iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 545:1994

(Main)

Ductile iron, pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods

Ductile iron, pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods

This European standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for theconstruction of pipelines: - to convey water (e.g. potable water), - with or without pressure, - to be installed below or above ground.

Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für Wasserleitungen - Anforderungen und Prüfverfahren

Diese europäische Norm legt die Anforderungen und die diesbezüglichen Prüfverfahren fest, die auf duktile Gussrohre, Formstücke, Zubehörteile und ihre Verbindungen anwendbar sind zur Errichtung von Rohrleitungen: - zum Transport von Wasser (z.B. Trinkwasser); - mit oder ohne Innendruck; - oberirdisch oder erdverlegt.

Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour canalisations d'eau - Prescriptions et méthodes d'essai

La présente norme européenne prescrit les exigences et les méthodes d'essai associées applicables aux tuyaux, raccords et accessoires en fonte ductile et à leurs assemblages, destinés à la construction de canalisations: - pour transporter de l'eau (par exemple de l'eau potable), - avec ou sans pression, - installées dans le sol ou en aérien.

Cevi, fitingi in dodatki iz duktilne litine za vodovod - Zahteve in postopki preskušanja

General Information

Status
Withdrawn
Publication Date
19-Nov-1994
Withdrawal Date
04-Jun-2002
ICS
23.040.03 - Pipeline and its parts for external water conveyance systems
23.040.10 - Iron and steel pipes
23.040.40 - Metal fittings
Technical Committee
CEN/TC 203 - Cast iron pipes, fittings and their joints
Drafting Committee
CEN/TC 203/WG 1 - Water pipelines under pressure
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
05-Jun-2002
Completion Date
05-Jun-2002
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/136 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on construction products in contact with water intended for human consumption
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 545:1998 - Ductile iron, pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods

Relations

Replaced By
EN 545:2002 - Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Effective Date
22-Dec-2008

Buy Standard

EN 545:1998EN 545:1998
PreviousNext
Standard
EN 545:1998
English language
95 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 545:1998
01-oktober-1998
Cevi, fitingi in dodatki iz duktilne litine za vodovod - Zahteve in postopki
preskušanja
Ductile iron, pipes, fittings, accessories and their joints for water pipelines -
Requirements and test methods
Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für
Wasserleitungen - Anforderungen und Prüfverfahren
Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour
canalisations d'eau - Prescriptions et méthodes d'essai
Ta slovenski standard je istoveten z: EN 545:1994
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
23.040.40 Kovinski fitingi Metal fittings
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN 545:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 545:1998

---------------------- Page: 2 ----------------------

SIST EN 545:1998

---------------------- Page: 3 ----------------------

SIST EN 545:1998

---------------------- Page: 4 ----------------------

SIST EN 545:1998

---------------------- Page: 5 ----------------------

SIST EN 545:1998

---------------------- Page: 6 ----------------------

SIST EN 545:1998

---------------------- Page: 7 ----------------------

SIST EN 545:1998

---------------------- Page: 8 ----------------------

SIST EN 545:1998

---------------------- Page: 9 ----------------------

SIST EN 545:1998

---------------------- Page: 10 ----------------------

SIST EN 545:1998

---------------------- Page: 11 ----------------------

SIST EN 545:1998

---------------------- Page: 12 ----------------------

SIST EN 545:1998

---------------------- Page: 13 ----------------------

SIST EN 545:1998

---------------------- Page: 14 ----------------------

SIST EN 545:1998

---------------------- Page: 15 ----------------------

SIST EN 545:1998

---------------------- Page: 16 ----------------------

SIST EN 545:1998

---------------------- Page: 17 ----------------------

SIST EN 545:1998

---------------------- Page: 18 ----------------------

SIST EN 545:1998

---------------------- Page: 19 ----------------------

SIST EN 545:1998

---------------------- Page: 20 ----------------------

SIST EN 545:1998

---------------------- Page: 21 ----------------------

SIST EN 545:1998

---------------------- Page: 22 ----------------------

SIST EN 545:1998

---------------------- Page: 23 ----------------------

SIST EN 545:1998

---------------------- Page: 24 ----------------------

SIST EN 545:1998

---------------------- Page: 25 ----------------------

SIST EN 545:1998

---------------------- Page: 26 ----------------------

SIST EN 545:1998

---------------------- Page: 27 ----------------------

SIST EN 545:1998

---------------------- Page: 28 ----------------------

SIST EN 545:1998

---------------------- Page: 29 ----------------------

SIST EN 545:1998

---------------------- Page: 30 ----------------------

SIST EN 545:1998

---------------------- Page: 31 ----------------------

SIST EN 545:1998

---------------------- Page: 32 ----------------------

SIST EN 545:1998

---------------------- Page: 33 ----------------------

SIST EN 545:1998

---------------------- Page: 34 ----------------------

SIST EN 545:1998

---------------------- Page: 35 ----------------------

SIST EN 545:1998

---------------------- Page: 36 ----------------------

SIST EN 545:1998

---------------------- Page: 37 ----------------------

SIST EN 545:1998

---------------------- Page: 38 ----------------------

SIST EN 545:1998

---------------------- Page: 39 ----------------------

SIST EN 545:1998

---------------------- Page: 40 ----------------------

SIST EN 545:1998

---------------------- Page: 41 ----------------------

SIST EN 545:1998

---------------------- Page: 42 ----------------------

SIST EN 545:1998

---------------------- Page: 43 ----------------------

SIST EN 545:19
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 545:2010(Main)
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
SIST EN 545:2011

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines outside buildings:
-   to convey different types of water (e.g. raw water, treated water, re-used water) for all types of applications (e.g. water intended for human consumption, for fire protection, for snow making, for irrigation, for hydro-electricity etc.);
-   with or without pressure;
-   to be installed below or above ground.
This European Standard is applicable to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   supplied externally and internally coated;
-               suitable for fluid temperatures between 0 °C and 50 °C, excluding frost;
-   not intended for use in areas subject to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes and fittings cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints and accessories, in a size range extending from DN 40 to DN 2 000, inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this standard.
In addition, reference is made to the performance requirements of couplings, flange adaptors and saddles manufactured for use with ductile iron pipes and fittings.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard + National Annex and/or Foreword
    96 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 545:2010(Main)
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
SIST EN 545:2011

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines outside buildings:
-   to convey different types of water (e.g. raw water, treated water, re-used water) for all types of applications (e.g. water intended for human consumption, for fire protection, for snow making, for irrigation, for hydro-electricity etc.);
-   with or without pressure;
-   to be installed below or above ground.
This European Standard is applicable to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   supplied externally and internally coated;
-               suitable for fluid temperatures between 0 °C and 50 °C, excluding frost;
-   not intended for use in areas subject to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes and fittings cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints and accessories, in a size range extending from DN 40 to DN 2 000, inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this standard.
In addition, reference is made to the performance requirements of couplings, flange adaptors and saddles manufactured for use with ductile iron pipes and fittings.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard + National Annex and/or Foreword
    96 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11267:2023(Main)
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023)
SIST EN ISO 11267:2023

This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/oprA2:2023
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18743:2015/A1:2023(Amendment)
Microbiology of the food chain - Detection of Trichinella larvae in meat by artificial digestion method - Amendment 1: Method validation studies and performance characteristics (ISO 18743:2015/Amd 1:2023)
SIST EN ISO 18743:2015/A1:2023
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4880:2023(Main)
Aerospace series - General technical specification for standard parts
kSIST FprEN 4880:2022
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16062:2023(Main)
Intelligent transport systems - ESafety - eCall high level application requirements (HLAP) using GSM/UMTS circuit switched networks
kSIST FprEN 16062:2022

In respect of pan-European eCall (operating requirements defined in EN 16072), this document defines the high-level application protocols, procedures and processes required to provide the eCall service using a TS12 emergency call over a circuit-switched mobile communications network.
NOTE 1   The objective of implementing the pan-European in-vehicle emergency call system (eCall) is to automate the notification of a traffic accident, wherever in Europe, with the same technical standards and the same quality of services objectives by using a PLMN (such as ETSI prime medium) which supports the European harmonized 112/E112 emergency number (TS12 ETSI TS 122 003) and to provide a means of manually triggering the notification of an emergency incident.
NOTE 2   HLAP requirements for third-party services supporting eCall can be found in EN 16102, and have been developed in conjunction with the development of this work item, and is consistent in respect of the interface to the PSAP. This deliverable makes reference to those provisions but does not duplicate them.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day