EN 61987-16:2017
(Main)Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists of properties (LOPs) for density measuring equipment for electronic data exchange
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists of properties (LOPs) for density measuring equipment for electronic data exchange
IEC 61987-16:2016 provides an - operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for a density measuring equipment, and - device lists of properties (DLOP) for a range of density measuring equipment types describing them. The structures of the OLOP and the DLOP correspond with the general structures defined in IEC 61987-11 and agree with the fundamentals for the construction of LOPs defined in IEC 61987-10.
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 16: Merkmalleisten (ML) für Dichtemessgeräte für den elektronischen Datenaustausch
Mesure et commande des processus industriels - Éléments et structures de données dans les catalogues d’équipements de processus - Partie 16: Listes de propriétés (LOP) pour équipement de mesure de densité pour l’échange électronique de données
L’IEC 61987 fournit - une liste de propriétés fonctionnelles (OLOP) pour la description des paramètres fonctionnels et l’ensemble des exigences pour un équipement de mesure de densité, et - une liste de propriétés d’appareils (DLOP) pour la description d’une gamme de types d’équipements de mesure de densité. Les structures des OLOP et des DLOP correspondent aux structures générales définies dans l’IEC 61987-11 et sont conformes aux principes essentiels de construction des LOP définis dans l’IEC 61987-10.
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v katalogih procesne opreme - 16. del: Seznam lastnosti opreme za merjenje gostote za elektronsko izmenjavo podatkov (IEC 61987-16:2016)
Ta del standarda IEC 61987 zajema
• operativni seznam lastnosti (OLOP) za opis operativnih parametrov in zbirko zahtev glede opreme za merjenje gostote ter
• sezname lastnosti naprav (DLOP) za več vrst opreme za merjenje gostote, ki jih opisujejo.
Strukture operativnega seznama lastnosti in seznamov lastnosti naprav ustrezajo splošnim strukturam, opredeljenim v standardu IEC 61987-11, in so skladne s seznami lastnosti, opredeljenimi v standardu IEC 61987-10.
Vidiki, ki niso povezani z operativnim seznamom lastnosti in so potrebni pri različnih procesih elektronske izmenjave podatkov, opisanih v standardu IEC 61987-10, bodo objavljeni v standardu IEC 61987-921.
Knjižnice lastnosti in blokov, ki se uporabljajo v zadevnih seznamih lastnosti, so podane v dodatkih C in D.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2017
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v
katalogih procesne opreme - 16. del: Seznam lastnosti opreme za merjenje gostote
za elektronsko izmenjavo podatkov (IEC 61987-16:2016)
Industrial-process measurement and control - Data structures and elements in process
equipment catalogues - Part 16: Lists of properties (LOPs) for density measuring
equipment for electronic data exchange (IEC 61987-16:2016)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 16: Merkmalleisten (ML) für Dichtemessgeräte für den
elektronischen Datenaustausch (IEC 61987-16:2016)
Mesure et commande des processus industriels - Éléments et structures de données
dans les catalogues d'équipements de processus - Partie 16: Listes de propriétés (LOP)
pour équipement de mesure de densité pour l'échange électronique de données (IEC
61987-16:2016)
Ta slovenski standard je istoveten z: EN 61987-16:2017
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61987-16
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS 25.040.40; 35.040.99; 35.240.30
English Version
Industrial-process measurement and control - Data structures
and elements in process equipment catalogues - Part 16: Lists of
properties (LOPs) for density measuring equipment for electronic
data exchange
(IEC 61987-16:2016)
Mesure et commande des processus industriels - Éléments Industrielle Leittechnik - Datenstrukturen und -elemente in
et structures de données dans les catalogues Katalogen der Prozessleittechnik - Teil 16: Merkmalleisten
d'équipements de processus - Partie 16: Listes de (ML) für Dichtemessgeräte für den elektronischen
propriétés (LOP) pour équipement de mesure de densité Datenaustausch
pour l'échange électronique de données (IEC 61987-16:2016)
(IEC 61987-16:2016)
This European Standard was approved by CENELEC on 2017-01-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61987-16:2017 E
European foreword
The text of document 65E/512/FDIS, future edition 1 of IEC 61987-16, prepared by SC 65E “Devices
and integration in enterprise systems” of IEC/TC 65 “Industrial process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2017-10-21
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-04-21
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61987-16:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60079-0:2011 NOTE Harmonized as EN 60079-0:2012
IEC 60947-5-6:1999 NOTE Harmonized as EN 60947-5-6:2000
IEC 61298-1:2008 NOTE Harmonized as EN 61298-1:2008
IEC 61298-2:2008 NOTE Harmonized as EN 61298-2:2008
IEC 61298-3:2008 NOTE Harmonized as EN 61298-3:2008
IEC 61360-1 NOTE Harmonized as EN 61360-1
IEC 61360-2 NOTE Harmonized as EN 61360-2
IEC 61360-5 NOTE Harmonized as EN 61360-5
IEC 61784-1:2014 NOTE Harmonized as EN 61784-1:2014
IEC 61987-1 NOTE Harmonized as EN 61987-1
IEC 61987-92 NOTE Harmonized as EN 61987-92
ISO 5167-2:2003 NOTE Harmonized as EN ISO5167-2:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61360 series Standard data elements types with EN 61360 series
associated classification scheme for
electric items
IEC 61987-10 2009 Industrial-process measurement and EN 61987-10 2009
control - Data structures and elements in
process equipment catalogues - Part 10:
Lists of Properties (LOPs) for Industrial-
Process Measurement and Control for
Electronic Data Exchange - Fundamentals
- - + AC 2011
IEC 61987-11 2016 Industrial-Process Measurement and EN 61987-11 2017
Control - Data Structures and Elements in
Process Equipment Catalogues. Part 11:
List of Properties (LOP) of measuring
equipment for electronic data exchange -
generic structures
IEC 61987-16 ®
Edition 1.0 2016-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial-process measurement and control – Data structures and elements in
process equipment catalogues –
Part 16: Lists of properties (LOPs) for density measuring equipment for
electronic data exchange
Mesure et commande des processus industriels – Éléments et structures de
données dans les catalogues d’équipements de processus –
Partie 16: Listes de propriétés (LOP) pour équipement de mesure de densité
pour l’échange électronique de données
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.040.99; 35.240.30 ISBN 978-2-8322-3756-4
– 2 – IEC 61987-16:2016 © IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General . 7
4.1 Overview. 7
4.2 Depiction of OLOP and DLOPs . 7
4.3 Examples of DLOP block usage . 7
Annex A (normative) Operating list of properties for density measuring equipment . 13
Annex B (normative) Device lists of properties for density measuring equipment . 14
B.1 Density transmitter . 14
B.2 Buoyancy density transmitter . 14
B.3 Refractive index density transmitter . 14
B.4 Vibrating tube density transmitter . 14
B.5 Radiometric density transmitter . 15
B.6 Vibrating fork/rod density transmitter . 15
B.7 Ultrasonic density transmitter . 15
B.8 Microwave density transmitter . 15
B.9 Separate density transmitter . 16
Annex C (normative) Property library . 17
Annex D (normative) Block library for considered device types . 18
Bibliography . 19
Table 1 – Example for a vibrating tube density transmitter . 8
IEC 61987-16:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL –
DATA STRUCTURES AND ELEMENTS IN PROCESS
EQUIPMENT CATALOGUES –
Part 16: Lists of properties (LOPs) for density
measuring equipment for electronic data exchange
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Norma
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.