iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12195-2:2000

(Main)

Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres

Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres

This Part of EN 12195 specifies safety requirements for web lashing made from man-made fibres with flat woven webbings for multiple use and of lashing combinations with woven webbings for the safe surface transport of goods on road vehicles, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof; specifies methods for testing of web lashing for securing of loads; etc.

Ladungssicherungseinrichtungen auf Straßenfahrzeugen -Sicherheit - Teil 2: Zurrgurte aus Chemiefasern

Dieser Teil der Norm EN 12195 - legt die Sicherheitsanforderungen fest für Zurrmittel aus Chemiefasern mit Gurten zur Mehrfachverwendung und Zurrkombinationen mit Gurten zum sicheren Transport von Ladungen auf Fahrzeugen, z.B. Lastkraftwagen und deren Anhängern, sowohl auf Straßen, auf Schiffen als auch per Bahn und/oder in entsprechender Kombination; - legt Prüfverfahren für Zurrmittel zur Ladungssicherung fest; usw.

Dispositifs d'arrimage des charges sur véhicules routiers -Sécurité - Partie 2: Sangles en fibres synthétiques

La présente partie de l'EN 12195 spécifie les prescriptions de sécurité relatives aux sangles d'arrimage en fibres synthétiques à sangles plates tissées pour usage multiple, ainsi qu'aux combinaisons d'amarrages à sangles destinées au transport de surface, et en toute sécurité, de marchandises par véhicules routiers par exemple, camions et remorques qui sont utilisées sur route ou situées sur navires, ou par chemin de fer et/ou combinaison de ces divers modes de transport; spécifie les méthodes d'essai des sangles d'arrimage des charges; etc.

Naprave za varovanje tovora na cestnih vozilih - Varnost - 2. del: Pleteni zategovalni pasovi iz umetnih vlaken

General Information

Status
Published
Publication Date
21-Nov-2000
Withdrawal Date
30-May-2001
ICS
53.080 - Storage equipment
55.180.99 - Other standards related to freight distribution of goods
Technical Committee
CEN/TC 168 - Chains, ropes, webbing, slings and accessories - safaty
Drafting Committee
CEN/TC 168/WG 6 - Load restraint assemblies
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date
17-Aug-2022
Directive
2014/47/EU - Directive 2014/47/EU of the European Parliament and of the Council of 3 April 2014 on the technical roadside inspection of the roadworthiness of commercial vehicles circulating in the Union and repealing Directive 2000/30/EC Text with EEA relevance
Ref Project
SIST EN 12195-2:2001 - Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres

Buy Standard

EN 12195-2:2001EN 12195-2:2001
PreviousNext
Standard
EN 12195-2:2001
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Naprave za varovanje tovora na cestnih vozilih - Varnost - 2. del: Pleteni zategovalni pasovi iz umetnih vlakenLadungssicherungseinrichtungen auf Straßenfahrzeugen -Sicherheit - Teil 2: Zurrgurte aus ChemiefasernDispositifs d'arrimage des charges sur véhicules routiers -Sécurité - Partie 2: Sangles en fibres synthétiquesLoad restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres55.180.99Drugi standardi v zvezi z distribucijo blaga s prevozomOther standards related to freight distribution of goods53.080Storage equipmentICS:Ta slovenski standard j
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12195-1:2010(Main)
Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces
SIST EN 12195-1:2011

This European Standard is applicable to the design of securing methods (blocking, lashing, and combinations) for securing of loads for surface transport by road vehicles or parts of them (lorries, trailers, containers and swap bodies), including their transport on vessels or by rail and/or combinations thereof. Hump shunting with acceleration over 1 g during railway transport is excluded, as it is not foreseen in combined transport. (Web lashings see EN 12195-2, lashing chains see EN 12195-3, lashing steel wire ropes see EN 12195-4).
This European Standard does not apply for vehicles with a total weight equal to or lower than 3 500 kg.
NOTE   Lighter vehicles can have driving characteristics, which give higher values of acceleration on the road.
For dimensioning of load securing a distinction is made between stable loads and loads liable to tilting.
Furthermore, the acceleration coefficients for surface transport are specified.
For over top lashing the force loss in the tension force of the lashing at the outer edges between load and lashing is taken into account. The securing forces to be chosen for calculation in this EN 12195-1 are static forces produced by blocking or tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Examples for the application of calculations are given in Annex A.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12195-4:2003(Main)
Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
SIST EN 12195-4:2004

This Part 4 of EN 12195
- specifies safety requirements for lashing steel wire ropes and flat lashing steel wire ropes and lashing combina-tions with lashing steel wire ropes for the safe surface transport of loads on load carriers, e. g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof;
- stipulates procedures for testing lashing steel wire ropes and flat lashing steel wire ropes;
- deals with hazards which could occur when lashing steel wire ropes and flat lashing steel wire ropes are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12195-3:2001(Main)
Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
SIST EN 12195-3:2001

This Part of EN 12195 specifies safety requirements for lashing chains and lashing combinations with chain for the safe surface transport of goods on load carriers, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof. The standard includes only tensioning devices to be hand driven with a maximum handforce of 500 N. It does not give requirements for multi-purpose lover blocks other than to the type of fine calibrated chain and the additional marking  of the maximum hand-operating force.
This part of EN 12195 deals with hazards which could occur when lashing chains are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12195-1(Main)
Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of securing forces
oSIST prEN 12195-1:2008

This Part of prEN 12195 specifies acceleration coefficients for surface transport. It also gives methods of calculation of lashing forces acting on goods on load carriers, lorries, trailers and swap bodies, either on road, on vessels or by rail and/or combinations thereof for different types of load and different types of lashing. It  excludes the hump shunting during railway transport (web lashings see EN 12195-2, lashing chains see EN 12195-3, wire lashing ropes see prEN 12195-4).
The lashing forces to be chosen for calculation in this EN 12195-1 are static forces produced by tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Instructions for the application of calculations are also specified.

  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12195-1:2010(Main)
Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces
SIST EN 12195-1:2011

This European Standard is applicable to the design of securing methods (blocking, lashing, and combinations) for securing of loads for surface transport by road vehicles or parts of them (lorries, trailers, containers and swap bodies), including their transport on vessels or by rail and/or combinations thereof. Hump shunting with acceleration over 1 g during railway transport is excluded, as it is not foreseen in combined transport. (Web lashings see EN 12195-2, lashing chains see EN 12195-3, lashing steel wire ropes see EN 12195-4).
This European Standard does not apply for vehicles with a total weight equal to or lower than 3 500 kg.
NOTE   Lighter vehicles can have driving characteristics, which give higher values of acceleration on the road.
For dimensioning of load securing a distinction is made between stable loads and loads liable to tilting.
Furthermore, the acceleration coefficients for surface transport are specified.
For over top lashing the force loss in the tension force of the lashing at the outer edges between load and lashing is taken into account. The securing forces to be chosen for calculation in this EN 12195-1 are static forces produced by blocking or tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Examples for the application of calculations are given in Annex A.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12195-4:2003(Main)
Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
SIST EN 12195-4:2004

This Part 4 of EN 12195
- specifies safety requirements for lashing steel wire ropes and flat lashing steel wire ropes and lashing combina-tions with lashing steel wire ropes for the safe surface transport of loads on load carriers, e. g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof;
- stipulates procedures for testing lashing steel wire ropes and flat lashing steel wire ropes;
- deals with hazards which could occur when lashing steel wire ropes and flat lashing steel wire ropes are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12195-3:2001(Main)
Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
SIST EN 12195-3:2001

This Part of EN 12195 specifies safety requirements for lashing chains and lashing combinations with chain for the safe surface transport of goods on load carriers, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof. The standard includes only tensioning devices to be hand driven with a maximum handforce of 500 N. It does not give requirements for multi-purpose lover blocks other than to the type of fine calibrated chain and the additional marking  of the maximum hand-operating force.
This part of EN 12195 deals with hazards which could occur when lashing chains are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12195-1(Main)
Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of securing forces
oSIST prEN 12195-1:2008

This Part of prEN 12195 specifies acceleration coefficients for surface transport. It also gives methods of calculation of lashing forces acting on goods on load carriers, lorries, trailers and swap bodies, either on road, on vessels or by rail and/or combinations thereof for different types of load and different types of lashing. It  excludes the hump shunting during railway transport (web lashings see EN 12195-2, lashing chains see EN 12195-3, wire lashing ropes see prEN 12195-4).
The lashing forces to be chosen for calculation in this EN 12195-1 are static forces produced by tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Instructions for the application of calculations are also specified.

  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-8:2024(Main)
Electronic invoicing - Part 8: Semantic data model of the elements of an e-receipt or a simplified electronic invoice
kSIST FprEN 16931-8:2024

This document establishes a semantic data model of an e-receipt or a simplified electronic invoice.
NOTE   In the remainder of this document, when “e-receipt” is mentioned, “simplified invoice” is also meant.
The semantic model includes essential information elements that an electronic receipt needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and domestic trade. The semantic model can be used by organizations in the private and the public sector for documenting by issuing a receipt for the purchase of services and /or goods. It can also be used for documenting a purchase between private sector enterprises. In addition, it has been designed for the use of consumers.

  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19403-5:2024(Main)
Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2024)
kSIST FprEN ISO 19403-5:2024

This document specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials.
If applied to liquids with non-Newtonian flow behaviour (see ISO 3219-1:2021, 3.22), restrictions can apply.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day