EN 14870-1:2011
(Main)Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified)
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified)
This European Standard specifies the technical delivery conditions for bends made by the induction bending process for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.
This European Standard is applicable to induction bends made from seamless and welded pipe of unalloyed or low-alloy steels.
NOTE These are typically C-Mn steels or low-alloy steels that are appropriate for the corresponding level and grade of line pipe in accordance with ISO 3183.
This European Standard specifies the requirements for the manufacture of two product specification levels (PSLs) of induction bend corresponding to product specification levels given for pipe in ISO 3183.
This European Standard is not applicable to the selection of the induction bend product specification level. It is the responsibility of the purchaser to specify the PSL, based upon the intended use and design requirements; see also ISO 3183:2007, Introduction.
This European Standard is not applicable to pipeline bends made by other manufacturing processes.
On-land supply systems used by the gas supply industry excluding gas infrastructure from the input of gas into the on-shore transmission network up to the inlet connection of gas appliances "are excluded from the scope of this standard.
Erdöl- und Erdgasindustrie - Im Induktionsverfahren gefertigte Rohrbögen, Fittings und Flansche für Rohrleitungs-Transportsysteme - Teil 1: Im Induktionsverfahren gefertigte Rohrbögen (ISO 15590-1:2009, modifiziert)
Industries du pétrole et du gaz naturel - Coudes d'induction, raccords et brides pour systèmes de transport par conduites - Partie 1: Coudes d'induction (ISO 15590-1:2009 modifiée)
La présente Norme internationale spécifie les conditions techniques de livraison des coudes fabriqués par cintrage par induction et destinés aux systèmes de transport par conduites des industries du pétrole et du gaz naturel, tels que définis dans l'ISO 13623.
La présente Norme internationale est applicable aux coudes cintrés par induction, fabriqués à partir de tubes soudés et non soudés, en aciers non alliés ou faiblement alliés.
NOTE Il s'agit généralement d'aciers C-Mn ou d'aciers faiblement alliés adaptés aux niveau et nuance correspondants du tube de conduite, conformément à l'ISO 3183.
La présente Norme internationale spécifie les exigences de fabrication de deux niveaux de spécification de produit (PSL) des coudes cintrés par induction, correspondant aux niveaux de spécification indiqués pour les tubes dans l'ISO 3183.
La présente Norme internationale n'est pas applicable à la sélection du niveau de spécification des produits cintrés par induction. Il incombe à l'acheteur de spécifier le PSL en se basant sur l'usage prévu et les exigences de conception (voir aussi ISO 3183:2007, Introduction).
La présente Norme internationale n'est pas applicable aux cintres de conduites fabriqués par d'autres procédés.
Les systèmes d'alimentation terrestres utilisés par l'industrie d'alimentation en gaz, à l'exclusion de l'infrastructure allant de l'entrée du gaz dans le réseau de transmission terrestre jusqu'au raccord d'entrée des appareils à gaz, sont exclus du domaine d'application de la présente norme.
Industrija nafte in zemeljskega plina - Indukcijska cevna kolena, fitingi in prirobnice za naftovodne transportne sisteme - 1. del: Indukcijska cevna kolena (ISO 15590-1:2009, spremenjen)
Ta mednarodni standard določa tehnične pogoje dostave za cevna kolena, izdelana s postopkom upogibanja z indukcijo, za uporabo v transportnih cevovodnih sistemih za industrijo nafte in zemeljskega plina, kot je opredeljeno v ISO 13623. Ta mednarodni standard velja za indukcijska cevna kolena, narejena iz nevarjenih in varjenih cevi iz nelegiranih ali malo legiranih jekel.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrija nafte in zemeljskega plina - Indukcijska cevna kolena, fitingi in prirobnice za naftovodne transportne sisteme - 1. del: Indukcijska cevna kolena (ISO 15590-1:2009, spremenjen)Erdöl- und Erdgasindustrie - Im Induktionsverfahren gefertigte Rohrbögen, Fittings und Flansche für Rohrleitungs-Transportsysteme - Teil 1: Im Induktionsverfahren gefertigte
RohrbögenIndustries du pétrole et du gaz naturel - Coudes d'induction, raccords et brides pour systèmes de transport par conduites - Partie 1: Coudes d'induction (ISO 15590-1:2009 modifiée)Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified)83.140.30Cevi, fitingi in ventili iz polimernih materialovPlastics pipes, fittings and valves75.200Petroleum products and natural gas handling equipmentICS:Ta slovenski standard je istoveten z:EN 14870-1:2011SIST EN 14870-1:2011en01-oktober-2011SIST EN 14870-1:2011SLOVENSKI
STANDARDSIST EN 14870-1:20051DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14870-1
June 2011 ICS 23.040.40; 23.040.60; 75.200 Supersedes EN 14870-1:2004English Version
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified)
Industries du pétrole et du gaz naturel - Coudes d'induction, raccords et brides pour systèmes de transport par conduites - Partie 1: Coudes d'induction (ISO 15590-1:2009 modifiée)
Erdöl- und Erdgasindustrie - Im Induktionsverfahren gefertigte Rohrbögen, Fittings und Flansche für Rohrleitungs-Transportsysteme - Teil 1: Im Induktionsverfahren gefertigte
Rohrbögen This European Standard was approved by CEN on 10 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14870-1:2011: ESIST EN 14870-1:2011
Manufacturing procedure specification . 33A.1 Introduction . 33A.2 Manufacturing procedure specification . 33Annex B (normative)
PSL 2S bends ordered for sour service . 35B.1 Introduction . 35B.2 Additional information that shall be supplied by the purchaser . 35SIST EN 14870-1:2011
Where the expression “International Standard” is used, it is understood as “European Standard”. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.