EN ISO 11145:2008
(Main)Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006)
Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006)
ISO 11145:2006 defines basic terms, symbols and units of measurement for the field of laser technology in order to unify the terminology and to arrive at clear definitions and reproducible tests of beam parameters and laser-oriented product properties.
Optik und Photonik - Laser und Laseranlagen - Begriffe und Formelzeichen (ISO 11145:2006)
Dieses iInternationale Dokument definiert die grundlegenden Begriffe, Formelzeichen und Maßeinheiten für
den Bereich der Lasertechnik, um den Sprachgebrauch zu vereinheitlichen und zu klaren Definitionen und
reproduzierbaren Prüfungen der Laserparameter und laserbezogenen Produkteigenschaften zu kommen.
ANMERKUNG Die hierarchisch gegliederte Begriffsbildung für Laser, wie sie in dieser Internationalen Norm angegeben
ist, unterscheidet sich von der hierarchischen Begriffsbildung in IEC 60825-1. ISO und IEC haben diesen Unterschied
beraten und sind übereingekommen, dass sie die beiden verschiedenen Zielsetzungen widerspiegelt, für die die beiden
Normen entwickelt wurden. Genaueres ist im informativen Anhang A dargelegt.
Optique et photonique - Lasers et équipements associés aux lasers - Vocabulaire et symboles (ISO 11145:2006)
L'ISO 11145:2006 définit les termes fondamentaux, les symboles et les unités de mesure à utiliser dans le domaine de la technologie laser de manière à unifier la terminologie et à établir des définitions claires et des essais reproductibles concernant les paramètres du faisceau et les propriétés des appareils à laser.
Optika in fotonska tehnologija - Laserji in z laserji povezana oprema - Slovar in simboli (ISO 11145:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2008
Optika in fotonska tehnologija - Laserji in z laserji povezana oprema - Slovar in
simboli (ISO 11145:2006)
Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
(ISO 11145:2006)
Optik und Photonik - Laser und Laseranlagen - Begriffe und Formelzeichen (ISO
11145:2006)
Optique et photonique - Lasers et équipements associés aux lasers - Vocabulaire et
symboles (ISO 11145:2006)
Ta slovenski standard je istoveten z: EN ISO 11145:2008
ICS:
01.040.31 Elektronika (Slovarji) Electronics (Vocabularies)
01.080.40 *UDILþQLVLPEROL]DXSRUDERY Graphical symbols for use on
ULVEDKGLDJUDPLKQDþUWLKY electrical and electronics
HOHNWURWHKQLNLLQHOHNWURQLNL engineering drawings,
WHUYXVWUH]QLWHKQLþQL diagrams, charts and in
SURL]YRGQLGRNXPHQWDFLML relevant technical product
documentation
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 11145
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2008
ICS 01.080.40; 31.260; 01.040.31 Supersedes EN ISO 11145:2006
English Version
Optics and photonics - Lasers and laser-related equipment -
Vocabulary and symbols (ISO 11145:2006)
Optique et photonique - Lasers et équipements associés Optik und Photonik - Laser und Laseranlagen - Begriffe und
aux lasers - Vocabulaire et symboles (ISO 11145:2006) Formelzeichen (ISO 11145:2006)
This European Standard was approved by CEN on 22 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11145:2008: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Annex ZA ((informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
Foreword
The text of ISO 11145:2006 has been prepared by Technical Committee ISO/TC 172 “Optics and optical
instruments” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
11145:2008 by Technical Committee CEN/TC 123 “Lasers and photonics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2009, and conflicting national standards shall be withdrawn at
the latest by January 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11145:2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11145:2006 has been approved by CEN as a EN ISO 11145:2008 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential Requirements of EU
Directive 98/37/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 98/37/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements 1.5.10 Radiation and 1.5.12 Laser equipment of that Directive and
associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the products falling within the
scope of this International standard.
Annex ZB
(informative)
Relationship between this European Standard and the Essential Requirements of
EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements 1.5.10 Radiation and 1.5.12 Laser radiation of that Directive and
associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 11145
NORME
Third edition
Troisième édition
INTERNATIONALE
2006-05-01
Optics and photonics — Lasers and
laser-related equipment — Vocabulary
and symbols
Optique et photonique — Lasers et
équipements associés aux lasers —
Vocabulaire et symboles
Reference number
Numéro de référence
ISO 11145:2006(E/F)
©
ISO 2006
ISO 11145:2006(E/F)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2006
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse
ii © ISO 2006 – All rights reserved/Tous droits réservés
ISO 11145:2006(E/F)
Contents Page
Foreword. v
1 Scope. 1
2 Symbols and units of measurement. 1
3 Terms and definitions . 4
Annex A (informative) Explanation of the difference in terminology between IEC 60825-1 and
ISO 11145. 24
Bibliography . 26
Symbols list. 27
Alphabetical index . 28
French alphabetical index (Index alphabétique). 29
ISO 11145:2006(E/F)
Sommaire Page
Avant-propos.vi
1 Domaine d'application.1
2 Symboles et unités de mesure .1
3 Termes et définitions.4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.