EN 12198-2:2002+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure

This European Standard defines basic technology and specifies general procedures for making and reporting measurements of quantities related to radiation emitted by machinery. It covers the different radiation emissions as defined in EN 12198-1.
This standard applies to machinery as defined in 3.1 of EN 292-1:1991.

Sicherheit von Maschinen - Bewertung und Verminderung des Risikos der von Maschinen emittierten Strahlung - Teil 2: Messverfahren für die Strahlenemission

Die vorliegende Europäische Norm definiert die grundlegende Technologie und legt allgemeine Verfahren zur
Durchführung und Aufzeichnung der Messungen von Größen fest, die auf die von Maschinen emittierte
Strahlung bezogen sind. Sie behandelt die verschiedenen Arten von Strahlenemissionen, die in EN 12198-1
festgelegt sind.
Die vorliegende Norm gilt für Maschinen nach EN 292-1:1991, 3.1.

Sécurité des machines - Estimation et réduction des risques engendrés par les rayonnements émis par les machines - Partie 2: Procédures de mesurage des émissions de rayonnement

La présente Norme européenne définit la technologie de base et spécifie les procédures générales de mesure et d’enregistrement des résultats de mesure relatives aux rayonnements émis par les machines. Elle couvre les différentes émissions de rayonnements telles que définies dans l’EN 12198-1.
La présente norme s’applique aux machines telles qu’elles sont définies au 3.1 de l’EN 292-1:1991.

Varnost strojev - Ocenjevanje in zmanjševanje nevarnosti sevanj, ki jih oddajajo stroji - 2. del: Postopek merjenja emisije sevanja

General Information

• Status: Published
• Publication Date: 09-Sep-2008
• ICS: 13.110 - Safety of machinery
• ICS: 17.240 - Radiation measurements
• Technical Committee: CEN/TC 114 - Safety of machinery
• Drafting Committee: CEN/TC 114/WG 13 - Radiation
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 29-Feb-2024
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 12198-2:2003+A1:2008 - Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure

Relations

• Merged From: EN 12198-2:2002 - Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnost strojev - Ocenjevanje in zmanjševanje nevarnosti sevanj, ki jih oddajajo stroji - 2. del: Postopek merjenja emisije sevanjaSicherheit von Maschinen - Bewertung und Verminderung des Risikos der von Maschinen emittierten Strahlung - Teil 2: Messverfahren für die StrahlenemissionSécurité des machines - Estimation et réduction des risques engendrés par les rayonnements émis par les machines - Partie 2: Procédures de mesurage des émissions de rayonnementSafety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure17.240Merjenje sevanjaRadiation measurements13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 12198-2:2002+A1:2008SIST EN 12198-2:2003+A1:2008en,de01-november-2008SIST EN 12198-2:2003+A1:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12198-2:2002+A1
September 2008 ICS 13.110; 17.240 Supersedes EN 12198-2:2002English Version
Safety of machinery -Assessment and reduction of risks arising from radiation emitted by machinery -Part 2: Radiation emission measurement procedure
Sécurité des machines - Estimation et réduction des risques engendrés par les rayonnements émis par les machines - Partie 2: Procédures de mesurage des émissions de rayonnement
Sicherheit von Maschinen - Bewertung und Verminderung des Risikos der von Maschinen emittierten Strahlung - Teil 2: Messverfahren für die Strahlenemission This European Standard was approved by CEN on 16 October 2002 and includes Amendment 1 approved by CEN on 27 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12198-2:2002+A1:2008: ESIST EN 12198-2:2003+A1:2008

Measurements techniques of different kind of radiations.9 A.1 Electric, magnetic and electromagnetic fields.9 A.2 Optical radiation.11 Annex ZA (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC".13 Annex ZB (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC".14 Bibliography.15
IEC 60050-881:1983, are also applicable. 3.1 operating conditions conditions existing, including operating parameters, during the mode or phase of operation of the machine under test 3.2 no-load operation operation during which the machinery operates without any processed material in place, with all its components and special auxiliaries in operation (pumps, hydraulic set, suction system, etc.) and all moving parts in action (spindles, tables, carriages, etc.) within the limits of its possibilities 3.3 operation under load operation during which the machinery is running in an operational way with processed material and with all its components and special auxiliaries 3.4 phase of operation time interval during which the machine performs a particular function 3.5 operating cycle complete sequence of phases of operation from the introduction of the processed material to its removal or transfer to the next workstation 3.6 measurement time the period during which radiation measurements are made SIST EN 12198-2:2003+A1:2008
...