EN 12895:2015/prA1:2018
(Amendment)Industrial trucks - Electromagnetic compatibility
Industrial trucks - Electromagnetic compatibility
This European Standard is applicable to industrial trucks, regardless of the power source (called only trucks) as defined in ISO/DIS 5053 1, and their electrical/electronic systems when used in residential, commercial, light industry and industrial environments (specified in EN 61000-6-3:2007 and EN 61000-6-2:2005).
This European Standard specifies:
- the requirements and the limit values for electromagnetic emission and immunity to external electromagnetic fields;
- the procedure and criteria for testing trucks and their electrical/electronic systems.
This European Standard is not applicable to:
- non-stacking low-lift straddle carriers;
- stacking high-lift straddle carriers;
- any pedestrian propelled trucks, excepted those which are equipped with load handling devices which have electrical powered lifting devices;
- trucks intended for use in the public domain ) with maximum speed exceeding 30 km/h;
- positioning system of driverless industrial trucks;
- interaction between systems on the trucks;
- interference to on-board radio equipment;
- equipment connected to AC-mains which is only used when the truck is not being operated (e.g. on board charger).
Flurförderzeuge - Elektromagnetische Verträglichkeit
Chariots de manutention - Compatibilité électromagnétique
Vozila za talni transport - Elektromagnetna združljivost - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2018
Vozila za talni transport - Elektromagnetna združljivost - Dopolnilo A1
Industrial trucks - Electromagnetic compatibility
Flurförderzeuge - Elektromagnetische Verträglichkeit
Chariots de manutention - Compatibilité électromagnétique
Ta slovenski standard je istoveten z: EN 12895:2015/prA1:2018
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
53.060 Industrijski tovornjaki Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 12895:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2018
ICS 33.100.01; 53.060
English Version
Industrial trucks - Electromagnetic compatibility
Chariots de manutention - Compatibilité Flurförderzeuge - Elektromagnetische Verträglichkeit
électromagnétique
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 150.
This draft amendment A1, if approved, will modify the European Standard EN 12895:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12895:2015/prA1:2018:2018 E
worldwide for CEN national Members.
Contents
European foreword . 3
1 Modification to European Foreword . 4
2 Modification to Clause 1, Scope . 4
3 Modification to Clause 2, Normative references . 4
4 Modification to Clause 4, Requirements . 5
5 Modification to Clause 5, Tests . 6
6 Modification to Annex ZA . 7
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2014/30/EU [2014 OJ L96] aimed to be covered. 8
7 Modification to Annex ZB . 9
8 Modification to Bibliography . 9
European foreword
This document (EN 12895:2015/prA1:2018) has been prepared by Technical Committee CEN/TC 150,
“Industrial Trucks - Safety”, the secretariat of which is held by BSI.
This document will be submitted to the Enquiry.
1 Modification to European Foreword
After the 3rd paragraph, add anew paragraph:
“The main changes compared to the previous version are:
− updated normative references;
− new Annex ZA;
− minor typographic corrections.”
In 6th paragraph replace:
“and Annex ZB, which are”
with:
“, which is”
2 Modification to Clause 1, Scope
In the 1st paragraph replace:
“ISO/FDIS 5053-1”
with:
“ISO 5053-1:2015”
In the 1st paragraph replace:
“EN 61000-6-3:2007”
with:
“EN 61000-6-3:2007+A1:2011”
3 Modification to Clause 2, Normative references
Add the following new reference as a first reference:
“EN 55012:2007+A1:2009, Vehicles, boats and internal combustion engines - Radio disturbance
characteristics - Limits and methods of measurement for the protection of off-board receivers”
Replace:
“EN 55016-1-1, Specification for radio disturbance and immunity measuring apparatus and methods ―
Part-1-1: Radio disturbance and immunity measuring apparatus ― Measuring apparatus”
with:
“EN 55
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.