam thermal insulation and one casing of polyethylene.
NOTE   Steel components can be e.g. fixing bars.
The twin pipe assembly can also include the following additional elements: measuring wires, spacers and diffusion barriers.
This document covers the following assemblies:
-   fittings: bends, T-pieces and reducers;
-   valves for main line.
This document applies to fitting assemblies with an internal pressure of at least 1,6 MPa and steel valve assemblies with a maximum internal pressure of 2,5 MPa.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-8:2025(Main)
Safety of packaging machines - Part 8: Strapping machines
EN 415-8:2025

This document is applicable to the following groups of machines:
-   powered hand strapping tools;
-   semi-automatic strapping machines;
-   automatic strapping machines.
This document does not apply to:
-   strapping tools, where the strap tension is only applied by manual effort;
-   machines, intended for use with paper strap;
-   hand-held motor-operated electric strapping tools.
NOTE   For hand-held motor-operated electric strapping tools see EN 60745-2-18:2009 and EN 62841-1:2015.
This document deals with safety requirements for machine design, transport, installation, commissioning, operation, adjustment, maintenance and cleaning. The extent to which hazards, hazardous situations and events are covered is indicated in Annex A.
This document does not consider the following hazards:
-   the use of strapping machines in potentially explosive atmosphere;
-   the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject;
-   hazards that are associated with decommissioning strapping machines.
Hazards associated with decommissioning of strapping machines are not considered and therefore excluded but are generally part of the instruction manual (see Clause 6), together with suited measures, if necessary.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3155-009:2025(Main)
Aerospace Series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
EN 3155-009:2025

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-008.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13757-7:2025(Main)
Communication systems for meters - Part 7: Transport and security services
EN 13757-7:2025

This document specifies transport and security services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies secure communication capabilities by design and supports the building of a secure system architecture.
This document is applicable to the protection of consumer data to ensure privacy.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO/IEC 27555:2025(Main)
Information security, cybersecurity and privacy protection - Guidelines on personally identifiable information deletion (ISO/IEC 27555:2021)
EN ISO/IEC 27555:2025

The standard contains guidelines for developing and establishing policies and procedures for deletion
of PII in organizations by specifying:
—   a harmonized terminology for PII deletion;
—   an approach for defining deletion rules in an efficient way;
—   a description of required documentation; and
—   a broad definition of roles, responsibilities and processes.
This document is intended to be used by organizations where PII are stored or processed.
This document does not address:
—   specific legal provision, as given by national law or specified in contracts;
—   specific deletion rules for particular clusters of PII as are to be defined by PII controllers for
—   processing PII;
—   deletion mechanisms;
—   reliability, security and suitability of deletion mechanisms;
—   specific techniques for de-identification of data.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9038:2025(Main)
Determination of sustained combustibility of liquids (ISO 9038:2025)
EN ISO 9038:2025

This document specifies a procedure, at temperatures up to 100 °C, to determine whether a liquid product, that would be classified as “flammable” by virtue of its flash point, sustains combustion at the temperature(s) specified, for example, in regulations.
NOTE            Many national and international regulations classify liquids as presenting a flammable hazard based on their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot “sustain combustion” at some specified temperature(s).
The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, that have a flash point. It is not applicable to painted surfaces in respect of assessing their potential fire hazards.
This test method is applicable, in addition to test methods for flash point, for assessing the fire hazard of a product.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-41:2025(Main)
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
EN 81-41:2024

1.1   This draft European Standard deals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically powered vertical lifting platforms affixed to a building structure intended for use by persons with impaired mobility:
-   travelling vertically between predefined levels along a guided path whose inclination to the vertical does not exceed 15°;
-   intended for use by persons with or without a wheelchair;
-   supported or sustained by rack and pinion, rope traction drive, noncircular elastomeric-coated steel suspension members (hereafter called flat belt) traction drive, rope positive drive, chains, toothed belts, screw and nut, guided chain, scissors mechanism or hydraulic jack (direct or indirect);
-   with enclosed liftways;
-   with a speed not greater than 0,15 m/s;
-   with platforms where the carrier is not completely enclosed.
1.2   This draft European Standard deals with all significant hazards relevant to lifting platforms, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
1.3   This draft European Standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   handling of materials, the nature of which could lead to dangerous situations;
-   vertical lifting platforms whose primary function is the transportation of goods;
-   vertical lifting platforms whose carriers are completely enclosed;
-   vertical lifting platforms prone to vandalism;
-   hazards occurring during manufacture;
-   earthquakes, flooding;
-   firefighting, evacuation and behaviour during a fire;
-   noise and vibrations;
-   the design of concrete, hard core, timber or other foundation or building arrangement;
-   the design of anchorage bolts to the supporting structure;
-   type C wheelchairs as defined in EN 12183 and/or EN 12184.
NOTE   For the actual type of machinery, noise is not considered a significant nor relevant hazard.
1.4   This draft European Standard is not applicable to Vertical Lifting Platforms intended for use by persons with impaired mobility which are manufactured before the date of its publication as an EN.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day