SIST EN 1113:2015
(Main)Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
This European Standard specifies:
- the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses should comply;
- the procedures for testing these characteristics.
This European Standard applies to shower hoses of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers.
This European Standard applies to shower hoses connected downstream of the obturator of the tapware.
Hoses which are an integral part of sanitary tapware (sink and wash basin mixing valves) or hoses intended to connect sanitary tapware to the water supplies are not covered by this European Standard.
Details of pressures and temperatures are given in Table 1.
Sanitärarmaturen - Brauseschläuche für Sanitärarmaturen für Wasserversorgungssysteme vom Typ 1 und Typ 2 - Allgemeine technische Spezifikation
Diese Europäische Norm legt Folgendes fest:
Maße und Dichtheit sowie mechanisches und hydraulisches Verhalten, die/das Brauseschläuche aufweisen sollten;
die Verfahren zur Prüfung auf Einhaltung dieser Anforderungen.
Die vorliegende Europäische Norm gilt unabhängig vom verwendeten Werkstoff für Brauseschläuche für die Körperhygiene als Ausrüstung und Ergänzung von Sanitärarmaturen in Duschen und Bädern.
Diese Europäische Norm gilt für Brauseschläuche für den Anschluss nach dem Absperrorgan der Armatur.
Diese Europäische Norm deckt keine Schläuche zur Verbindung der Sanitärarmaturen mit der Wasserver-sorgung und keine Schläuche ab, die integraler Bestandteil der Sanitärarmatur sind (Mischbatterien für Spülbecken und Handwaschbecken).
Einzelheiten zu Druck und Temperatur sind in Tabelle 1 enthalten.
Robinetterie sanitaire - Flexibles de douches pour robinetterie sanitaire pour les systèmes d`alimentation type 1 et type 2 - Spécifications techniques générales
La présente Norme européenne spécifie :
- les caractéristiques dimensionnelles, d’étanchéité, de comportement mécanique et hydraulique auxquelles il convient que les flexibles de douches répondent ;
- les modes opératoires d’essai permettant de contrôler ces caractéristiques.
La présente Norme européenne s’applique aux flexibles de douches, quel que soit le matériau utilisé, destinés à équiper et à compléter les robinetteries sanitaires de baignoires ou de douches réservées pour l’hygiène corporelle.
La présente Norme européenne s’applique aux flexibles de douches connectés en aval de l’obturateur de la robinetterie.
Les flexibles destinés à raccorder les robinetteries sanitaires à l’installation, ainsi que ceux qui font partie de la robinetterie (mitigeurs pour évier et lavabo) ne sont pas couverts par la présente Norme européenne.
Les exigences relatives à la pression et à la température sont données dans le Tableau 1.
Sanitarne armature - Gibke cevi za sanitarne armature sistemov za oskrbo z vodo tipa 1 in tipa 2 - Splošne tehnične zahteve
General Information
Relations
Overview
EN 1113:2015 (CEN) specifies the general technical requirements and test methods for shower hoses used with sanitary tapware for water supply systems of Type 1 and Type 2. The standard covers dimensional, leaktightness, mechanical and hydraulic characteristics and applies to hoses used for ablutionary purposes that connect downstream of the tap obturator. It does not cover hoses that are integral to tapware or hoses that connect tapware to the water supply.
Key topics and technical requirements
Scope of use and classifications
- Applies to shower hoses for Type 1 and Type 2 water supply systems; Table 1 in the standard defines the detailed pressure and temperature conditions and recommended limits.
- Flow-rate classes are defined (e.g., Type 1: Class 1 and Class 2; Type 2: Class E and Class H) with clear flow-rate ranges per class to match supply conditions.
Dimensional & designation requirements
- Standard connection thread sizes and designations (e.g., G 1/2 × G 1/2 or G 1/2 × G 3/4), hose length, external sheath material (plastic/metal), nut types and cone dimensions are specified for interchangeability and correct sealing.
Materials & hygiene
- Materials in contact with potable water must not present health risks or alter water quality up to the maximum working temperature; visible Ni-Cr coatings must comply with EN 248.
Hydraulic requirements and flow testing
- Hydraulic performance and flow-rate verification procedures are described; flow-rate classes link to operating pressure ranges.
Mechanical & leaktightness testing
- Includes tensile strength, resistance to flexing (endurance), pressure resistance at elevated temperature, leaktightness after mechanical testing, thermal shock, and rotary connection performance. Detailed test apparatus, procedures and pass/fail criteria are provided.
Marking
- Permanent, legible manufacturer/supplier marking is required; full designation (thread, length, material, EN reference, class) is recommended.
Applications and users
- Manufacturers - design and certify shower hoses to meet European market requirements.
- Test laboratories - perform compliance testing (tensile, flexing, pressure, leaktightness, thermal).
- Specifiers & procurement - select hoses compliant with EN 1113:2015 for commercial and residential projects.
- Installers and maintenance teams - ensure correct hose selection for Type 1/Type 2 systems and verify marking and connections.
- Regulators & certification bodies - use the standard for national adoption and conformity assessment in CEN member countries.
Related standards
- EN 248 - electrodeposited Ni-Cr coating requirements (relevant for chrome-plated hose fittings)
- EN ISO 228-1 - pipe thread dimensions where joints are not pressure-tight (used for connecting threads)
EN 1113:2015 is a practical, test-focused standard ensuring safe, interoperable and hygienic shower hoses for European water supply systems. Keywords: EN 1113:2015, shower hoses, sanitary tapware, flow rate classes, pressure testing, leaktightness, dimensional requirements, CEN.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sanitärarmaturen - Brauseschläuche für Sanitärarmaturen für Wasserversorgungssysteme vom Typ 1 und Typ 2 - Allgemeine technische SpezifikationRobinetterie sanitaire - Flexibles de douches pour robinetterie sanitaire pour les systèmes d`alimentation type 1 et type 2 - Spécifications techniques généralesSanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification91.140.70Sanitarne napraveSanitary installations23.040.70Gumene cevi in armatureHoses and hose assembliesICS:Ta slovenski standard je istoveten z:EN 1113:2015SIST EN 1113:2015en,fr,de01-junij-2015SIST EN 1113:2015SLOVENSKI
STANDARDSIST EN 1113:2009+A1:20111DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1113
April 2015 ICS 23.040.70; 91.140.70 Supersedes EN 1113:2008+A1:2011English Version
Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
Robinetterie sanitaire - Flexibles de douches pour robinetterie sanitaire pour les systèmes d`alimentation type 1 et type 2 - Spécifications techniques générales
Sanitärarmaturen - Brauseschläuche für Sanitärarmaturen für Wasserversorgungssysteme vom Typ 1 und Typ 2 - Allgemeine technische Spezifikation This European Standard was approved by CEN on 12 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1113:2015 ESIST EN 1113:2015
system Operating range of shower hoses Flow rates Limits Recommended See Table 3 Type 1
see Figure 1 Dynamic Pressure (0,05 to 0,5) MPa [(0,5 to 5) bar] Dynamic Pressure (0,1 to 0,3) MPa [(1,0 to 3,0) bar] Class 1 0,42 l/s ≤ Q (25,2 l/min ≤ Q)
at (0,0200,3+) MPa [(0,203+) bar] Class 2 0,20 l/s ≤ Q < 0,42 l/s (12 l/min ≤ Q < 25,2 l/min)
at (0,0200,3+) MPa [(0,203+) bar] Type 2
see Figure 2 Dynamic Pressure (0,
...
Frequently Asked Questions
SIST EN 1113:2015 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification". This standard covers: This European Standard specifies: - the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses should comply; - the procedures for testing these characteristics. This European Standard applies to shower hoses of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers. This European Standard applies to shower hoses connected downstream of the obturator of the tapware. Hoses which are an integral part of sanitary tapware (sink and wash basin mixing valves) or hoses intended to connect sanitary tapware to the water supplies are not covered by this European Standard. Details of pressures and temperatures are given in Table 1.
This European Standard specifies: - the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses should comply; - the procedures for testing these characteristics. This European Standard applies to shower hoses of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers. This European Standard applies to shower hoses connected downstream of the obturator of the tapware. Hoses which are an integral part of sanitary tapware (sink and wash basin mixing valves) or hoses intended to connect sanitary tapware to the water supplies are not covered by this European Standard. Details of pressures and temperatures are given in Table 1.
SIST EN 1113:2015 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies; 91.140.70 - Sanitary installations. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1113:2015 has the following relationships with other standards: It is inter standard links to SIST EN 1113:2009+A1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 1113:2015 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...