SIST EN 300 720-2 V1.2.1:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Ultra-High Frequency (UHF) on-board vessels communications systems and equipment - Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Ultra-High Frequency (UHF) on-board vessels communications systems and equipment - Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
Review of title and HS-RTT to align with STF 279 proposals.The present document specifies the minimum technical characteristics required for UHF on board vessels radio equipment and systems operating on frequencies allocated to the maritime mobile services by the ITU Radio Regulations [5]. The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Ultravisokofrekvenčni (UHF) komunikacijski sistemi in oprema za uporabo na krovu plovil - 2. del: Harmonizirani EN v skladu s členom 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 300 720-2 V1.2.1:2008
01-maj-2008
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50
8OWUDYLVRNRIUHNYHQþQL 8+) NRPXQLNDFLMVNLVLVWHPLLQRSUHPD]DXSRUDERQD
NURYXSORYLOGHO +DUPRQL]LUDQL(1YVNODGXVþOHQRPGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Ultra-High Frequency
(UHF) on-board vessels communications systems and equipment - Part 2: Harmonized
EN under article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 300 720-2 Version 1.2.1
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN 300 720-2 V1.2.1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 300 720-2 V1.2.1:2008
---------------------- Page: 2 ----------------------
SIST EN 300 720-2 V1.2.1:2008
ETSI EN 300 720-2 V1.2.1 (2007-11)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Ultra-High Frequency (UHF) on-board vessels
communications systems and equipment;
Part 2: Harmonized EN under article 3.2
of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 300 720-2 V1.2.1:2008
2 ETSI EN 300 720-2 V1.2.1 (2007-11)
Reference
REN/ERM-TG26-078-2
Keywords
maritime, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 720-2 V1.2.1:2008
3 ETSI EN 300 720-2 V1.2.1 (2007-11)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions, symbols and abbreviations .7
3.1 Definitions.7
3.2 Symbols.7
3.3 Abbreviations.7
4 Technical requirements specifications .7
4.1 Environmental profile.7
4.2 Conformance requirements.7
4.2.1 Transmitter frequency error .7
4.2.1.1 Definition.7
4.2.1.2 Limit.7
4.2.1.3 Conformance.7
4.2.2 Transmitter maximum effective radiated power.8
4.2.2.1 Definition.8
4.2.2.2 Limit.8
4.2.2.3 Conformance.8
4.2.3 Transmitter frequency deviation.8
4.2.3.1 Definition.8
4.2.3.2 Limit.8
4.2.3.3 Conformance.8
4.2.4 Frequency deviation at modulation frequencies above 3 kHz .8
4.2.4.1 Definition.8
4.2.4.2 Limit.8
4.2.4.3 Conformance.8
4.2.5 Transmitter adjacent channel power .8
4.2.5.1 Definition.8
4.2.5.2 Limit.8
4.2.5.3 Conformance.8
4.2.6 Transient frequency behaviour of the transmitter .9
4.2.6.1 Definition.9
4.2.6.2 Limit.9
4.2.6.3 Conformance.9
4.2.7 Transmitter conducted spurious emissions conveyed to the antenna.9
4.2.7.1 Definition.9
4.2.7.2 Limit.9
4.2.7.3 Conformance.9
4.2.8 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna.9
4.2.8.1 Definition.9
4.2.8.2 Limit.9
4.2.8.3 Conformance.9
4.2.9 Receiver maximum usable sensitivity .9
4.2.9.1 Definition.9
4.2.9.2 Limit.9
4.2.9.3 Conformance.10
4.2.10 Receiver co-channel rejection.10
4.2.10.1 Definition.10
4.2.10.2 Limit.10
4.2.10.3 Conformance.10
4.2.11 Receiver adjacent channel selectivity .10
4.2.11.1 Definition.10
ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 720-2 V1.2.1:2008
4 ETSI EN 300 720-2 V1.2.1 (2007-11)
4.2.11.2 Limit.10
4.2.11.3 Conformance.10
4.2.12 Receiver spurious response rejection.10
4.2.12.1 Definition.10
4.2.12.2 Limit.10
4.2.12.3 Conformance.10
4.2.13 Receiver intermodulation response.10
4.2.13.1 Definition.10
4.2.13.2 Limit.10
4.2.13.3 Conformance.11
4.2.14 Receiver blocking or desensitization .11
4.2.14.1 Definition.11
4.2.14.2 Limit.11
4.2.14.3 Conformance.11
4.2.15 Receiver conducted spurious emissions conveyed to the antenna .11
4.2.15.1 Definition.11
4.2.15.2 Limit.11
4.2.15.3 Conformance.11
4.2.16 Receiver radiated spurious emissions .11
4.2.16.1 Definition.11
4.2.16.2 Limit.11
4.2.16.3 Conformance.11
5 Testing for compliance with technical requirements.12
5.1 Test conditions, power supply and ambient temperatures.12
5.2 Interpretation of the measurement results .12
5.3 Essential radio test suites.12
5.3.1 Transmitter frequency error .12
5.3.2 Transmitter maximum effective radiated power.12
5.3.3 Transmitter frequency deviation.13
5.3.4 Frequency deviation at modulation frequencies above 3 kHz .13
5.3.5 Transmitter adjacent channel power .13
5.3.6 Transient behaviour of the transmitter .13
5.3.7 Transmitter conducted spurious emissions conveyed to the antenna.13
5.3.8 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna.13
5.4 Other test specifications.13
5.4.1 General.13
5.4.2 Receiver maximum usable sensitivity .13
5.4.3 Receiver co-channel rejection.13
5.4.4 Receiver adjacent channel selectivity .13
5.4.5 Receiver spurious response rejection.14
5.4.6 Receiver intermodulation response.14
5.4.7 Receiver blocking or desensitization .14
5.4.8 Receiver conducted spurious emissions conveyed to the antenna .14
5.4.9 Receiver radiated spurious emissions .14
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT).15
Annex B (informative): The EN title in the official languages .17
History .18
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 720-2 V1.2.1:2008
5 ETSI EN 300 720-2 V1.2.1 (2007-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Ultra-High Frequency (UHF) on-board vessels communications systems and equipment, as identified
below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [1].
Technical specifications relevant to Directive 1999/5/EC are given in annex A.
National transposition dates
Date of adoption of this EN: 12 October 2007
Date of latest announcement of this EN (doa): 31 January 2008
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 July 2008
Date of withdrawal of any conflicting National Standard (dow): 31 July 2009
ETSI
---------------------- Page: 7 ----------------------
SIST EN 300 720-2 V1.2.1:2008
6 ETSI EN 300 720-2 V1.2.1 (2007-11)
1 Scope
The present document specifies the minimum technical characteristics required for UHF on board vessels radio
equipment and systems operating on frequencies allocated to the maritime mobile services by the ITU Radio
Regulations [5].
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are specific (identified by date of publication, edition number, version number, etc.).
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] ETSI EN 300 720-1 (V1.3.1): "Electromagnetic compatibility and Radio Spectrum Matters
(ERM); Ultra-High Frequency (UHF) on-board vessels communications systems and equipment;
Part 1: Technical characteristics and methods of measurement".
[3] ETSI TR 100 028: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
[4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[5] ITU-R Recommendation M.1174-2 (05/2004): "Technical characteristics of equipment used for
on-board vessel communications in the bands between 450 and 470 MHz".
ETSI
---------------------- Page: 8 ----------------------
SIST EN 300 720-2 V1.2.1:2008
7 ETSI EN 300 720-2 V1.2.1 (2007-11)
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
supplier: entity referred to in the R&TTE Directive [1] responsible for the placing on the market of an equipment
within the scope of the Directive
3.2 Symbols
For the purposes of the present document, the following symbols apply:
emf electromotive force
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
R&TTE Radio and Telecommunications Terminal Equipment
RF Radio Frequency
UHF Ultra High Frequency
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be determined by the environmental class of the equipment. The equipment shall comply with
all the technical requirements of the present document at all times when operating within the boundary limits of the
required operational environmental profile.
4.2 Conformance requirements
4.2.1 Transmitter frequency error
4.2.1.1 Definition
The transmitter frequency error shall be as defined in EN 300 720-1 [2], clause 8.1.1.
4.2.1.2 Limit
The transmitter frequency error limit shall be as stated in EN 300 720-1 [2], clause 8.1.3.
4.2.1.3 Conformance
Conformance tests as defined in clause 5.3.1 shall be carried out.
ETSI
---------------------- Page: 9 ----------------------
SIST EN 300 720-2 V1.2.1:2008
8 ETSI EN 300 720-2 V1.2.1 (2007-11)
4.2.2 Transmitter maximum effective radiated power
4.2.2.1 Definition
The transmitter maximum effective radiated power shall be as defined in EN 300 720-1 [2], clause 8.2.1.
4.2.2.2 Limit
The transmitter maximum effective radiated power limit shall be as stated in EN 300 720-1 [2], clause 8.2.3.
4.2.2.3 Conformance
Conformance tests as defined in clause 5.3.2 shall be carried out.
4.2.3 Transmitter frequency deviation
4.2.3.1 Definition
The transmitter frequency deviation shall be as defined in EN 300 720-1 [2], clause 8.3.1.
4.2.3.2 Limit
The transmitter frequency deviation limit shall be as stated in EN 300 720-1 [2], clause 8.3.2.2.
4.2.3.3 Conformance
Conformance tests as defined in clause 5.3.3 shall be carried out.
4.2.4 Frequency deviation at modulation frequencies above 3 kHz
4.2.4.1 Definition
The transmitter frequency deviation shall be as defined in EN 300 720-1 [2], clause 8.3.1.
4.2.4.2 Limit
The transmitter frequency deviation limit shall be as stated in EN 300 720-1 [2], clause 8.3.3.2, figure 1.
4.2.4.3 Conformance
Conformance tests as defined in clause 5.3.4 shall be carried out.
4.2.5 Transmitter adjacent channel power
4.2.5.1 Definition
The transmitter adjacent channel power shall be as defined in EN 300 720-1 [2], clause 8.8.1.
4.2.5.2 Limit
The transmitter adjacent channel power limit shall be as stated in EN 300 720-1 [2], clause 8.8.3.
4.2.5.3 Conformance
Conformance tests as defined in clause 5.3.5 shall be carried out.
ETSI
---------------------- Page: 10 ----------------------
SIST EN 300 720-2 V1.2.1:2008
9 ETSI EN 300 720-2 V1.2.1 (2007-11)
4.2.6 Transient frequency behaviour of the transmitter
4.2.6.1 Definition
The transient frequency behaviour of the transmitter shall be as defined in EN 300 720-1 [2], clause 8.10.1.
4.2.6.2 Limit
The transient frequency behaviour of the transmitter limit shall be as stated in EN 300 720-1 [2], clause 8.10.3.
4.2.6.3 Conformance
Conformance tests as defined in clause 5.3.6 shall be carried out.
4.2.7 Transmitter conducted spurious emissions conveyed to the antenna
4.2.7.1 Definition
The transmitter conducted spurious emissions conveyed to the antenna shall be as defined in EN 300 720-1 [2],
clause 8.11.1.
4.2.7.2 Limit
The transmitter conducted spurious emissions conveyed to the antenna limit shall be as stated in EN 300 720-1 [2],
clause 8.11.3.
4.2.7.3 Conformance
Conformance tests as defined in clause 5.3.7 shall be carried out.
4.2.8 Transmitter cabinet radiation and conducted spurious emissions
other than those conveyed to the antenna
4.2.8.1 Definition
The transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna shall be as
defined in EN 300 720-1 [2], clause 8.12.1.
4.2.8.2 Limit
The transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna limit shall
be as stated in EN 300 720-1 [2], clause 8.12.3.
4.2.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.