SIST EN 4662:2010
(Main)Aerospace series - Test specification for vibration control components
Aerospace series - Test specification for vibration control components
This standard specifies the procedure and the parameter for testing static and dynamic stiffness of vibration control components (e.g. shock mounts with bushes). This standard applies to vibration control components all installed for aircraft applications. It may be applied when referred to in the product standard or in a design specification.
Luft- und Raumfahrt - Prüfspezifikation für Bauteile zur Schwingungsminderung
Diese Norm legt Verfahren und Parameter zur Prüfung der statischen und dynamischen Steifigkeit von Bauteilen fest, die zur Schwingungsminderung vorgesehen sind (z. B. Shock Mounts mit Lagerbuchsen).
Diese Norm gilt für Bauteile, die in Flugzeuge eingebaut werden, um eine Schwingungsminderung zu erreichen. Die Norm darf angewendet werden, wenn in der jeweiligen Produktnorm oder in einer Auslegungs-spezifikation auf sie verwiesen wird.
Série aérospatiale - Spécification d'essais pour des composants de contrôle en vibration
Aeronavtika - Specifikacija preskusa za komponente za zmanjšanje vibracij
Ta standard določa postopek in parameter za preskušanje statične in dinamične trdnosti komponent za zmanjšanje vibracij (npr. podstavek proti tresljajem s pušami). Ta standard velja za vse komponente za nadzor vibracij, za uporabo v aeronavtiki. Lahko se uporablja v povezavi s standardom proizvoda ali v specifikaciji načrta.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Specifikacija preskusa za komponente za zmanjšanje vibracijLuft- und Raumfahrt - Prüfspezifikation für Bauteile zur SchwingungsminderungSérie aérospatiale - Spécification d'essais pour des composants de contrôle en vibrationAerospace series - Test specification for vibration control components49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace construction17.160Vibracije, meritve udarcev in vibracijVibrations, shock and vibration measurementsICS:Ta slovenski standard je istoveten z:EN 4662:2010SIST EN 4662:2010en01-maj-2010SIST EN 4662:2010SLOVENSKI
STANDARD
SIST EN 4662:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4662
March 2010 ICS 17.160; 49.035 English Version
Aerospace series - Test specification for vibration control components
Série aérospatiale - Spécification d'essais pour des composants de contrôle en vibration
Luft- und Raumfahrt - Prüfspezifikation für Bauteile zur Schwingungsminderung This European Standard was approved by CEN on 6 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4662:2010: ESIST EN 4662:2010
EN 4662:2010 (E) 2 Contents Page Foreword .31Scope .42Definition and symbols .42.1Coordinate system.42.2Symbols .43Test set up .74Static stiffness .84.1Test parameters .84.2Stiffness evaluation .84.3Parasitic stiffness .95Dynamic stiffness . 105.1Parameters . 105.2Stiffness evaluation . 10 SIST EN 4662:2010
EN 4662:2010 (E) 3 Foreword This document (EN 4662:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4662:2010
EN 4662:2010 (E) 4 1 Scope This standard specifies the procedure and the parameter for testing static and d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.