SIST EN 62061:2005/A2:2016
(Amendment)Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems (IEC 62061:2005/A2:2015)
Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems (IEC 62061:2005/A2:2015)
Sicherheit von Maschinen - Funktionale Sicherheit sicherheitsbezogener elektrischer, elektronischer und programmierbarer elektronischer Steuerungssysteme (IEC 62061:2005/A2:2015)
Sécurité des machines - Sécurité fonctionnelle des systèmes de commande électriques, électroniques et électroniques programmables relatifs à la sécurité (IEC 62061:2005/A2:2015)
Varnost strojev - Funkcijska varnost na varnost vezanih električnih, elektronskih in programirljivih elektronskih krmilnih sistemov (IEC 62061:2005/A2:2015)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62061:2005/A2:2016
01-april-2016
9DUQRVWVWURMHY)XQNFLMVNDYDUQRVWQDYDUQRVWYH]DQLKHOHNWULþQLKHOHNWURQVNLKLQ
SURJUDPLUOMLYLKHOHNWURQVNLKNUPLOQLKVLVWHPRY ,(& $
Safety of machinery - Functional safety of safety-related electrical, Electronic and
programmable electronic control systems (IEC 62061:2005/A2:2015)
Sicherheit von Maschinen - Funktionale Sicherheit sicherheitsbezogener elektrischer,
elektronischer und programmierbarer elektronischer Steuerungssysteme (IEC
62061:2005/A2:2015)
Sécurité des machines - Sécurité fonctionnelle des systèmes de commande électriques,
électroniques et électroniques programmables relatifs à la sécurité (IEC
62061:2005/A2:2015)
Ta slovenski standard je istoveten z: EN 62061:2005/A2:2015
ICS:
13.110 Varnost strojev Safety of machinery
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 62061:2005/A2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62061:2005/A2:2016
---------------------- Page: 2 ----------------------
SIST EN 62061:2005/A2:2016
EUROPEAN STANDARD EN 62061:2005/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2015
ICS 13.110; 25.040.99; 29.020
English Version
Safety of machinery - Functional safety of safety-related
electrical, Electronic and programmable electronic control
systems
(IEC 62061:2005/A2:2015)
Sécurité des machines - Sécurité fonctionnelle des Sicherheit von Maschinen - Funktionale Sicherheit
systèmes de commande électriques, électroniques et sicherheitsbezogener elektrischer, elektronischer und
électroniques programmables relatifs à la sécurité programmierbarer elektronischer Steuerungssysteme
(IEC 62061:2005/A2:2015) (IEC 62061:2005/A2:2015)
This amendment A2 modifies the European Standard EN 62061:2005; it was approved by CENELEC on 2015-07-31. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62061:2005/A2:2015 E
---------------------- Page: 3 ----------------------
SIST EN 62061:2005/A2:2016
EN 62061:2005/A2:2015
European foreword
The text of document 44/718/CDV, future edition 1 of IEC 62061:2005/A2, prepared by IEC TC 44 "Safety
of machinery - Electrotechnical aspects" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 62061:2005/A2:2015.
The following dates are fixed:
• latest date by which the document has (dop) 2016-05-01
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-07-31
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of EN
62061:2005.
Endorsement notice
The text of the International Standard IEC 62061:2005/A2:2015 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 62061:2005/A2:2016
EN 62061:2005/A2:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.