iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50270:2015/AC:2017

(Corrigendum)

Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

2018-04-12 - standard can be offered for EMC - D159/C07
TC- corrections needed to tables

Elektromagnetische Verträglichkeit - Elektrische Geräte für die Detektion und Messung von brennbaren Gasen, toxischen Gasen oder Sauerstoff

Compatibilité électromagnétique - Appareils de détection et de mesure de gaz combustible, de gaz toxique et d'oxygène

Elektromagnetna združljivost - Električne naprave za odkrivanje in merjenje vnetljivih in strupenih plinov ali kisika

General Information

Status
Published
Publication Date
04-Dec-2016
ICS
13.230 - Explosion protection
13.320 - Alarm and warning systems
33.100.01 - Electromagnetic compatibility in general
Technical Committee
EXP - Electrical apparatus for explosive atmospheres
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
31-Aug-2016
Due Date
05-Nov-2016
Completion Date
05-Dec-2016
Directive
2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
Ref Project
EN 50270:2015/AC:2016-08 - Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

Relations

Corrects
SIST EN 50270:2015 - Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
Effective Date
05-Jul-2016
Revised
oSIST prEN 50270:2019 - Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
Effective Date
05-Jun-2018

Buy Standard

EN 50270:2015/AC:2017EN 50270:2015/AC:2017
PreviousNext
Corrigendum
EN 50270:2015/AC:2017
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromagnetische Verträglichkeit - Elektrische Geräte für die Detektion und Messung von brennbaren Gasen, toxischen Gasen oder SauerstoffCompatibilité électromagnétique - Appareils de détection et de mesure de gaz combustible, de gaz toxique et d'oxygèneElectromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general13.320Alarmni in opozorilni sistemiAlarm and warning systems13.230Varstvo pred eksplozijoExplosion protectionICS:Ta slovenski standard je istoveten z:EN 50270:2015/AC:2016-08SIST EN 50270:2015/AC:2017en,fr,de01-januar-2017SIST EN 50270:2015/AC:2017SLOVENSKI
STANDARD



SIST EN 50270:2015/AC:2017



EN 50270:2015/AC:2016
Corrigendum to EN 5027
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50270:2015(Main)
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
EN 50270:2015

This European Standard specifies requirements for the electromagnetic compatibility (EMC) for electrical
apparatus for the detection and measurement of combustible gases, toxic gases or oxygen which are
subject to the performance standards for gas detection apparatus, for example EN 45544 (all parts),
EN 50104, EN 50194 (all parts), EN 50291 (all parts), EN 50379 (all parts), EN 50543, EN 50545-1, EN
60079-29-1 or EN 60079-29-4.
NOTE For the purpose of this standard the word ‘toxic’ covers ‘very toxic’, ‘toxic’, ‘harmful’, ‘corrosive‘, ‘irritating‘,
‘sensitising‘, ‘carcinogenic‘, ‘mutagenic‘ and ‘teratogenic‘.
This European Standard applies to apparatus intended for use in residential, commercial and lightindustrial
environments as well as to apparatus intended for use in industrial environments. The apparatus
may be AC-, DC- or battery powered.
This European Standard is also applicable to apparatus which is intended for use in hazardous areas
which may contain explosive or potentially explosive atmospheres. It covers only normal operation and
does not cover safety requirements related to EMC phenomena.
This standard is a product standard which is based on the product family standard EN 61326-1. This
product standard takes precedence over the product family standard and over generic standards.
This standard applies to electrical apparatus for the detection and measurement of combustible gases,
toxic gases or oxygen that include functions specified by the manufacturer as being safety functions and
can include functions specified as not being safety functions.
All performance standards for the detection and measurement of combustible gases, toxic gases or
oxygen include the minimum requirements for functional safety specified in EN 50271. There are also gas
detectors and gas detection systems which are intended to be used with safety integrity levels SIL 1 to
SIL 3 according to EN 50402 and EN 61508 (all parts). For functional safety in industrial applications, this
standard has taken into account those aspects of EN 61326–3–2 relating to the measuring and warning
function of the apparatus defined as safety function.
This standard specifies requirements for immunity tests in relation to continuous and transient, conducted
and radiated disturbances, including electrostatic discharges, and also for emission tests. The test
requirements are specified for each port considered.
Apparatus falling within the scope of this European Standard is classified as follows by the following types.
– Type 1: apparatus intended for use in residential, commercial and light-industrial environments, as
described in EN 61000-6-1 and EN 61000-6-3.
– Type 2: apparatus intended for use in industrial environments, as described in EN 61000-6-2 and
EN 61000-6-4.
Apparatus of type 1 where the manufacturer claims a safety integrity level should be considered as type 2
apparatus with regard to immunity requirements.
This European Standard does not apply to any of the following:
– apparatus intended for the detection of dusts or mists in air;
– scientific or laboratory based apparatus used only for analysis or measurement;
– apparatus used exclusively for process measurement purposes;
– apparatus for medical purposes;
– apparatus used for breath alcohol measurement
– apparatus intended for the direct measurement of automotive exhaust gases.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 50270:2019(Main)
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
FprEN 50270:2021

This document specifies requirements for the electromagnetic compatibility (EMC) for electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen which are subject to the performance standards for gas detection apparatus, for example EN 45544 (all parts), EN 50104, EN 50194 (all parts), EN 50291 (all parts), EN 50379 (all parts), EN 50543, EN 50545 1, EN 60079 29 1 or EN 60079 29 4.
NOTE   For the purpose of this standard, the word ‘toxic’ covers ‘very toxic’, ‘toxic’, ‘harmful’, ‘corrosive‘, ‘irritating‘, ‘sensitizing‘, ‘carcinogenic‘, ‘mutagenic‘ and ‘teratogenic‘.
This document applies to apparatus intended for use in residential, commercial and light-industrial environments as well as to apparatus intended for use in industrial environments, and includes AC-, DC- or battery powered apparatus.
This document is also applicable to apparatus which is intended for use in hazardous areas which could contain explosive or potentially explosive atmospheres. It covers only normal operation and does not cover safety requirements related to EMC phenomena.
This document is a product standard which is based on the product family standard EN 61326 1. prEN 50270:2019 takes precedence over the product family standard and over generic standards.
This document applies to electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen that include functions specified by the manufacturer as being safety functions and can include functions specified as not being safety functions.
All performance standards for the detection and measurement of combustible gases, toxic gases or oxygen include the minimum requirements for functional safety specified in EN 50271. There are also gas detectors and gas detection systems which are intended to be used with safety integrity levels SIL 1 to SIL 3 according to EN 50402 and EN 61508 (all parts). For functional safety in industrial applications, this document has taken into account those aspects of EN 61326 3 2 relating to the measuring and warning function of the apparatus defined as safety function.
This standard specifies requirements for immunity tests in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges, and also for emission tests. The test requirements are specified for each port considered.
Apparatus falling within the scope of this document are classified as follows by the following types.
—   Type 1: apparatus intended for use in residential, commercial and light-industrial environments, as described in EN 61000 6 1 and EN 61000 6 3.
—   Type 2: apparatus intended for use in industrial environments, as described in EN 61000 6 2 and EN 61000 6 4.
Type 1 apparatus for which the manufacturer claims a safety integrity level should be considered as type 2 apparatus with regard to immunity requirements.
This document does not apply to any of the following:
—   apparatus intended for the detection of dusts or mists in air;
—   scientific or laboratory based apparatus used only for analysis or measurement;
—   apparatus used exclusively for process measurement purposes;
—   apparatus for medical purposes;
—   apparatus used for breath alcohol measurement
—   apparatus intended for the direct measurement of automotive exhaust gases.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50270:2015(Main)
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
EN 50270:2015

This European Standard specifies requirements for the electromagnetic compatibility (EMC) for electrical
apparatus for the detection and measurement of combustible gases, toxic gases or oxygen which are
subject to the performance standards for gas detection apparatus, for example EN 45544 (all parts),
EN 50104, EN 50194 (all parts), EN 50291 (all parts), EN 50379 (all parts), EN 50543, EN 50545-1, EN
60079-29-1 or EN 60079-29-4.
NOTE For the purpose of this standard the word ‘toxic’ covers ‘very toxic’, ‘toxic’, ‘harmful’, ‘corrosive‘, ‘irritating‘,
‘sensitising‘, ‘carcinogenic‘, ‘mutagenic‘ and ‘teratogenic‘.
This European Standard applies to apparatus intended for use in residential, commercial and lightindustrial
environments as well as to apparatus intended for use in industrial environments. The apparatus
may be AC-, DC- or battery powered.
This European Standard is also applicable to apparatus which is intended for use in hazardous areas
which may contain explosive or potentially explosive atmospheres. It covers only normal operation and
does not cover safety requirements related to EMC phenomena.
This standard is a product standard which is based on the product family standard EN 61326-1. This
product standard takes precedence over the product family standard and over generic standards.
This standard applies to electrical apparatus for the detection and measurement of combustible gases,
toxic gases or oxygen that include functions specified by the manufacturer as being safety functions and
can include functions specified as not being safety functions.
All performance standards for the detection and measurement of combustible gases, toxic gases or
oxygen include the minimum requirements for functional safety specified in EN 50271. There are also gas
detectors and gas detection systems which are intended to be used with safety integrity levels SIL 1 to
SIL 3 according to EN 50402 and EN 61508 (all parts). For functional safety in industrial applications, this
standard has taken into account those aspects of EN 61326–3–2 relating to the measuring and warning
function of the apparatus defined as safety function.
This standard specifies requirements for immunity tests in relation to continuous and transient, conducted
and radiated disturbances, including electrostatic discharges, and also for emission tests. The test
requirements are specified for each port considered.
Apparatus falling within the scope of this European Standard is classified as follows by the following types.
– Type 1: apparatus intended for use in residential, commercial and light-industrial environments, as
described in EN 61000-6-1 and EN 61000-6-3.
– Type 2: apparatus intended for use in industrial environments, as described in EN 61000-6-2 and
EN 61000-6-4.
Apparatus of type 1 where the manufacturer claims a safety integrity level should be considered as type 2
apparatus with regard to immunity requirements.
This European Standard does not apply to any of the following:
– apparatus intended for the detection of dusts or mists in air;
– scientific or laboratory based apparatus used only for analysis or measurement;
– apparatus used exclusively for process measurement purposes;
– apparatus for medical purposes;
– apparatus used for breath alcohol measurement
– apparatus intended for the direct measurement of automotive exhaust gases.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 50270:2019(Main)
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
FprEN 50270:2021

This document specifies requirements for the electromagnetic compatibility (EMC) for electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen which are subject to the performance standards for gas detection apparatus, for example EN 45544 (all parts), EN 50104, EN 50194 (all parts), EN 50291 (all parts), EN 50379 (all parts), EN 50543, EN 50545 1, EN 60079 29 1 or EN 60079 29 4.
NOTE   For the purpose of this standard, the word ‘toxic’ covers ‘very toxic’, ‘toxic’, ‘harmful’, ‘corrosive‘, ‘irritating‘, ‘sensitizing‘, ‘carcinogenic‘, ‘mutagenic‘ and ‘teratogenic‘.
This document applies to apparatus intended for use in residential, commercial and light-industrial environments as well as to apparatus intended for use in industrial environments, and includes AC-, DC- or battery powered apparatus.
This document is also applicable to apparatus which is intended for use in hazardous areas which could contain explosive or potentially explosive atmospheres. It covers only normal operation and does not cover safety requirements related to EMC phenomena.
This document is a product standard which is based on the product family standard EN 61326 1. prEN 50270:2019 takes precedence over the product family standard and over generic standards.
This document applies to electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen that include functions specified by the manufacturer as being safety functions and can include functions specified as not being safety functions.
All performance standards for the detection and measurement of combustible gases, toxic gases or oxygen include the minimum requirements for functional safety specified in EN 50271. There are also gas detectors and gas detection systems which are intended to be used with safety integrity levels SIL 1 to SIL 3 according to EN 50402 and EN 61508 (all parts). For functional safety in industrial applications, this document has taken into account those aspects of EN 61326 3 2 relating to the measuring and warning function of the apparatus defined as safety function.
This standard specifies requirements for immunity tests in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges, and also for emission tests. The test requirements are specified for each port considered.
Apparatus falling within the scope of this document are classified as follows by the following types.
—   Type 1: apparatus intended for use in residential, commercial and light-industrial environments, as described in EN 61000 6 1 and EN 61000 6 3.
—   Type 2: apparatus intended for use in industrial environments, as described in EN 61000 6 2 and EN 61000 6 4.
Type 1 apparatus for which the manufacturer claims a safety integrity level should be considered as type 2 apparatus with regard to immunity requirements.
This document does not apply to any of the following:
—   apparatus intended for the detection of dusts or mists in air;
—   scientific or laboratory based apparatus used only for analysis or measurement;
—   apparatus used exclusively for process measurement purposes;
—   apparatus for medical purposes;
—   apparatus used for breath alcohol measurement
—   apparatus intended for the direct measurement of automotive exhaust gases.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-3:2023(Main)
Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
EN ISO 3262-3:2023

This document specifies requirements and corresponding methods of test for blanc fixe.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63044-4:2021/AC:2023(Corrigendum)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
EN IEC 63044-4:2021/AC:2023-07
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day