EN ISO 9038:2003
(Main)Test for sustained combustibility of liquids (ISO 9038:2002)
Test for sustained combustibility of liquids (ISO 9038:2002)
Many national and international regulations classify liquids as presenting a flammable hazard on the basis of their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot "sustain combustion" at some specified temperature or temperatures. This International Standard specifies a pass/fail procedure to determine whether or not a liquid product, that would be classified as "flammable" by virtue of its flash point, has the ability to sustain combustion at the temperature or temperatures specified in the appropriate regulations.
The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, which have a flash point. It is not applicable to painted surfaces in respect of assessing their potential fire hazards.
Prüfung der Weiterbrennbarkeit von Flüssigkeiten (ISO: 9038:2002)
In vielen nationalen und internationalen Vorschriften wird die Entzündungsgefahr von Flüssigkeiten nach ihrem mit einem anerkannten Verfahren bestimmten Flammpunkt klassifiziert. Einige dieser Vorschriften lassen eine Erniedrigung der Gefahrenstufe zu, wenn die Flüssigkeit bei einer bestimmten Temperatur oder bei bestimmten Temperaturen nicht weiterbrennt. Diese Internationale Norm legt ein Ja/nein-Verfahren fest, mit dem bestimmt wird, ob ein flüssiges Produkt, das auf Grund seines Flammpunktes als "entzündlich" eingestuft würde, bei der/den in den betreffenden Vorschriften angegebenen Temperatur/en selbstunterhaltend weiterbrennen kann oder nicht.
ANMERKUNG 1 In den Empfehlungen der Vereinten Nationen zum Transport von gefährlichen Gütern sind Temperaturen von 60,5 °C bis 75,0 °C festgelegt.
Das Verfahren ist anwendbar bei Gemischen wie Beschichtungsstoffe (einschließlich wasserverdünnbarer Beschichtungsstoffe), Lackbindemittel, Lösemittel, Mineralöl- oder ähnliche Produkte, die einen Flammpunkt haben. Es ist nicht anwendbar zum Beurteilen der Feuergefährlichkeit von flüssigen Beschichtungen.
ANMERKUNG 2 Dieses Prüfverfahren für das Weiterbrennen kann zusätzlich zum Prüfverfahren für den Flammpunkt zum Beurteilen der Feuergefährlichkeit eines Produktes eingesetzt werden. Besondere Vorsicht ist beim Übertragen von Ergebnissen aus Versuchen im Labor auf Verhältnisse in der Praxis geboten, da sich große Mengen von Flüssigkeiten anders verhalten können als kleine Proben.
Essai de combustion entretenue de liquides (ISO 9038:2002)
De nombreux règlements nationaux et internationaux classent les liquides présentant un risque d'inflammabilité sur la base de leur point d'éclair, déterminé par une méthode reconnue. Certains de ces règlements autorisent une dérogation si le produit concerné ne peut pas «entretenir la combustion» à une ou plusieurs températures spécifiées. La présente Norme internationale spécifie une méthode «tout ou rien» pour déterminer si un produit liquide, qui serait classé comme «inflammable» du fait de son point d'éclair, a ou n'a pas la capacité d'entretenir une combustion à la température ou aux températures spécifiées dans les règlements pertinents.
Le mode opératoire est applicable aux peintures (y compris les dispersions à l'eau), vernis, liants, solvants, produits pétroliers ou apparentés et aux adhésifs, qui ont un point d'éclair. Elle n'est pas applicable aux surfaces peintes en ce qui concerne leur comportement au feu.
Test for sustained combustibility of liquids (ISO 9038:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9038:2004
01-maj-2004
Test for sustained combustibility of liquids (ISO 9038:2002)
Test for sustained combustibility of liquids (ISO 9038:2002)
Prüfung der Weiterbrennbarkeit von Flüssigkeiten (ISO: 9038:2002)
Essai de combustion entretenue de liquides (ISO 9038:2002)
Ta slovenski standard je istoveten z: EN ISO 9038:2003
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
87.040 Barve in laki Paints and varnishes
SIST EN ISO 9038:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9038:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 9038:2004
EUROPEAN STANDARD
EN ISO 9038
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2003
ICS 13.220.40; 87.040
English version
Test for sustained combustibility of liquids (ISO 9038:2002)
Essai de combustion entretenue de liquides (ISO Prüfung der Weiterbrennbarkeit von Flüssigkeiten (ISO:
9038:2002) 9038:2002)
This European Standard was approved by CEN on 3 November 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9038:2003 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9038:2004
EN ISO 9038:2003 (E)
Foreword
The text of ISO 9038:2002 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 9038:2003 by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2004, and conflicting national standards
shall be withdrawn at the latest by May 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 9038:2002 has been approved by CEN as EN ISO 9038:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9038:2004
EN ISO 9038:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 1513 1992 Paints and varnishes - Examination EN ISO 1513 1994
and preparation of samples for testing
ISO 3170 1988 Petroleum liquids - Manual sampling EN ISO 3170 1998
ISO 3171 1988 Petroleum liquids - Automatic pipeline EN ISO 3171 1999
sampling
ISO 15528 2000 Paints, varnishes and raw materials EN ISO 15528 2000
for paints and varnishes - Sampling
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9038:2004
--------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.