SIST EN 13175:2019/oprA1:2020
(Amendment)LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
This document specifies minimum requirements for the design, testing and production testing of valves, including appropriate fittings, which are connected to mobile or static LPG pressure vessels above 150 l water capacity. Pressure relief valves and their ancillary equipment, contents gauges and automotive LPG components are outside the scope of this document.
This document does not apply to refineries or other process plants.
Flüssiggas-Geräte und Ausrüstungsteile - Spezifikation und Prüfung für Ventile und Fittinge an Druckbehältern für Flüssiggas (LPG)
Équipements pour GPL et leurs accessoires - Spécifications et essais des équipements et accessoires des réservoirs pour gaz de pétrole liquéfié (GPL)
Oprema in pribor za utekočinjeni naftni plin (UNP) - Specifikacija in preskušanje ventilov in fitingov za tlačne posode za UNP - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13175:2019/oprA1:2020
01-marec-2020
Oprema in pribor za utekočinjeni naftni plin (UNP) - Specifikacija in preskušanje
ventilov in fitingov za tlačne posode za UNP - Dopolnilo A1
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas
(LPG) pressure vessel valves and fittings
Flüssiggas-Geräte und Ausrüstungsteile - Spezifikation und Prüfung für Ventile und
Fittinge an Druckbehältern für Flüssiggas (LPG)
Équipements pour GPL et leurs accessoires - Spécifications et essais des équipements
et accessoires des réservoirs pour gaz de pétrole liquéfié (GPL)
Ta slovenski standard je istoveten z: EN 13175:2019/prA1:2020
ICS:
23.020.32 Tlačne posode Pressure vessels
23.060.01 Ventili na splošno Valves in general
75.180.01 Oprema za industrijo nafte in Equipment for petroleum and
zemeljskega plina na splošno natural gas industries in
general
SIST EN 13175:2019/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13175:2019/oprA1:2020
---------------------- Page: 2 ----------------------
SIST EN 13175:2019/oprA1:2020
DRAFT
EUROPEAN STANDARD
EN 13175:2019
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
February 2020
ICS 23.060.01
English Version
LPG Equipment and accessories - Specification and testing
for Liquefied Petroleum Gas (LPG) pressure vessel valves
and fittings
Équipements pour GPL et leurs accessoires - Flüssiggas-Geräte und Ausrüstungsteile - Spezifikation
Spécifications et essais des équipements et accessoires und Prüfung für Ventile und Fittinge an
des réservoirs pour gaz de pétrole liquéfié (GPL) Druckbehältern für Flüssiggas (LPG)
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 286.
This draft amendment A1, if approved, will modify the European Standard EN 13175:2019. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.