iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 28187:1991

(Main)

Household refrigerating appliances - Refrigerator-freezers - Characteristics and test methods (ISO 8187:1991)

Household refrigerating appliances - Refrigerator-freezers - Characteristics and test methods (ISO 8187:1991)

This international standard specifies the essential charasteristics for household refrigerator-freezers with or without chiller, which are wholly factory assembled, and lays down the methods of test for the checking of these characteristics.

Haushalts-Kühlgeräte - Kühl-Gefriergeräte - Eigenschaften und Prüfverfahren (ISO 8187:1991)

Diese Internationale Norm legt die wesentlichen Eigenschaften von anschlussfertigen, farbrikmässig komplettierten Haushalt-kühl-Gefriergeräten mit oder ohne Frischhaltefach fest sowie die prüfverfahren, nach denen diese Merkmale zu überprüfen sind.

Réfrigérateurs à usage ménager - Réfrigérateurs-congélateurs - Caractéristiques et méthodes d'essai (ISO 8187:1991)

La présente Norme internationale spécifie les caractéristiques essentielles des réfrigérateurs-congélaterus ménagers, avec ou sans compartiment à température modérée, qui sont entièrement assemblés en usine. Elle spécifie également les méthodes d'essai pour la vérification de ces caractéristiques.

Household refrigerating appliances - Refrigerator-freezers - Characteristics and test methods (ISO 8187:1991)

General Information

Status
Withdrawn
Publication Date
01-Dec-1991
Withdrawal Date
25-Oct-2005
ICS
97.040.30 - Domestic refrigerating appliances
Technical Committee
CEN/TC 44 - Household refrigerating appliances and commercial refrigerated cabinets
Drafting Committee
CEN/TC 44 - Household refrigerating appliances and commercial refrigerated cabinets
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Oct-2005
Completion Date
26-Oct-2005
Ref Project
SIST EN 28187:2002 - Household refrigerating appliances - Refrigerator-freezers - Characteristics and test methods (ISO 8187:1991)

Relations

Amended By
EN 28187:1991/A1:1997 - Household refrigerating appliances - Refrigerator-freezers -Characteristics and test methods - Amendment 1: Special compartments for the preservation of highly perishable foodstuf fs (ISO 8187:1991/AM1:1997)
Effective Date
22-Dec-2008
Replaced By
EN ISO 15502:2005 - Household refrigerating appliances - Characteristics and test methods (ISO 15502:2005)
Effective Date
22-Dec-2008

Buy Standard

EN 28187:2002EN 28187:2002
PreviousNext
Standard
EN 28187:2002
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Household refrigerating appliances - Refrigerator-freezers - Characteristics and test methods (ISO 8187:1991)Haushalts-Kühlgeräte - Kühl-Gefriergeräte - Eigenschaften und Prüfverfahren (ISO 8187:1991)Réfrigérateurs a usage ménager - Réfrigérateurs-congélateurs - Caractéristiques et méthodes d'essai (ISO 8187:1991)Household refrigerating appliances - Refrigerator-freezers - Characteristics and test methods (ISO 8187:1991)97.040.30Hladilni aparati za domDomestic refrigerating appliancesICS:Ta slovenski standard je istoveten z:EN 28187:1991SIST EN 28187:2002en01-januar-2002SIST EN 28187:2002SLOVENSKI
STANDARD



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 28187:2002



SIST EN 2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 22043:2020(Main)
Ice-cream freezers - Classification, requirements and test conditions (ISO 22043:2020)
SIST EN ISO 22043:2021

This document specifies the classification for horizontal closed ice-cream freezer with access of the product from the top via transparent or solid lid(s) and specifies their requirements and test methods.
The ice-cream freezers defined in this document are different from supermarket segment freezers, as they work with static air cooling, with a skin evaporator (no evaporator fan) and are used specifically for the storage and display of pre-packed ice-cream.
This document is only applicable to integral type refrigeration systems. It is not applicable to remote and secondary system type cabinets. Ice-cream freezers defined in this document are intended to have a net volume ≤600 l. For transparent lid ice-cream freezers only, they are intended to have a net volume/TDA ≥ 0,35 m.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22043:2020(Main)
Ice-cream freezers - Classification, requirements and test conditions (ISO 22043:2020)
SIST EN ISO 22043:2021

This document specifies the classification for horizontal closed ice-cream freezer with access of the product from the top via transparent or solid lid(s) and specifies their requirements and test methods.
The ice-cream freezers defined in this document are different from supermarket segment freezers, as they work with static air cooling, with a skin evaporator (no evaporator fan) and are used specifically for the storage and display of pre-packed ice-cream.
This document is only applicable to integral type refrigeration systems. It is not applicable to remote and secondary system type cabinets. Ice-cream freezers defined in this document are intended to have a net volume ≤600 l. For transparent lid ice-cream freezers only, they are intended to have a net volume/TDA ≥ 0,35 m.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 14739:2004(Main)
Scheme for carrying out a risk assessment for flammable refrigerants in case of household refrigerators and freezers
SIST CEN/TR 14739:2004

The document gives a scheme for carrying out a risk assessment for flammable refrigerants in case of house-hold refrigerators and freezers with refrigerants of group A3 according to EN 378 1, taking into consideration a sealed system and a refrigerant charge of not more than 150 g. Sealed systems are refrigerating systems in which all refrigerant containing parts are made tight by welding, brazing or similar permanent connection.
NOTE   For risk assessment the method with flow diagrams is selected, because these are helpful for checking the possible ignition of the whole appliances and to estimate the probability of ignition. It takes EN ISO 12100, EN 1050, EN 1127, EN 60335 2 24/A53, E DIN 7003 into consideration.
At least the probability of deflagration is the product of multiplication of the probability of defects of different components and the probability for the presence of explosive atmosphere and the probability for the ignition sources.

  • Technical report
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 732:1998(Main)
Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators
SIST EN 732:1999

This standard defines the constructional features, safety and operational requirements, test techniques and marking of absorption refrigerators using commercial butane and propane (referred to within the text as "appliances".  This standard is applicable to room sealed (Type C11) and flueless (Type A11), as defined in CR 1749, refrigerators using gas equipment fuelled by third family gases as classified in 4.2.  This standard only applies to type testing.  The gas consumption of absorption refrigerators is of the same order of magnitude as pilots currently used on other types of burners, maximum being 60 g/h.  Consequently efficiency measurement is not considered relevant for these appliances and is not covered by this standard.  This standard does not cover the requirements.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11267:2023(Main)
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023)
SIST EN ISO 11267:2023

This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/oprA2:2023
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18743:2015/A1:2023(Amendment)
Microbiology of the food chain - Detection of Trichinella larvae in meat by artificial digestion method - Amendment 1: Method validation studies and performance characteristics (ISO 18743:2015/Amd 1:2023)
SIST EN ISO 18743:2015/A1:2023
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day