EN ISO 75-3:1996

Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993)

Kunststoffe - Bestimmung der Wärmeformbeständigkeitstemperatur - Teil 3: Hochfeste duroplastische laminate und langfaserverstärkte Kunststoffe (ISO 75-3:1993)

1.1 Dieser Teil von ISO 75 beschreibt eine Methode zur Bestimmung der Wärmeformbeständigkeitstemperatur unter Last (Biegespannung) von hochfesten duroplastischen Laminaten und gepreßten langfaserverstärkten Kunststoffen. Die Belastung ist nicht fest vorgeschrieben, wie in Teil 2 dieser Internationalen Norm, sondern sie ist eine Funktion (1/10) der Biegefestigkeit oder einer festgelegten Festigkeit. Dadurch ist es möglich, die Methode auf Materialien mit einem großen Bereich von Festigkeiten und Biegemoduln anzuwenden.

Plastiques - Détermination de la température de fléchissement sous charge - Partie 3: Stratifiés thermodurcissables à haute résistance et plastiques renforcés de fibres longues (ISO 75-3:1993)

Polimerni materiali - Določanje temperature upogiba pod obremenitvijo - 3. del: Duromerni laminati z visoko trdnostjo in polimerni materiali, ojačeni z dolgimi vlakni (ISO 75-3:1993)

General Information

• Status: Withdrawn
• Publication Date: 06-Feb-1996
• Withdrawal Date: 14-May-2004
• ICS: 83.120 - Reinforced plastics
• ICS: 83.140.20 - Laminated sheets
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/SC 1/WG 3 - Mechanical properties and preparation of test specimens
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-May-2004
• Completion Date: 15-May-2004
• Ref Project: SIST EN ISO 75-3:2000 - Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993)

Relations

• Replaced By: EN ISO 75-3:2004 - Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates (ISO 75-3:2004)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 75-3:2000
01-maj-2000
3ROLPHUQLPDWHULDOL'RORþDQMHWHPSHUDWXUHXSRJLEDSRGREUHPHQLWYLMRGHO
'XURPHUQLODPLQDWL]YLVRNRWUGQRVWMRLQSROLPHUQLPDWHULDOLRMDþHQL]GROJLPL
YODNQL,62
Plastics - Determination of temperature of deflection under load - Part 3: High-strength
thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993)
Kunststoffe - Bestimmung der Wärmeformbeständigkeitstemperatur - Teil 3: Hochfeste
duroplastische laminate und langfaserverstärkte Kunststoffe (ISO 75-3:1993)
Plastiques - Détermination de la température de fléchissement sous charge - Partie 3:
Stratifiés thermodurcissables a haute résistance et plastiques renforcés de fibres
longues (ISO 75-3:1993)
Ta slovenski standard je istoveten z: EN ISO 75-3:1996
ICS:
83.080.10 Duromeri Thermosetting materials
83.120 2MDþDQLSROLPHUL Reinforced plastics
SIST EN ISO 75-3:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 75-3:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 75-3:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 75-3:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 75-3:2000
INTERNATIONAL IS0
STANDARD 75-3
First edition
1993-09-l 5
Plastics - Determination of temperature
of deflection under load -
Part 3:
High-strength thermosetting laminates and
long-fibre-reinforced plastics
P/as tiques - D&termination de la tempkature de fkchissemen t sous
charge -
Partie 3: Stratifies thermodurcissables A haute rdsistance et plastiques
renforc& de fibres longues
Reference number
IS0 75-3:1993(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 75-3:2000
IS0 75=3:1993(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(I EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 75-3 was prepared by Technical Committee
ISO/TC 61, Plastics, Sub-Committee SC 2, Mechanical properties.
Together with the other parts, it cancels and replaces the second edition
of IS0 75 (IS0 75:1987), which has been technically revised.
IS0 75 consists of the following parts, under the general title Plastics -
Determination of temperature of deflection under load:
- Part 1: General test method
- Part 2: Plastics and ebonite
- Part 3: High-strength thermosetting laminates and long-fibre-
reinforced plastics
0 IS0 1993
All rights reserved. No part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 75-3:2000
IS0 75=3:1993(E)
INTERNATIONAL STANDARD
Plastics - Determination of temperature of deflection
under load -
Part 3:
High-strength thermosetting laminates and
long-fibre-reinforced plastics
IS0 178:1993, Plastics - Determination of flexural
1 Scope
properties.
1.1 This part of IS0 75 specifies a method for the
IS0 295:1991, Plastics - Compression moulding of
determination of the temperature of deflection under
test specimens of thermosetting materials.
load (bending stress) of high-strength thermosetting
long-f i bre-
laminates and compression-moulded IS0 2818:-l), Plastics - Preparation of test speci-
reinforced plastics. The test load used is not a fixed mens by machining.
load, as in part 2 of this International Standard, but a
function (1 /lo) of the ultimate or specified load. This - Multipurpose test speci-
IS0 3167:1993, Plastics
allows the method to be applied to materials with a
mens.
wide range of strengths and bending moduli.
3 Definitions
1.2 The test specimen is tested in a flatwise pos-
ition.
See IS0 75-l :1993, clause 3.
1.3 See IS0 75:1993, subclause 1.3.
4 Principle
A standard test specimen made of thermosetting
2 Normative references
laminate or long-fibre-reinforced plastic is subjected
to a bending stress equal to 1 /lo of a specified or
The following standards contain provisions which,
measured flexural strength. The temperature is raised
through reference in this text, constitute provisions
at a uniform rate, and the temperature at which a
of this part of IS0 75. At the time of publication, the
specified deflection occurs is measured.
editions indicated were valid. All standards are subject
to revision, and parties to agreements based on
...