iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10084:1998

(Main)

Case hardening steels - Technical delivery conditions

Case hardening steels - Technical delivery conditions

This European Standard gives the technical delivery requirements for - semi- finished products, hot formed, for example blooms, billets, slabs (see notes 2 and 3); - bars (see note 2); - rod; - wide flats; - hot-rolled sheet/plate and strip; - hammer and drop forgings (see note 2), manufactured from the case hardening unalloyed or alloyed steels (see note 4) listed in table 3 and supplied in one of the heat treatment conditions given for the different types of products in table 1, lines 2 to 7 and in one of the surface conditions given in table 2.

Einsatzstähle - Technische Lieferbedingungen

Diese Europäische Norm legt die technischen Lieferbedingungen fest für: - Halbzeug, warmgeformt, zum Beispiel Vorblöcke, Vorbrammen Knüppel (siehe Anmerkungen 2 und 3); - Stabstahl (siehe Anmerkung 2); - Walzdraht; - Breitflachstahl; - warmgewalztes Blech und Band; - Freiform- und Gesenkschmiedestücke (siehe Anmerkung 2) aus den in Tabelle 3 aufgeführten unlegierten und legierten Einsatzstählen (siehe Anmerkung 4), die in einem der für die verschiedenen Erzeugnisformen in Tabelle 1, Zeilen 2 bis 7 geliefert werden.

Aciers pour cémentation - Conditions techniques de livraison

La présente norme européenne fournit les conditions techniques de livraison des: - demi-produits transformés à chaud, par exemple: blooms, billettes, brames (voir notes 2 et 3); - barres (voir note 2); - fils-machine; - larges-plats; - tôles/feuilles et bandes laminées à chaud; - pièces forgées par martelage ou estampage (voir note 2); fabriqués en aciers non alliés ou alliés pour cémentation (voir note 4) tels qu'énumérés dans le tableau 3 et fournis dans l'un des états de traitement thermique donnés pour les différents types de produits aux lignes 2 à 7 du tableau 1.

Cementacijska jekla - Tehnični dobavni pogoji

General Information

Status
Withdrawn
Publication Date
21-Apr-1998
Withdrawal Date
01-Apr-2008
ICS
77.140.10 - Heat-treatable steels
Technical Committee
ECISS/TC 105 - Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
Drafting Committee
ECISS/TC 23 - Steels for heat treatment, alloy steels and free-cutting steels - Qualities
Current Stage
9000 - Start of review/2 Year Review Enquiry - Review Enquiry
Start Date
07-Oct-2008
Completion Date
07-Oct-2008
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 10084:2000 - Case hardening steels - Technical delivery conditions

Relations

Replaced By
EN 10084:2008 - Case hardening steels - Technical delivery conditions
Effective Date
22-Dec-2008

Buy Standard

EN 10084:2000EN 10084:2000
PreviousNext
Standard
EN 10084:2000
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10084:2000
01-april-2000
&HPHQWDFLMVNDMHNOD7HKQLþQLGREDYQLSRJRML
Case hardening steels - Technical delivery conditions
Einsatzstähle - Technische Lieferbedingungen
Aciers pour cémentation - Conditions techniques de livraison
Ta slovenski standard
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 683-3:2022(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022)
SIST EN ISO 683-3:2022

This document specifies the technical delivery requirements for
—    semi-finished products, hot formed (e.g. blooms, billets, slabs) (see NOTE 1),
—    bars (see NOTE 1),
—    wire rod,
—    finished flat products, and
—    hammer or drop forgings (see NOTE 1)
manufactured from the case-hardening non-alloy or alloy steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of case-hardened machine parts.
NOTE 1   Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammerforged bars are covered under semi-finished products or bars and not under the term “hammer and drop forgings”.
NOTE 2   For International Standards relating to steels conforming with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10132:2021(Main)
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions
SIST EN 10132:2021

This document specifies the technical delivery conditions for cold rolled narrow steel strip made of non alloy and alloy steel grades in the form of coils and cut lengths in rolling widths less than 600 mm. Cold rolled narrow steel strip is available in grades of case hardening steel and of steels for quenching and tempering for general and special applications particularily springs.
-   Case hardening steels in thicknesses up to and including 10 mm;
-   steels for quenching and tempering in thicknesses up to and including 6 mm in the conditions annealed (+A), annealed and skin passed (+LC) or cold rolled (+CR);
-   steels in the quenched and tempered condition (+QT) in thicknesses between 0,30 mm and 3,00 mm.
In special cases supplementary requirements or deviations with respect to this document can be agreed between the purchaser and the supplier at the time of enquiry and order (see 5.2 and Annex A).
In addition to the requirements of this document, the general technical delivery requirements specified in EN 10021 apply.
This document does not cover cold rolled flat products for which separate standards exist, e.g.:
-   cold rolled uncoated low carbon steel narrow strip for cold forming (EN 10139);
-   cold rolled steel flat products with higher yield strength for cold forming (EN 10268).

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-5:2021(Main)
Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
SIST EN ISO 683-5:2021

ISO 683-5:2017 gives the technical delivery requirements for
-      semi-finished products, e.g. blooms, billets, slabs (see note 1),
-      bars (see note 1),
-      wire rod,
-      hot-rolled plates (see note 2), and
-      hammer or drop forgings (see note 1)
manufactured from the nitriding steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1, rows 2 to 5, and in one of the surface conditions given in Table 2.
The steels are generally intended for the fabrication of quenched and tempered and, subsequently, nitriding machine parts.
The requirements for mechanical properties given in this document are restricted to the sizes given in Table 6.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       The term "plate" includes in the following also wide flats unless otherwise stated.
In special cases, variations in these technical delivery requirements or additions to these requirements can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to this document, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
SIST EN ISO 9443:2018

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.
By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.
This document is particularly applicable to steels for engineering and structural applications.
This document does not include any requirements for the permissible depth of surface decarburization.
NOTE       The determination of depth of surface decarburization is presented in ISO 3887.
The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4957:2018(Main)
Tool steels (ISO 4957:2018)
SIST EN ISO 4957:2018

This document specifies requirements for the following grades of wrought tool steels:
a)    non-alloy cold-work tool steels;
b)    alloy cold-work tool steels;
c)    alloy hot-work tool steels;
d)    high-speed tool steels.
If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or cold-rolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1.
NOTE       Tables 2, 4, 6 and 8 cover only those steels which have gained certain international importance, which does not mean, however, that they are available in all industrial countries. In addition, a number of other steels for tools are specified in regional, national or company standards.
Where the heat resistance of the tools is of particular importance, as for example in the case of tools for hot forming glass, the material selection is based on ISO 4955.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-1:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016)
SIST EN ISO 683-1:2018

ISO 683-1:2016 specifies the technical delivery requirements for
-      semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
-      bars (see Note 1),
-      wire rod,
-      finished flat products, and
-      hammer or drop forgings (see Note 1)
manufactured from the direct hardening non-alloy steels and the non-alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 9 and 11), but can also be partly used in the normalized condition (see Table 10).
The requirements for mechanical properties given in ISO 683-1:2016 are restricted to the sizes given in Tables 9 and 10.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are, in the following, covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition.
NOTE 3       For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.
NOTE 4       ISO 683-1 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement between the manufacturer and purchaser at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-1:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-4:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels (ISO 683-4:2016)
SIST EN ISO 683-4:2018

ISO 683-4:2016 gives the technical delivery requirements for semi-finished products (e.g. blooms, billets, slabs), bars and wire rod, manufactured from the free-cutting steels listed in Table 2 and supplied in one of the treatment conditions given for the different types of products in Table 1, rows 2 to 4.
It covers three groups of free-cutting steels for mechanical purposes as listed in Table 2, namely
a)    not intended for heat treatment,
b)    suitable for case-hardening, and
c)    suitable for quenching and tempering.
Free-cutting steels are often used as bright bars. For these products, refer to ISO 683‑18.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-4:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-2:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016)
SIST EN ISO 683-2:2018

ISO 683-2:2016 specifies the technical delivery requirements for
-      semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
-      bars (see Note 1),
-      wire rod,
       finished flat products, and
-      hammer or drop forgings (see Note 1)
manufactured from the direct hardening alloy steels and the alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 8 and 9).
The requirements for mechanical properties given in ISO 683-2:2016 are restricted to the sizes given in the relevant Table 8.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition.
NOTE 3       For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.
NOTE 4       ISO 683-2 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-2:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10277:2018(Main)
Bright steel products - Technical delivery conditions
SIST EN 10277:2018

This document specifies the technical delivery requirements for bright steel bars in the drawn, peeled/turned or ground condition and they are intended for mechanical purposes, for example for machine parts. The bright bars are subdivided into the following steel types:
a)   non-alloy general engineering steels;
b)   non-alloy free-cutting steels;
c)   non-alloy and alloy case-hardening steels;
d)   non-alloy and alloy steels for quenching and tempering.
This document lists the mechanical characteristics for products up to 100 mm in thickness. For larger dimensions, the manufacturer and purchaser agree on mechanical properties at the time of enquiry and order.
It does not cover cold rolled products and cut lengths produced from strip or sheet by cutting. Bright steel products of stainless steels are to be found in EN 10088 3.
In addition to this document, the general technical delivery requirements of EN 10021 are applicable.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-17:2014(Main)
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
SIST EN ISO 683-17:2015

ISO 683-17:2014 specifies the technical delivery requirements for five groups of wrought ball and roller bearing steels: through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr), case-hardening bearing steels, induction-hardening bearing steels (unalloyed and alloyed), stainless bearing steels, and high-temperature bearing steels.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day